ohhh RX Power, it should be above -30dBm meaning LOS Right ??
if PON LINE below -18dBm ???? or what can details please

GPON ONU SFP (non-Realtek)
you told not available on the market mean cannot purchase ???

I mean higher negative number. this particular GPON would display -40dBm. With latest Mikrotik 7.10, no fiber = LOS = no link = no light at SFP = can't access WebGUI/SSH

yes, not available on the market, since this only can be purchased from big SI Vendor like DNB 5G deployment, Office's with own Data Centre, etc...

I just get from SI Vendor, so, I root it, unlock bootloader, flash OpenWRT firmware for WebGUI and SSH

it should be same stick, can stand 90°c and harsh environment, TM want to know what modification I made apart from original SI Vendor firmware.

This post has been edited by Anime4000: Aug 11 2023, 01:25 PM

ohh no need WebGU/SSH no need it
we can use Mikrotik if got Link PON must be below -20dBm right ?
if LOS = will be -40dBm above i am correct

ohh i must buy you then you will do root it, unlock bootloader, flash OpenWRT firmware for WebGUI and SSH

lucky you i know you found big SI Vendor like DNB 5G deployment, Office's with own Data Centre, etc... very good

1. Yes, simple as just look SFP light indicator, update Mikrotik to 7.10+

2. I do the hard part, you all just plug and play, since TM already know me, so I need manage it correctly.

3. Because I also have other project, hire and upgrade company/government network and supply, lucky found who have it, of course I can't disclose who and where I take 😅

yah you can manage it correctly = 100% safety

what details i must give you
if tm visit my house what i must ask tm team to get details to give you to do manage it correctly
what information i must give you details
i will deal you for safety

During Unifi Ultra upgrade,

1. ask technician PLOAM Password
2. get D-Link ONR Serial Number

if can, ask them PPPoE and VoIP Credentials.

I just need PLOAM Password and Serial Number, burn everything into GPON memory and refrain from Factory Reset, later TM-UNIFI OMCI bits gone from MIB table.

PDF manual will be provided, or you can ask me to AnyDesk and I do the changes

VoIP Credentials cant extract ourself with Dlink ONR?
Only TM technician can access or have the credentials to apply?

should be can, just six digit password

yah i ask technician PLOAM Password and PPPoE and VoIP Credentials.
technician will give me VoIP Credentials. right ???

so i can Mikrotik set PPPoE username and password myself

no problem

Yes, that's is your account, you must have it and keep it safe

Sure, this way you can learn to setup Mikrotik

-

i will wait Mikrotik for latest replace RB5009 i am sure will new model coming soon because wanted more powerfully
and once i get unifi ultra offering good i will apply

i know RB5009 no inside wifi so what you use access point wifi 2.4ghz and 5ghz and 6ghz like wifi fast and signal strong and speed higher like ASUS Router always too fast wifi that why i ask

i know Ubiquiti U6 Enterprise to unstable wifi speed due issue region lock

that why i asking for recommend you u tested wifi

Based on your experience or hearsay? I have been using it since March and found no issue.

I just RB5009 + TP-Link M4r, no need high speed wifi for family, just only me and my home lab server can use such speed xD

I have deploy Ubiquiti U6 Enterprise in some Gov office, I just choose Region: License and it unlock all frequency, since this sit inside building, no need to worry about DFS.

Yes. You are 100% right. This is how to unlock the frequency by selecting the correct region. For Ubiquiti U6 Enterprise WIFI 6E, has to use WPA3.

hmm TP-Link M4r i am scared signal weak
that why imported signal strong
mean will safe Ubiquiti U6 Enterprise right i like signal strong to ceiling

RB5009 POE will work Ubiquiti U6 Enterprise or need Ubiquiti Switch POE to work Ubiquiti U6 Enterprise ????
like need setup RB5009 + Ubiquiti U6 Enterprise or RB5009 + Ubiquiti Switch POE + Ubiquiti U6 Enterprise

Guys, have any of you successfully set the PPPoE MTU to 1500? At most I can get 1488 on my Unifi.

Mine max 1480 - if i put more than 1480 my log file will be full of notification ehehe.

TM starting using VRRP to handle multiple PPPoE Server, for client just see only one PPPoE but behind is multiple PPPoE Server,
by doing this aim to 100% up-time

I guess VRRP set is fixed MTU

back then I can get PPPoE MTU 1500 bytes, no need messing with MTU Path Discovery

Hello! Just a question, will this also work for USA models?

I am planning on getting u6 enterprise when i visit the usa next month

almost 1k less than buying locally, but i heard usa models and ap's are hardware locked due to fcc requirement

just wondering what sort of issues i might have in malaysia

i already have local udm se, the region auto set to UK because I downloaded the unifi app using UK app store as it isn't available on malaysia app store

Nobody has the exact answer to your question. I believe those who use the u6 enterprise in Malaysia have obtained the item from local authorised distributers. Based from what you ‘heard’, nobody here can verify the accuracy of the statement. If I were you, I just purchase it since it is power up by Poe compatible with UDM-SE