But that is for the processor isnt it?
sorry i just now didnt mention that i asking about the RAM.

fran u reply at wrong thread la.....
if for the ram cooling u can buy the AllnGap Customize Ram cooler
or u can try OCZ or Corsair 1,another way is buy 1 120mm high CFM fan focus for the RAM

No, you misunderstand my question ed...
When i buy the P5N32-E SLI motherboard, the spec show it support up to 800mhz RAM.
I want to ask is this motherboard can use 1066mhz RAM?

I do using Corsair XMS2 6400C4D DDR2 2GB 800Mhz, with the Dominator Fan Cooling already.
Planning to change the Corsair XMS2 8500C5D DDR2 2GB 1066Mhz...
Some people tell me can but some say can not...

sure can lah,who said cant is a noob
haha

through OC only can... even my DQ6 box also write... 1066 can reach by OC not native... y bother when u can OC kaw kaw...?

oO~
Thanks alot, then going to sell my 6400 and get a 8500.
Hehe~

---

Added on August 24, 2007, 12:09 am1 more question,
DQ6 can OC til how many FSB?
Posible to 2000?

This post has been edited by sammizai: Aug 24 2007, 12:09 AM

2000.......
i know have ppl oc max FSB is around 510 = 20xx........
ur ram is wht chipset? D9GMH? how much u want sell??

actually tat's ther rated FSB... tat's wat i got... here...
though it's pretty hot i dare not keep it 24/7... prefer to maintain temp at below 60...

dude before u think of overclocking fsb.. remember it depends on ure proc..

proc has a limit of overclocking on fsb...

thats y u see pp selling certain procs more expensive..
heck i sold my e6600 for rm1.1k last week...

I dono how to check wo...
What i know is Corsair XMS2 6400C4D DDR2 2GB
PC2-6400 CAS4

---

Added on August 25, 2007, 1:47 amFor now, I can OC my CPU base on my current knowledge got 2 way.
1 is Rated FSB = 1475, with FSB 368.75 * 8 = Core Speed 2950
2 is Rated FSB = 1315, with FSB 328.75 * 9 = Core Speed 2958.75

Both is OC until MAX bease on my current knowledge...
I OC this in BIOS.
RAM ratio 1:1.
For the 1st way, 1475 is the highest i have tested. If use 1480, then fail to boot the BIOS already...
For the 2nd way, 1315 is also the highest i have tested. If use 1316, then fail to boot into Windows...

Which is the better way to OC my CPU? 1st or 2nd?
I hear of some ppl say higher multiper is better?

This post has been edited by sammizai: Aug 25 2007, 02:09 AM

my pentium dual core E2160 can do 400FSB la... my E6300 also did 500+ FSB d la... see the link i provide above...
urs should be no sweat... try 400x8... then 400x9... if 400 x9 can then slowly try add 10 by 10MHz to the FSB... and make sure u can enter windows cuz sometimes we can boot to BIOS but not Windows... i think it's cuz of the timing... remember to lock ur PCIe frequency to 100 and ur RAM i advice not to go more than 1000MHz @ 5-5-5-18... after u get stable OC only u reduce ur timing... from my exp... Corsair C4 DDR800 RAM can go up to 1200MHz stable...

If u fail... Asus is not a good board...

This post has been edited by t3chn0m4nc3r: Aug 26 2007, 01:25 PM

ur OCing a Quad core on the P5N32-E SLI? this board not really good for OCing quad cores man. does well with C2D...but ull hit FSB walls with the Quads.

also, seems that different bios versions has different results...better to research online.

ooo... so it's the proc at fault...

Its the motherboard at fault due to the GTL voltage. P35 will do good with Quad.

Ya, i hear of ppl telling that my Mobo having problem to clock quad...
I have some try on the OC 1st.
Later up post my result~

Ops...off topic.
If i have 2 pairs of ram, 2x1gb...
crucial and corsair, both same timing 4-4-4-12 but different chips...
still can running dual channel? 2x2x1gb?

TQ...

Yes, no problem, but do note that ram won't be so optimized.

Hmm, today result....
If get abit higher then cant boot BIOS already...



Attached thumbnail(s)

noob Q..wuts the GTL voltage??

i believe that it wont effect an E6750 OC performance...is it??

increase ur voltage la... booting up at tat voltage at tat speed is impressive enough...