Finally u shown up! Haha.. Icic.. Hm.. Good idea also. Take both 1st incase there are other buyer offer better price then u. Getting 2 proc huh? By then, check whether are ur northwood is 30cap processor or not (count the small capacitor at the back of the processor, in the middle of the pin). If it was, then the proc got good o/c ability. By then, 1 draw back of the northwood proc is it lack of the SSE3 instruction. But for normal usage, not much different.

Dont worry dude.. P4P800 was a good mobo. It sure will satisfy u. Like mine, P4P800SE didn't disappointed me. Hehe.. Main thing it sill depend on the proc itself. Every proc got their own unique ability. Some might need a little voltage/stock voltage (like mine ) and can fly high. But some, need extra voltage in order to fly high. And also, there were some type was can consider 'dead' proc. No matter how much voltage had pumped, how hard u tweak it just cant fly high.

Yeap. Not just the luck of having god mobo. Proc play an important as well. As for good mobo but on a 'dead' proc, nothing much can be push out.

Yup. PSU the main source of OC. Haha.. Good psu can help to push higher speed. Still rmb my AkuComel exploded case? Haha.. Thats the result of having a low end psu to oc. End up everything is doomed. Acbel? Not bad i think. If im not mistaken, CM PSU also manufactured by this factory. By then see the price and the Watt.

Haha.. Well.. My case for the proc and mobo? Its just my luck. Guess it dont happen always. Maybe once in a blue moon. Yea.. I had learned enough lesson from my previous case. This time, will try to keep the new mobo and proc to stay as long as they can.

@khai84siong

Haha.. Actually for me, i think the acbel will be better then iGreen in term of money reason. As for their performance, i think it should be +- on par. Nothing much different. I got for iGreen is due of my place here lacking of choice. I got no other brand of choosing beside the GigaByte Odin & CM brand. I go for CM is beacuse of the GigaByte odin is using 24pin and cant be take out.

@yukihatsu

Yo bro.. I can see that garage sales section got alof of forumer letting go their S478 proc. Why dont u try ur luck over there?

Alright guys.. Tonight is a cool night.. So i decided to do some benchmark. Here come my new result~

PI 1MB Score:


Sandra Score:


System running @ 240mhz * 16 = 3.84Ghz

Vcore: 1.4v
Vdimm: 2.75v
vAGP: Default
RAM Timing: 2.5-3-3-6

PI 1M Score: 35.281s
*Sandra Memory Bandwidth: 5705
*Sandra Processor Arithmetic: 9319

Ehehe! This my latest result and also the highest speed that i ever achieved in my oc experience. Feeling just like WOW~~ Its damn fast man! Haha.. Well.. Can say that my system can be push on stock setting up 3.76Ghz. Anything above this speed will face system unable to boot but can get into POST mode. And i have to pump vcore & vdimm in order to boot the system up. Impressed by this 3.2E proc.. Really shine!

As for the ram, kinda impressed as well. TCCD chip could run at decent timing 2.5-3-3-6 in 240mhz. Its giving boost for the PI score. Its like WOW~~ FAST! Albert.. I love this ram kit!!

@KahLooN

Owh? I thought TCCD need to be run at loosen timing when running at high speed? Haha.. Maybe im wrong in this. But anyways, this kit really shine! Just pity is 1G kit not 2G kit.. Haha!

@shinjite

Haha.. Die die also wana try that video. Duh.. By then, have u ever use The KMPlayer? I was using this video pack now as my sytem was having problem with k-lite mega. Just wander how im gonna check the fps if i play the video with this player.

@kabukiawie

Wow.. Sold dy! Haha.. Glad! Finally dun nid to collect dust liao! Gain another RM100. Btw, u not going into OC anymore? Then ur Thermalright XP120 wanna sell? Or wanna trade with my Hyper6+?

@Ray

Haha.. 3.8G just for benchmark test! Now back to casual speed. 3.6G~ Scary already la.. After benchmark then fast fast turn back to normal. Haha.

@Sang

Haha.. But TCCD is replacement of BH-5 and got advantage over BH-5.. It drain lower voltage but can go high speed @ tight timing. Impressed of this kit performance. No regret of buying it. By then, whats ur OCZ ram chip? Got any revision no on the ram kit? Might can search on the web to get information about ur ram chip. 3-4-4-8 is the loosen timing, if can try tighten it abit in order to get better responsive system.

