Go oc somemore. Your processor deserved to run at 2.9GHz and above.
Stock vcore for this current speed???

-pWs-

http://valid.x86-secret.com/show_oc.php?id=225567

just got to it

---

Added on August 6, 2007, 6:59 pmso for at least rm400 - rm 500 range can get what mobo for oc??

This post has been edited by guckks: Aug 6 2007, 06:59 PM

o ya i forgot.... Vcore 1.3v and vdimm i put 2.0v...izzit ok....

Your ram default vdimm is 1.8v right??? If i am not mistaken, your ram is 800Mhz at CL4.
2.0v is a bit too high at the speed and timing you currently achieve now if default vdimm is 1.8v
Other settings should be no problem.

Bro, oc somemore. Brisby is nice to oc.
Overclock until 2.9Ghz

-pWs-

This post has been edited by -pWs-: Aug 6 2007, 09:12 PM

yaaa i want to Oced more but little confuse about vdimm.... how to set....plezz help me... wat should i set to my vdimm...

Bro, you have to try it yourself.
I cant tell exactly how much the vdimm u need for different speed and timing.

-pWs-

ok tonight i will try... push it to limit ....

I need some advise on my OC. Still new in OC, I manage to OC little.

My Spec:
AMD Brisbane 4000+
Asus M2N32 Sli Deluxe
Corsair Twin2x 6400 1GBX2 CL5

From 2.1Ghz, I manage to up to 2.4ghz whithout any decrease in HT/Ram divider. I put vcore, vdimm (how 2 check current voltage?) as auto.

Core: 2400 mhz
Bus Speed: 230
Multiplier:10.5 (default auto)
Ram Speed: 402mhz (dual channel)
Vcore: 1.392 (Auto-CPU-Z able detect correctly as it is same in BIOS)

Questions:
1. How 2 check current vDimm?
2. Should I adjust my vcore if want to increase more? How much?
3. System is stable when manage to boot to windows. There are times when it system not able to boot from cold boot and reset will solve the issue. Is the vcore too low or auto issue?
4. How 2 check my Corsair's chipset?

This post has been edited by capriodimitri: Aug 7 2007, 09:57 AM

1. I think u can check Vdimm n Vcore through your Asus Monitoring Program.
2. Cannot tell you exactly due to different hardwares yield different results. Remember to Orthos for around 8 hours to ensure stability. If not stable, it is either not enough Vdimm or Vcore. There are a lot of reasons why the system is not stable, but basically is like that.
3. A lot of reasons. If no oc, got cold boot?
4. What is the version of your corsair ram? There is a label on top of the ram. You can check it in one website, dunno where though

Remember to keep the HTLink under 1000Mhz to ensure stability.

-pWs-

Oh, thanks a lot for super quick reply. I can check V-core but didnt see V-dimm, is there any third party software? My mobo, ASUS M2N32 Sli Deluxe should able to run 1600mhz HT in stability. I do not have power on issue when I OC to 2.3GHZ, only when I up to 2.4GHZ from Bus speed 220 to 230.

If I put my vcore to auto, will it increase automatically to adjust its speed? Or I should put manual?

One of the computer shop offer me CM Aquagate Liquid cooling for both CPU and GPU for just RM399. Damn cheap as it is old model (those that can sit internally by occupying 2 bays). However, it just mention it support up to AMD 940 socket, I am not sure if AM2 can be supported.

Better manual set your Vcore.
As far as I know, AM2 and 940 is not the same one. Better buy with AM2 supported cooler

For the vdimm, I have no idea which software can show already. In bios, I think you can view it at the hardware monitoring page.

-pWs-

-pWs- i have problem.... last night when i Oced to 2850mhz....then i run orthos.... after 1 hour and 30 minit... my pc hang...my vcore 1.3v n vdimm 1.8v as u say earlier.... should i increase vcore or vdimm... or both of them....

This post has been edited by Elite_Anbu: Aug 7 2007, 11:00 AM

What ram divider you use? How much is your ram speed and timing at 2850Mhz??

-pWs-

This post has been edited by -pWs-: Aug 7 2007, 11:09 AM

i think my ram divider is 7 and my timing 5 5 5 18

Your running ram speed is 407MHz right?
If this the case, you try to increase a small step of Vcore
After that, try to Orthos again.

-pWs-

This post has been edited by -pWs-: Aug 7 2007, 11:18 AM

I OC my Bribane 3600 to 2375Mhz also face problem (25% OC)...

Sometimes (seldom though), I restart computer, it shows (the black screen) in safe mode, Press F9 to continue, it revert back to 1900Mhz...

I put at 250Mhz, & adjust the HT to 4X. make sure it is 1000Mhz range. Disable Cool & Quiet. Set RAM at 533Mhz. (I m using Kingston 667 Dual Channel)

I m using Biostar Geforce 6100, and Acbel I-Power 450W. PSU not enough Power ? How to check system stability beside Nvidia ?

yaa right.... ok i will try.... thanks -pWs-

Full details of your rig pls?
Your ram is it plug near to the cpu?

No problem dude. My pleasure

-pWs-

My RAM not put near the CPU... already put as far as I can!!

What HT/ RAM divider ? I just set my RAM to 533Mhz in BIOS, though my RAM is 667Mhz. But, after OC, the RAM is 533 X 1.25 =667Mhz...

My Kingston RAM can not OC one, it will automatically restart computer if I put 667Mhz x 1.25 = 833Mhz

MY rig: Biostar Geforce 6100 AM2
Kingston 667 1 GB x 2
Acbel I POwer 450W
GAlaxy 8500 GE
Dell 19" Wide Screen Monitor

I do not see any problem for your overclock setting.
Here one suggestion for u.
Try to plug the ram to the nearest slot to the CPU. After that, try to oc again.

-pWs-