any sifu nearby cheras ? can pay me a visit and fix this ram 😔 i willing to pay some fees on ur service. shoot me at 019-355 2626 John. i hope can get a really good sifu to explain and share with me.

Actually your current setting also good enough. 16-15-15 @3800Mhz is ok la. Sometimes its your luck also

i back to 3600mhz 14-15-14-28. 3800 i tried testmem5 v0.12 got many error 😔 i dun know wat error is that. so far 3600 0 error

3800Mhz, have you try put 1.5V on DRAM ?

yup 1.5. would like to ask is this ram the best b-die ? thinking to buy it. is this ok to use in ryzen system ?

This is confirm Samsung B die. But this one no RGB. Your rig so colourful. Might as well go buy G-Skill higher binned ones.
I have 2 sticks on these. However, if you run 4 sticks, dunno what will happen.



If I want AVX load stable, then i got the above timings at best. TRFC can probably go lower. I haven't have time to try.
If I want purely gaming load stable, I can drop my TRCD to 14.
However, I run my voltage abit higher than normal ppl.

This post has been edited by k!nex: Jun 21 2020, 11:34 PM

actually my neo which i bought is 16-16-16-36 1.35v. Isn’t it confirm b-die or i am wrong ? i actually turn off all lightning while i use. i haven’t install the icue becoz icue seems lower down benchmark score

16-16-16-36 is B die. If its a Hynix CJR or Micron Rev E, it will be 16-19-19 like that. And If you dont have a B die, your TRFC cannot do ~300 for sure at 3600Mhz

This post has been edited by k!nex: Jun 21 2020, 11:46 PM

Done testing 20 cycle 0 error. 1.45. sumthing weird was why memtest show 3500mhz ?





This post has been edited by crazyfatt: Jun 21 2020, 11:40 PM

Thts your CPU base clock isnt it?

https://hcidesign.com/memtest/download.html
For stability testing. Get the free version.

At the timings u run you 100% have B-Dies already. Don't waste money for 1% more performance.

The problem with ram testing is that to properly test 32GB each test run would take ~4h.
So getting someone to do for you is no option if you really wanna max stuff out.
Your 3600 setting is fine, too.

This post has been edited by nrw: Jun 21 2020, 11:55 PM

may i know how to use this for testing pls ?

oh ya 😔 i’m juz too stupid....and it shud be 16 cycle.....i’m re-run again

If I were you, I would aim for 3733MHz or 3800MHz. Ryzen CPU loves high fabric clock.

Anyone know what chips is used inside the latest G-Skill TridentZ Royal?
I'm thinking of buying the gold C18 version as per the link below

https://www.gskill.com/product/165/299/1552...35V16GB-(2x8GB)

95% certain is Samsung C die. Another 5% possible Hynix CJR. Because I have 1 set of Trident-Z RGB and 1 set of Trident-Z Neo 3600Mhz CL18-22-22-42 1.35V. Both of them also Samsung C die. Trident-Z Royal seems to have the same PCB as the other Trident-Z series except different heatsink and the lighting effects.

This post has been edited by k!nex: Jun 22 2020, 05:14 PM

Noted. Thank you bro

Whats the best that you manage to squeeze out from your samsung c die kits? Especially the trident z neo 3600 cl18.

I'll just answer that @red-queen as I had a c-die kit recently which I briefly tested.
At 3800 you're looking at 18-20-21-21 or 18-21-21-21
At 4000 you'd be looking at something like 20-23-23-39

They also scale negatively on higher voltages. Sweetspot is between 1.3 and 1.35V on those frequencies.

Which is why I suggested you in fact have C-Dies few days back when I saw your results.

bdie is fun but d high voltage always a concern to me. micron e is more my cup of tea albeit timing not as tight...