All PCIE X1 should work in PCIE X16. I have the TX3000E and it works on PCIE X16.

I guess you should try to plug it into another PCIE slot or another PC to verify whether it is a system configuration or hardware issue.

Guys.. noobies looking for some help.

I've just started using TIME 100MB and was given EC230-G! TPLink Wireless Router. However the coverage is not good at all as my 2nd floor is not covered 100%. I bought Tenda A18 but somehow whenever I tried configure to extend the wireless, my TIME Router always shows amber light when the Tenda connected to it.

Is there any tweaking needed to tweak the sotck TIME router as the Tenda A18 is just simple connection wizard.

Can anyone help please..

Hi I do have a Tplink T9UH sitting in it’s box unused(since I’ve upgraded my laptop), I do have an old desktop(usb2.0 ports only) and has an Dlink DWA-172 usb WiFi adapter on it

Is it worth “retiring” the DWA-172 for the TP-link T9UH?

Using Unifi 100 mbps, AX92U mesh WiFi system

Or should I continue using the DWA-172?

This post has been edited by yongtjunkit: Dec 22 2020, 03:02 PM

Hi ...

TM will be installing my 30mbps unifi this Saturday. May I know which router should I change. I might change my plan to 100mbps down the road within 12mths.

Currently staying in a 3000sft house.

Budget RM300 to 400.

Thanks in advance for your reply.

Just got myself a new Archer AX20 after read some of the positive comments about it here. This is to replace my Dlink Covr 1100 given by TM during installation last few days ago.

Probably a good time to consider getting a 160Mhz router considering that it's natively supported on Snapdragon 888 and a ton of devices are going to use that SoC.

Though personally I am not a fan of 160Mhz as the range is weaker compared to 80Mhz mode.


Xiaomi 11 announced with Wi-Fi 6 160Mhz and 4096QAM

This post has been edited by blacktubi: Dec 23 2020, 09:40 PM

Hi All, IT dummy here. I would like to seek suggestion on good performance router:

House type: Landed
Size of house: 2080 Square feet & 2 and a half floors
Features required: I just want to stream 4k videos, be it on Youtube or Astro on my TV at ground and 2nd floor
Number of devices connected to WiFi: 7-8
Internet Speed:
Currently 100mbps unifi plan, tested via LAN cable (1st floor) and is able to get ~120mbps download speed (via fast.com). However, WiFi via mobile can only get ~7 mbps downstairs (ground floor). WiFi signal is normally full or next to full bar. Checked WiFi channel and there's no obvious overlap of WiFi frequency (on 2.4GHz)

Budget: RM 300 - RM 500

DISCLAIMER: i don't know any tech jargon and the above summary is from a friend of mine.

THANKS for your time and recommendation in advance.

don't use 2.4Ghz band if you want to enjoy more than 50mbps on wifi. use 5Ghz band. Tplink Ax20 can do the job and it's cheaper too.

from your msg
you have poor wifi coverage on gnd floor .

you have 2 options.

1. mesh network tplink M4 M5 M9 depends on your budget
or
2. get 1 tplink AX20 . use in AP mode . wire LAN it to your Main router
position this ax20 at the ground floor stair case wall . or around here .
this will give excellent coverage on the gnd floor .

a few red light here.

big house , 30 mbps ,

how many users ..?
are users doing heavy downloads , stream netflix or similar , youtube ?
cos 30 mbps may be a bottle neck .

big house need mesh .
can consider tplink M4 , M5, M9 depends on your budget.

Yeah i subscribe to 30mbps at the moment if not sufficient will upgrade to 100mbps.

How many user: 5 user
Usage: Occasionally Netflix and mostly youtube and normal internet surfing.
I'm considering to add on 2pcs of Deco M5 with my 30mbps plan

Hi
I need quick help
Just changed my router from Tenda AC1900 to TPLink AX50. But some how i cant connect to my unifi using PPPoE. Sames username and password. Triple checked.
Still cant. Even reboot the router and modem as well.

Firmware 1.0.8 Build 20200426 rel 65338(5553)
Hardware version Archer AX50 v1.0

Appreciate advise

Thanks

This post has been edited by nasrule: Dec 24 2020, 03:17 PM

Which ISP? Unifi/Maxis/TIME?

Thanks

From the post, he/she said Unifi.

In that case, he has to check whether VLAN is set to Unifi Profile.

Thanks

Can share which vlan for unifi internet?
Im dont connect hypptv

My AX50 don't have unifi profile, or do i need to update firmware?

Try to update the firmware.
If still don't have Unifi Profile. Try using custom method.

Thanks

Hi Bro
managed to get it connected.
need to turn on the IPTV Setting, then only can see unifi profile.
funny how they put this way.

Thanks for the assistance

This post has been edited by nasrule: Dec 25 2020, 08:23 AM

You're welcome.
Merry Christmas Bro.

Phone huawei series likes mate 20 pro , p30 pro and above model have support 160mhz i thinks. Maybe performance below wifi 6 160mhz phone. Thanks for info..