nice clock bro...
mind to share how much u bought it?

btw im usign AMD athlon 64 x2 5200+ Windsor AM2
Mobo ABIT AN52S, ram 1gb x2 kingston DDR2 667,
how do i overclock my processer since now its 2.6 ghz, wanna oc to 3 ghz

1.45v. Ermm...If compare to brisbane 3600, BE2350 need higher vcore to reach 2.9GHz.
Bro, 1.40v stable??

-pWs-

hrmmm 1.4 actually can boot but prime not stable....i think this is due to my psu only at 400watt....as this rig is my micro rig...

the amazing part of this proc is running cooller as i use athe stock HSF and Crampy case(Microfly)...

---

Added on August 5, 2007, 2:54 am

hrmm RM300@robyn

This post has been edited by ^666^: Aug 5 2007, 02:54 AM

help. i need someone to explain the options under Geniebios for my mobo. I still don't quite understand the terms for k8 overclocking.

CPU FSB Ratio setting (options: auto, 4x-10x)
so this is the cpu multiplier? If i select 9, isit actually 9.5?

CPU n NB bus ratio setting (options: auto, 1x-5x)
this is the HT link ratio? (keep it under 1000 thing?)

DRAM speed (options: 400,533,667,800,auto)
this is the dram divider?

So, to oc a little, I shall:
up vcore to 1.3v, up vdimm 2.2v, select 9x cpu multiplier, change bus speed from 200 to 250, select ddr667 divider, select 4x for HT link?

hmm.. set the HTT to 231x13 vcore 1.48.. this is the setting that i use on my proc with m2n32 mobo..
for my crucial ram setting i use 4-4-4-12 2.0vdimm divider 800..

for the ram setting im not sure... u need to tweak it ur self to find the suitable and stable setting...

@slash

CPU FSB Ratio setting (options: auto, 4x-10x)
so this is the cpu multiplier? If i select 9, isit actually 9.5?
I believe you must set auto to get 9.5 and disable CnQ feature

CPU n NB bus ratio setting (options: auto, 1x-5x)
this is the HT link ratio? (keep it under 1000 thing?)
Yup, make it x4 if you're planning somewhere below 250 or x3 if over 250

DRAM speed (options: 400,533,667,800,auto)
this is the dram divider?
Yup, RAM divider. x9.5 multiplier should follow x9 RAM divider

So, to oc a little, I shall:
up vcore to 1.3v, up vdimm 2.2v, select 9x cpu multiplier, change bus speed from 200 to 250, select ddr667 divider, select 4x for HT link?
Change HTL to x4, change bus speed bit by bit like 5~10mhz, change RAM divider if the RAM holding you back. Brisbane can go further with stock vcore and vdimm

This post has been edited by afosz: Aug 5 2007, 08:01 AM

ok will try later. oh yeah. how abt ram timings? got a rough guide for tracers?

This post has been edited by slash: Aug 5 2007, 06:16 PM

No le..couldn't find the original question..only get to online once a week since new sem started in usm. Thats why my reply like damn far from my

Gonna overclock my Windsor & NF-M2 nview like crazy soon..got lotsa cooling stuff just waiting to be used..thinking of grabbing another bunch of allngap's peltiers and chaining them in a liquid cooling loop (planning to experiement on sub zero coolants, and try out a special little idea which I'm planning for my future rig). Backed up a good portion of my data, will start the OCing once I'm done. Been kinda nervous about data corruption since my last HDD went nuts.

hi,

wondering if u can help me out. still noob oc although read a lot but when in bios still a bit confused.



k8<->NB HT width <--- whats this?
onboard Gpu overclock [425] <---- this one?

im using biostar tf 7050 mobo. if have any good links on how to oc amd step by step please post thanks.

NB HT width is the HT multiplier. HT link = HT multiplier X HTT. Keep the HT link around 1000 when you OC it.

---

Added on August 6, 2007, 1:39 pmthe original question is just 1 post above mine

btw, which windsor that you are using now?

This post has been edited by dblooi: Aug 6 2007, 01:39 PM

what mobo is the best for am2??

Your budget?
Biostar/ DFI/ ABIT. All those brands are good.

-pWs-

around what budget can get best mobo??

How much you can spend for your mobo 1st?
Around 300-400 you can get the decent mobo.

-pWs-

This post has been edited by -pWs-: Aug 6 2007, 05:54 PM

thats should be good to me

asus mobo only good in high end product!

but good in co ar??

---

Added on August 6, 2007, 5:58 pmi mean OCing

This post has been edited by guckks: Aug 6 2007, 05:58 PM

Asus M2N-E good in stable if u no oc .
this board quite limit in overclock ability . max ram volt 1.95 only .. max core volt 1.55v .

Hi all...... Ok i just Oced my rig...

AMD X2 3600+
Abit KN9 SLI
Corsair XMS2 6400C4 512MBx2

Want to update n looking for ur suggestion...