Outline ·
[ Standard ] ·
Linear+
AMD Ryzen /Threadripper OverClocking V1.1, big or small, share your results here...
SiLveRGuN
|
Mar 10 2021, 10:32 AM
|
New Member
|
QUOTE(SiLveRGuN @ Mar 10 2021, 10:31 AM) Hi everyone, I have a 5900x and I kept it at stock settings for PBO. However when playing COD:Warzone the temps can go up to 82c-84c on average but no performance drop whatsoever. Below is my setup: Processor - 5900x Cooler - NZXT X73 Kraken 360 Mobo - X570 Aorus Pro Wifi Casing - Corsair Carbide 275R Anything I could be doing wrong here? Thanks. Also, I have tried with platform thermal throttle limit and have it set at 80. Will that be gimping my processor's performance in anyway?
|
|
|
|
x800
|
Mar 11 2021, 06:09 PM
|
|
QUOTE(IamNOT @ Mar 10 2021, 08:18 AM) For Ryzen 5600X, what voltage should I target for peak voltage? If let it run auto, it will peak at 1.45V. If I put Curve Optimizer -30, it would still peak at 1.4V. All core load will stay at 1.3~1.35V Is it safe that way for daily usage? Idk how true this is, but i read some reddit and other forum posts out there saying that 1.35v++ is ok if only a few cores being boosted in short bursts, but its getting unsafe if that 1.35v++ is during sustained allcore boosts. QUOTE(SiLveRGuN @ Mar 10 2021, 10:32 AM) Also, I have tried with platform thermal throttle limit and have it set at 80. Will that be gimping my processor's performance in anyway? The cpu will definitely reduce its boosts a bit when it reaches that set temperature, but if u feel that it doesnt affect your specific game performance then why not. This post has been edited by x800: Mar 11 2021, 06:45 PM
|
|
|
|
IamNOT
|
Mar 12 2021, 11:03 AM
|
Getting Started
|
QUOTE(x800 @ Mar 11 2021, 06:09 PM) Idk how true this is, but i read some reddit and other forum posts out there saying that 1.35v++ is ok if only a few cores being boosted in short bursts, but its getting unsafe if that 1.35v++ is during sustained allcore boosts. The cpu will definitely reduce its boosts a bit when it reaches that set temperature, but if u feel that it doesnt affect your specific game performance then why not. Yea.. With AMD CPU so difficult to find now, I am keeping PBO disabled for safety. It never go above 1.2V with -0.068V offset.
|
|
|
|
x800
|
Mar 12 2021, 07:03 PM
|
|
Finally able to snatch the Firestrike top spot for 2080ti+5600x after tweaking the PBO CO, PBO Offset and Vcore Offset wheee~ Leaderboard2nd guy had more Graphics score as me, but the PBO tweak made me pull ahead in the Physics and Combined score and sums up in Overall score Comparison of individual resultsah_khoo is right, no need manual OC anymore Edit: corrected links and added context This post has been edited by x800: Mar 12 2021, 07:30 PM
|
|
|
|
owikh84
|
Mar 23 2021, 11:48 PM
|
i7 Clan
|
Late to the party but I finally managed to grab another unit of 5900X that's IF 1900-capable. CTR RC5 says it's a Platinum sample but it could be wrong as this tool doesn't seem to allow me to proceed for tuning. Maybe bugged with the current BIOS etc I don't know though Quickly put on my test bench, it appears that FCLK up o 1966 is POST-able, 1933 benchable but throwing WHEA errors, 1900 is error free so think I will just settle at 1900 for 24/7. RAM OC on this tiny board is super easy, auto ProcODT and Rtt will work even at DDR4-3800 with minimal tweaking. Anyway I've finetuned the subtimings a bit to make them looked nicer. 3800 14-15-15-14-28-1T @ 1.49v | IF 1900My setup:5900X ROG Strix B550-I | BIOS 2003 2x16GB TridentZ Royal 4000C17 B-die TUF 3080 AX1200i Dimastech EasyDual V2.5
