if you liked it, then go for it
it depends. the key idea of a foam mod is to fill up space with damping materials, so that it will give solid typing feel, and help getting rid of unwanted sound. the rest is about how to achieve this, while considering differences of your board, because there is always more than one way to achieve the same outcomes.

the space between a typical 1.5mm-thick top plate and pcb is 3.5mm. ideally, in such cases, the ideal plate foam is 3.5mm thick. 4mm foam can be used also, because you can compress it further to roughly 3.5mm before use. alternatively, you can use 3mm foam with single-sided adhesive (which is about 3.5mm).

what if your plate is 3mm or 4mm thick? you use 2mm or 1mm foam instead. the same applies to bottom case foam.

if you liked it, then go for it

oooooooooooo so i need 1 foam between bottom case to pcb and another foam between pcb and plate. correct?

It's up to you. You can do either one only, or both.

Most people do the first one because it is an easy mod. The second requires all switches to be removed so that you can get the plate off which can be quite a lot of work if the keyboard is already fully assembled.

ooooooooo u mean have the cut all the shapes and holes precisely, i never thought of that xD.

Currently, only like their arrow keys which doesn't have on my annepro 2 

I posted my experience on pages 107-109 of this thread.

ok; it's really up to you.
have those switch films arrived? would like to know your opinions on the mods

Oh you remembered I'm waiting for my switch films? I only ranted about it ten times in this thread. 

No they haven't arrived yet. I even ordered 2 sets from TX US after I saw on reddit that they had restocked. Clear some more which is what I wanted in the first place (and aliexpress didn't have).

USPS 7-21 business days. Come tikam which one arrive first.

Oh you remembered I'm waiting for my switch films? I only ranted about it ten times in this thread. 

No they haven't arrived yet. I even ordered 2 sets from TX US after I saw on reddit that they had restocked. Clear some more which is what I wanted in the first place (and aliexpress didn't have).

USPS 7-21 business days. Come tikam which one arrive first.

https://item.taobao.com/item.htm?spm=a230r....id=557927446660
http://www.coolermaster.com.cn/product_detail.aspx?id=289

Has anyone bought this keycap set?

Hi guys. I have Gat reds and Outemu Browns. Both are soldered. Which oil/grease is more optimal for non-desoldered method with brush? Krytox 205g0 or 105?  Thought of just getting one lube for both applications.

I'm not an entousiast just a casual mech user.

hi all mechanical keyboard lover, if vamirlo bring there brand in malaysia does you guys interested ?

honestly, malaysians just want something cheap

honestly, malaysians just want something cheap

ooooooooo u mean have the cut all the shapes and holes precisely, i never thought of that xD.

Foaming the bottom case is not always a walk in the park either. Since I'm still waiting for my...you know, I'm slowly doing my bottom case. Some of the squares have 2 layers of foam. So far in this picture there are 40 individual pieces of foam that I have cut to fit the spaces. Still have at least 10 pieces to go.

Those with flat and empty bottom cases....be grateful.

what board is that. I think for my board, i only have to cut 1 whole piece, then cut out holes for screws etc

edit: btw, do u use all the 4mm foam u bought? if remainder not using, can sell me

Foaming the bottom case is not always a walk in the park either. Since I'm still waiting for my...you know, I'm slowly doing my bottom case. Some of the squares have 2 layers of foam. So far in this picture there are 40 individual pieces of foam that I have cut to fit the spaces. Still have at least 10 pieces to go.

Those with flat and empty bottom cases....be grateful.