spray where ya ?
the hole in the centre ?

Ya. Absorber is quite easy to identify
Sc quote me 3k for all

That rubber part is called struts is it? Ok, will get mine checked. Tx

another name is absorber mounting.

usually mechanics will ask you to change whole set including absorber so warn you first.   

absorber hard to spoil, usually they will check for signs of oil leak.
if none then change the mounting will do.

you already kana parang when you change whole set where as it's the rubber mount making annoying noise

Ya. Absorber is quite easy to identify
Sc quote me 3k for all

ok ok. But ar i checked my records, 2014 aredi changed absorber mounting both sides wor.

Could it be any other part like the bottom part of the coil spring. I donno whether there oso got another rubber like on the top.

already 5 years since you changed, rubber shrink a bit they rub against each other when hit bump can cause annoying noise.

spray some WD40 on it, let it flow down. if sound goes away then confirm come from that part.

Hi everyone. my Honda City TMO (2010) has been making creaking sounds at the front ('nyek -nyek'...like old spring bed ) when going over uneven surface / the slightest bumps. I took the car to Honda SC a few weeks back when the sound was not so obvious, and they said it was the STABILIZER BAR BUSH. I have since tried to google this and found that worn out stabilizer bush will result in clunking or knocking sound and not creaking.
I have an appointment to replace the stabilizer bar bush in a few days @ RM120+, but  i am not confident it will solve the problem. The SC did say that my front absorbers need to be changed as well since its almost 9 years old. But again, according my Google searches, bad shocks don't creak - they only leak, go dead, etc. (Do correct me if i am wrong). My priority is getting rid of the sound since the ride doesn't seem harsh to me esp since the car is mostly used for short trips.

There is no sound when turning the steering. No other problems with car ride or handling. Everything in the car is stock. Im guessing it is something to do with the coil spring mounting

Really appreciate if those who have faced this problem could share their experience and how it was resolved. Thanks a lot

If spray at-205 onto the mounting need to dilute the solution? Won’t get worse right?

Wonder if can also work for engine mountings or not?

mind telling me where is the place that changes vushings for rm120? all the places ive checked quoted me rm300+

PMed u

RM3k just for the pair of front absorbers?! Mind to share what else they changed together

Watch min 4.14
Buy a "silicon lubricant" and spray at that area of the absorber, as shown in the video.

Mine city 2013. After spraying, the squeaks become less audible.
And to access the absorber, just turn steering wheel all the way left / right. No need to jack up car.

"Silicon lubricant" can get less than rm20, ace hardware, Mr DIY, etc.

yes, open engine bay, see those strut mount on top of front wheel, spray those. (left and right side)
if those struts are compromised kawkaw, the moment you brake, you can feel your car twist (or unstable).

for 9 yo car .. better get it fix outside if cost is your concern. stabilizer bush only cost few bucks per piece. few other possible cause is absorber mounting/absorber/lower arm. can check the price at sparepart shops / lazada / shopee to get an idea how much it cost. SC sure cut throat price ler.

why dont u open the hood n push down the front bumper. get someone to try to identify where the sound coming from.