|
|
|
|
owikh84
|
Mar 24 2021, 08:03 AM
|
i7 Clan
|
5900X vs 10900K at the same RAM speed and hardware setup. TM5 Anta777 Extreme1 completed in 2 vs 3 hours because 12C/24T vs 10C/20T. 5900X | 3800 14-15-15-2810900K | 3800 14-15-15-28
|
|
|
|
owikh84
|
Mar 24 2021, 09:31 AM
|
i7 Clan
|
It's time for some 1080p gaming benchmarks... 5900X | 10900K, both cooled by EK-Supremacy EVO RGB ROG Strix B550-I, BIOS 2003 | Maximus XII FORMULA, BIOS 2005 2x16GB TridentZ Royal 4000C17 B-die @ 3800 14-15-15-28, cooled by 2x 60mm fans TUF 3080 BIOS V2, OC +150/1100 | driver 461.81 AX1200i Dimastech EasyDual V2.5 Battlefield V: 1920x1080, Ultra, DX12 CPU | Min FPS | Avg FPS | 10900K @ 5.1 GHz All-Core | 170 | 195 | 10900K @ 5.3 GHz TVB | 178 | 197 | 5900X @ 4.6 GHz All-Core | 184 | 197 | 5900X @ 4.775/4.55 GHz CCX | 185 | 197 | 5900X @ PBO +200 MHz | 181 | 196 | 5900X @ CO -30/25 +200 MHz | 186 | 197 | Metro Exodus: 1920x1080, Extreme, DX12 CPU | Min FPS | Avg FPS | 10900K @ 5.1 GHz All-Core | 9 | 74 | 10900K @ 5.3 GHz TVB | 9 | 74 | 5900X @ 4.6 GHz All-Core | 9 | 73 | 5900X @ 4.775/4.55 GHz CCX | 11 | 73 | 5900X @ PBO +200 MHz | 11 | 73 | 5900X @ CO -30/25 +200 MHz | 10 | 73 | Horizon Zero Dawn: 1920x1080, Ultimate, DX11 CPU | Min FPS | Avg FPS | 10900K @ 5.1 GHz All-Core | 50 | 155 | 10900K @ 5.3 GHz TVB | 49 | 154 | 5900X @ 4.6 GHz All-Core | 64 | 154 | 5900X @ 4.775/4.55 GHz CCX | 64 | 153 | 5900X @ PBO +200 MHz | 66 | 153 | 5900X @ CO -30/25 +200 MHz | 65 | 153 | Shadow of the Tomb Raider: 1920x1080, Ultra, SMAAx4 | DX12 CPU | Min FPS | Avg FPS | 10900K @ 5.1 GHz All-Core | 118 | 161 | 10900K @ 5.3 GHz TVB | 121 | 164 | 5900X @ 4.6 GHz All-Core | 123 | 165 | 5900X @ 4.775/4.55 GHz CCX | 122 | 164 | 5900X @ PBO +200 MHz | 122 | 165 | 5900X @ CO -30/25 +200 MHz | 123 | 165 | Grand Theft Auto V: 1920x1080, Very High, MSAAx4 | DX11 CPU | Min FPS | Avg FPS | 10900K @ 5.1 GHz All-Core | 6 | 182 | 10900K @ 5.3 GHz TVB | 6 | 182 | 5900X @ 4.6 GHz All-Core | 4 | 179 | 5900X @ 4.775/4.55 GHz CCX | 5 | 181 | 5900X @ PBO +200 MHz | 3 | 180 | 5900X @ CO -30/25 +200 MHz | 4 | 180 | Watch Dogs: Legion: 1920x1080, Ultra, DX12 CPU | Min FPS | Avg FPS | 10900K @ 5.1 GHz All-Core | 77 | 111 | 10900K @ 5.3 GHz TVB | 79 | 110 | 5900X @ 4.6 GHz All-Core | 73 | 110 | 5900X @ 4.775/4.55 GHz CCX | 72 | 110 | 5900X @ PBO +200 MHz | 69 | 109 | 5900X @ CO -30/25 +200 MHz | 69 | 110 | This post has been edited by owikh84: Apr 10 2021, 04:39 PM
|
|
|
|
teetaatee
|
Mar 24 2021, 09:40 AM
|
|
Hi everyone, just sharing here 5900x @ 4.5ghz all clock, 1.15V, max temp load at 70C id cooling frostflow 360 corsair 5000D Airflow msi x570 tomahawk 32gb x 2 hyperx fury at 3200mhz cl16, nothing much here but considering to change to Zadak or Dominator Bdie This post has been edited by teetaatee: Mar 24 2021, 09:40 AM
|
|
|
|
owikh84
|
Mar 24 2021, 10:07 AM
|
i7 Clan
|
QUOTE(teetaatee @ Mar 24 2021, 09:40 AM) Hi everyone, just sharing here 5900x @ 4.5ghz all clock, 1.15V, max temp load at 70C id cooling frostflow 360 corsair 5000D Airflow msi x570 tomahawk 32gb x 2 hyperx fury at 3200mhz cl16, nothing much here but considering to change to Zadak or Dominator Bdie Don't use HWMonitor as it only reports package temp. Use HWiNFO64 for checking voltages and temps etc. I personally will focus on that Tctl/Tdie reading for CPU die temp.
