Old cards have slower read/write speed. Some 2GB from how long ago?

GPS is you want the SR, ADAS, Speed, Route logging features. If don't want then no need GPS.

Use fuse taps and piggyback on existing fuse

https://jwtechreviews.com/

Read in the menu the right button is the lock button. Need to check is it the lock video file button or the lock screen button.

Scared they took it out like Z40

Think got ppl using custom firmware for A129 Duo.

But Vicovation went out of dashcam business in 2019. Still can buy ar?

Actually most dashcam is a good buy if just using for driving only.

But have to take note on the lithium ion battery 70mai is using. If you're parked indoors most of the time then you don't have to worry about the heat much.

But if always park outdoors then consider a supercapacitor dashcam instead.

That's is old model vs new model for Samsung Pro Endurance. The white and blue pro endurance is new model.

DDPAI hardwire kit comes with 3 sizes fuse - ATO, mini & low-profile mini. Yours is the low-profile mini.



All in my Z50 review: https://jwtechreviews.com/2022/08/28/ddpai-z50-dual/

This post has been edited by blurjoey: Sep 8 2022, 02:00 PM

It's actually called low-profile mini. The mini and low-profile mini is actually the same size. Just that the mini has longer feets.

Yes very cheap. All hardwire kit works on all cars. Just make sure you get the correct fuse type for your Myvi.

Only issue if got problem then cannot claim warranty only as buy from taobao.

You can find fuse taps for very cheap in lazada shopee etc

https://www.lazada.com.my/catalog/?q=fuse+t....70a82bd1o0vZQe

But you need to which fuse your Myvi is using 1st.

Usually is install tint 1st then wait a week for the tint to cure then install dashcam on the tint.

Tint you'll need to see as some time will block the dashcam GPS signal.

Viofo don't have regional block like 70mai or DDPAI

What phone are you using?

Means there are no China only version. And there will be english language in the settings.

Try saving a file into the micro SD card using PC. If cannot then means the SD card is dead d.

Usually dead SD card will still let you read the files while unable to write into it.

Old Pro Endurance - 32GB, 6GB and 128GB. It's read speed is 100 MB/s and write speed is 30 MB/s.

New Pro Endurance - 32GB and 64GB, it's read speed is 100 MB/s and write speed is 30 MB/s. While 128GB and 256GB it's read speed is 100 MB/s and write speed is 40 MB/s.

Faster write speed is better if recording in higher resolutions.

Try updating with the latest firmware and see if that fixes the date & time issue or not.

If latest firmware still reset then it means is the capacitor failure. You'll need to claim warranty with the seller.

Many cases like this in DDPAI community group for Z40.

https://www.facebook.com/groups/ddpaicommunitymy

The wordings on the 2 cards looks different. 1 is very nice and clean while the other looks sloppy. Fake maybe?

Anyway these cards won't last long if use in dashcams as it need to read and write non-stop while you're driving.

You'll need to look at the write speed also not just the read speed. Get High Endurance cards which is for use in dashcams.

CDM test results will also be affected with the card reader, the USB port, etc. Many factors. If you got old card reader or USB 2.0 ports then the test results will be affected.

This post has been edited by blurjoey: Sep 15 2022, 09:43 AM