@Sang

Owh.. Default was 2-2-2-5? Not bad thou.. Mine was 3-4-4-8 eh. But still able to push til 2.5-3-3-6 @ 240mhz. Guess ur not bad also. Try tighten it when u can. By then, what u doing now? Seems so busy.

@§layerXT

Bro.. Celly 420 was LG775 eh. Dont compare any.. Here were just for old school club.

@Ray

Haha.. Yea! TCCD.. Replacement of Bh-5 in low voltage consumption. Well.. No regert of getting this ram kit from albert. Haha.. Gonna use my current system for another few year. OC just for benchmark and see how far my system can go. Btw, ur 3.2 run at 3.68Ghz all the time?

Owh.. Perform better in loosen timing? Actually P4 platform perform better in high bandwidth rather then tight timing right?

@Sang

Ic.. LOL!! Busy with photo shop. Haha.. Duh.. Printing ya Raya picture?

Lol.. Maybe that what cause my memory bandwidth lower then urs in term of speed. I was having high speed buy low bandwidth. Hm.. Then i guess gotta loosen my timing and test again. Haa..

Lol.. But by default my ram was running on 3-4-4-8. Just during oc i tighten up the timing. Got time wanna try lossen the timing and see how much the performance has been up.

Wah seh.. Just back from a trip and the thread got flooded again.

@shinjite

Any clue for displaying the frame rate in KMPlayer? As im using this player to play most of the video format now due i was having problem with K-Lite & Classic Media Player.

@pengster

Haha.. Cos that night hand itchy and then go push it. But then, the result didnt disappointed me..

@overclockalbert

Yea.. Hehe! Heard from u last time when u tell me about this ram kit. But then, its really amazing this ram kit can hit that high speed with low voltrage. Haha.. Btw albert, as i can run flawless in 2.5-3-3-6 i just wander in P4 platform, should i tighten up the timing or loosen it?

@haha67

Hi.. Welcome to the old school club. By then, about GC bottlenecking.. There is always a bottlenecking gap in between. Even now, a Quad core also bottlenecking 8800Ultra just the bottlenecking gap is smaller and hardly been notice. Nowadays, GC is getting more powerful then the processor itself. No doubt. As for ur rigs, maybe u try push ur current 2.8E to 3.2E to draw near the gap.

@kabu

Lol.. Thought u wanna sell if ya XP120 then:... :hehe By then, wanna change proc? Haha.. Seems like ur interested huh..

@shinjite

Thanks for the info eh! Did the support Real Format? Cos mostly i was watching chinese sub's anime so i need a player which can play real format. Nothing much can expected from real player that why im using 3rd party player.

@overclockalbert

Haha.. Ic.. Cause was thought that intel prefer loosen timing so plan to loosen mine. As for now, reaching 3.84G with 1:1 ratio @ 2.75v vdimm dont cause me any error. So i think it's save form me to stick at current timing.

pengster seems like ur system really cannot go any further. Have u ever to the lower the fsb? Do u face and BSOD on speed below 2.7Ghz?

@KahLooN

Kahloon, i do have the same question as u do. My previous 4x 256mb VR could do memtest @ 255mhz stable but in failed Orthos in less 5mins. Is Orthos prime harder then other priming software or Orthos itself not so reliable?

@KahLooN

Yup.. Was doubting about the reliablility of priming softwares out there. Wander which is the most trustable. Hm.. As for me, i think P4 system should stable on moderate/loosen timing when run on high speed. As this old school require high bandwidth to boost its performance.

@ray

How about memTest? Is that a ram reliability test tools for ram kit?

@KahLooN

Lol.. Same here. Once a while when got the feeling then do abit OC for self satisfy. Hm.. CRT dead? Pity.. Same here.. I was thinking of changing LCD.. By then 22' inch seems too big eh. 19' will be perfect. How about HP? W1907..

Pengster u can squeeze another 300mhz speed count ok already. Since ur using cap palang psu.. That might be a problem of limiting u to get higher speed. 68GT? Yea.. Power hunger monster..

@KahLooN

Wanna get bigger LCD then ur bro? Haha.. But anways, for me i think 19 inch is more then enough. Too big will just screw up my pc table.

@Pengster

Yea.. I agreed with kahloon.. Change to a better PSU will helps in term of ur oc job and also keep ur system run longer life.

@Kabu

Haha.. But Pengster himself who says he was using cap palang psu ma. Hm.. Planning for bigger LCD? I was wander to get a 17inch / 19inch enough already.