|
|
|
|
teetaatee
|
Mar 24 2021, 10:10 AM
|
|
QUOTE(owikh84 @ Mar 24 2021, 10:07 AM) Don't use HWMonitor as it only reports package temp. Use HWiNFO64 for checking voltages and temps etc. I personally will focus on that Tctl/Tdie reading for CPU die temp. alright let me try try
|
|
|
|
SiLveRGuN
|
Mar 25 2021, 02:30 PM
|
New Member
|
QUOTE(teetaatee @ Mar 24 2021, 09:40 AM) Hi everyone, just sharing here 5900x @ 4.5ghz all clock, 1.15V, max temp load at 70C id cooling frostflow 360 corsair 5000D Airflow msi x570 tomahawk 32gb x 2 hyperx fury at 3200mhz cl16, nothing much here but considering to change to Zadak or Dominator Bdie Weird I can't even boot my 5900x @4.5 all clock with 1.15v. I must be doing something wrong. Can only boot and game stable at 1.3v
|
|
|
|
owikh84
|
Mar 27 2021, 03:41 PM
|
i7 Clan
|
5K! Weekend benching with Micron E-die from Ballistix Elite 2x8GB 4kC18 kit. 5000 CL18-26-26-46-1T @ 1.50v: unoptimized Board/IMC/RAM are strong, basically I just selected the RAM frequency, manually keyed in the primary timings, vDIMM 1.50v, vSOC 1.2v (auto 1.25v ) As mentioned above, this is still my early test without anything being optimized. This post has been edited by owikh84: Mar 28 2021, 09:17 PM
|
|
|
|
teetaatee
|
Mar 27 2021, 03:47 PM
|
|
QUOTE(SiLveRGuN @ Mar 25 2021, 02:30 PM) Weird I can't even boot my 5900x @4.5 all clock with 1.15v. I must be doing something wrong. Can only boot and game stable at 1.3v diff sample of cpu kot
|
|
|
|
SiLveRGuN
|
Mar 28 2021, 01:52 AM
|
New Member
|
QUOTE(teetaatee @ Mar 27 2021, 03:47 PM) True true.
|
|
|
|
x800
|
Mar 28 2021, 10:05 AM
|
|
I envy ppl who won the silicon lottery... Never won any silicon lottery in my life, all my past and current cpus are just average bin. Dont have the privilege of some countries where you can return/exchange a cpu because its not a good bin. Nonetheless I just work with what I have lol. Anyone have a spare renoir or micron rev E lying around? hands itchy already nothing more I can play around with on my 5600x
|
|
|
|
nrw
|
Mar 29 2021, 10:12 AM
|
|
QUOTE(x800 @ Mar 28 2021, 10:05 AM) I envy ppl who won the silicon lottery... Never won any silicon lottery in my life, all my past and current cpus are just average bin. Dont have the privilege of some countries where you can return/exchange a cpu because its not a good bin. Nonetheless I just work with what I have lol. Anyone have a spare renoir or micron rev E lying around? hands itchy already nothing more I can play around with on my 5600x I still have a 4650G over here. Just an average chip though.
|
|
|
|
owikh84
|
Mar 29 2021, 10:20 AM
|
i7 Clan
|
QUOTE(x800 @ Mar 28 2021, 10:05 AM) I envy ppl who won the silicon lottery... Never won any silicon lottery in my life, all my past and current cpus are just average bin. Dont have the privilege of some countries where you can return/exchange a cpu because its not a good bin. Nonetheless I just work with what I have lol. Anyone have a spare renoir or micron rev E lying around? hands itchy already nothing more I can play around with on my 5600x No need to be jealous LOL. You just need to keep buying and binning. Btw those OC numbers above are just stable in Cinebench R20 benchmark, high chance to fail in more stressful tests such as Blender, BFV game etc. Despite being able to complete CB R20 at 4.6GHz all-core with 1.25v, my chip requires more than 1.325v to pass Blender tests and the temps has already reached close to 90C mark under load. I think I will just settle at 4.5-4.575GHz for 24/7. Why do you want a Renoir that's 20-25% slower than the Vermeer? For the sake of FCLK 2k+ synced fun? Not sure still worth it or not though, here's the 4650G @ RM 1019: https://shopee.com.my/AMD-RYZEN-5-4650G-3.7...9675.3281691915
|
|
|
|
x800
|
Mar 29 2021, 10:38 AM
|
|
QUOTE(nrw @ Mar 29 2021, 10:12 AM) I still have a 4650G over here. Just an average chip though. Thanks for the info, I'll keep this in mind QUOTE(owikh84 @ Mar 29 2021, 10:20 AM) No need to be jealous LOL. You just need to keep buying and binning. Btw those OC numbers above are just stable in Cinebench R20 benchmark, high chance to fail in more stressful tests such as Blender, BFV game etc. Despite being able to complete CB R20 at 4.6GHz all-core with 1.25v, my chip requires more than 1.325v to pass Blender tests and the temps has already reached close to 90C mark under load. I think I will just settle at 4.5-4.575GHz for 24/7. Why do you want a Renoir that's 20-25% slower than the Vermeer? For the sake of FCLK 2k+ synced fun? Not sure still worth it or not though, here's the 4650G @ RM 1019: https://shopee.com.my/AMD-RYZEN-5-4650G-3.7...9675.3281691915Just wanted to play around with the hardware, its as fun as playing games on the hardware (at least for me)..and I dont play games much these days anyway That said, I might as well wait for desktop cezanne, hopefully still monolithic die This post has been edited by x800: Mar 29 2021, 10:39 AM
|
|
|
|