One problem so far.
If fiber straight go in this xdr5480. How to output landline for phone. (my mom no use handphone at all)


Also how i know i get the correct sfp/fiber port.
Because when i search, these seem got few type of port or protocol. What SC what LC etc.

This post has been edited by josh5671: Sep 3 2022, 02:29 AM

This what I did for having telephone line
https://forum.lowyat.net/topic/5243640

Fiber still direct to Router, map VoIP VLAN to any LAN Port, and use IP Phone with screen!

guide look promising, but SIP something something look like out my reach. not understand single bit from the setting
but at least know it something doable and able to figure it out later.

so voip phone using RJ45 for connection? or RJ11? the phone itself not cheap.
if using RJ45 than grow another problem for me, old house these thing doesnt exist at all.

This post has been edited by josh5671: Sep 3 2022, 10:31 AM

You can use ATA device (Analogue Telephone Adapter)

New thing appear that i dont know.

But this also hard to buy in malaysia i think.

well then, I better you stick with stock ONU

still thanks everyone who got input to increase my knowledge.

will confirm the exact date fiber it coming, and done the RJ45 wiring first.
most likely will buy that XDR5840, quite good for a router and not so expensive too

so i can test the SPF to see whatever it will work as planned or no, then i will back to this thread to check further detail.

what ISP are you using? XDR5840 not support VLAN Internet, only VLAN IPTV, I have tried it even UI in Chinese only

I can source that device for you and let Anime4000 to guide on configuration

TM Unifi. so far only this choice, because asking other just no coverage.
yet know when it arrive

thanks in advance.

if you mean you can source the GPON SFP, i want also, how much the price usually?

https://www.lazada.com.my/products/pon-stic...1707386107.html?

is it usable on old mikrotik RB2011 or need to change to newest model?

This post has been edited by syahpian: Sep 3 2022, 10:47 PM

Should be ok, however there's few caveat eg needs to plug in fibre to ping/telnet to sfp etc. Just review Anime4000 github repo for more info

This post has been edited by izhamsatria: Sep 4 2022, 06:39 PM

This happen when execute ... tx-laser force-on in telnet, it disconnect any connected ONU thay under same fiber split.

apology in advance for potential hijacking the tered (again)

get 300mbps yesterday, with Nokia modem + D-link 1850Z combo.
will be observing here see any good SFP router with RJ11 output

do you want to keep VoIP ?

100% yes. but still not sure how to do and what to do.

*slightly out topic
both ONU and router inside pc room. got one RJ11 line go hallroom for telephone.

If you want SFP router with RJ11/VoIP... I don't think has one,
You need use VoIP Telephone (IP Phone) like Yealink VoIP

yea, not easy to make that build work because my current telephone build is:
DP > computer room > ONU > using previous RJ11 wiring back to hallroom

maybe me not the target audience for ditching ONU lol