mamakap aneip Anime4000

I will ship out to yall tomorrow and sorry for the delay

Nice!
Time to discover Intel SoC xPON ONU SFP!

RTL960x based SFP already full documented by community!

Just PM you for update. then read here.. nvm than.. hopefully will receive soon.. tq for the help.

If not mistaken Allo moved to IPOE a few years back.

Nice, this should be done, not bottleneck by PPPoE making Router SoC crushed

I test around OMCI Traffic Management, github user ccy found meaning behind:

OMCI_TM_OPT (OMCI Traffic Management Option)
0 = Priority controlled
1 = Rate controlled
2 = Priority and Rate controlled

Results:
OMCI_TM_OPT 0


OMCI_TM_OPT 1


OMCI_TM_OPT 2


I can get more download speed when using 1 or 2

Hi...

I using TWCGPON657.. Trying to use on Maxis-TM fiber. Already flash Anime4000 firmware, change the stick identity + PLOAM password. My area use Alcatel-Lucent. Original use ALC ONT but already change to Huawei. This is setting I set

flash set GPON_SN HWTC3793xxxx
flash set GPON_PLOAM_FORMAT 1
flash set GPON_PLOAM_PASSWD 000061xxxx
flash set PON_VENDOR_ID HWTC
flash set HW_HWVER 168D.A
flash set ELAN_MAC_ADDR C4447DB4xxxx
flash set GPON_ONU_MODEL HG8240H5
flash set OMCI_SW_VER1 V5R019C00S125
flash set OMCI_SW_VER2 V5R019C00S125
flash set CUSTOM_OMCI_SW_VER1 V5R019C00S125
flash set CUSTOM_OMCI_SW_VER2 V5R019C00S125
flash set OMCI_OLT_MODE 1


I got O5 status but no VLAN come up.

omcicli mib get 84 > got nothing

# diag
RTK.0> l2-table get entry address valid

^ this one a little interesting.. I got VID 600. (I come from Unifi). After query few time, I can see VID 823 come out n 600 gone.. Next query 600 got and 823 gone. No 621 or 822.

Any point to see whats wrong? Sorry my post lack of info. Try to figure out where to look for error log and command the can help me to figure out more about this.

you have enter VS_AUTH_KEY after changing HW_HWVER and ELAN_MAC_ADDRESS ?

omcicli mib get command only works with ODI DFP-34X-2C2

Will the ping or respond time improve after we ditch ONU and use the GPON SFP ?

should be, but very negligible, when using SGMII, 1000baseX or HiSGMII, 2500baseX, it skip Ethernet Stack, Router is directly to PON interface

if you using 1Gbps, you can have 1.3 or 1.5Gbps or more when using GPON SFP with HiSGMII
lwk523 have done that, first in Malaysia having over 1Gbps internet speed at home

This post has been edited by Anime4000: Jun 3 2022, 07:45 PM

Hard core gamming speed is utmost important even is very negligible. Thanks for the info

1 machine doing 2 works. To convert and to manage.
Not a good idea.

This post has been edited by OlgaC4: Jun 4 2022, 12:06 PM

what is not good?

Oh, you didn't understand...

GPON ONU SFP has own SoC CPU, it just like miniature ONU with SFP Interface.

ODI DFP-43X-2C2 using Realtek RTL9601D processor
T&W TWCGPON657, V2801F using Realtek RTL9601CI processor
Huawei, Alcatel and Nokia SFP using PEB/PEF 98035 ET processor


instead connect using Ethernet Cable for both end,


connect using SGMII (1Gbps) or HiSGMII (2.5Gbps) instead


using SFP skip all Ethernet stuff, router just do router thing, GPON ONU SFP just manage fiber like ONU do

oh Thanks for the info.

Just got my xPON work with DiGi on RB5009. Thanks Anime4000 for the support, I appreciate that.





This post has been edited by mamakap: Jun 4 2022, 08:01 PM

Nice! Luckily it works,
too bad my ALCL OLT not allow it

So Digi not getting symmetrical speed like Maxis account capping?

apparently not,

I just have extra speed on download, and upload is under 100Mbps, 90Mbps realtime

he got extra speed on both direction,