change to http://zcash.flypool.org/

1050,1050ti is useless. ETH can only score 9-11Mh/s, depending on manufacturer
RX560 can do 12Mh/s and modded can give u ~15Mh/s

do not waste your time and money on 1050s. If good, why its not SOLD OUT?

thanks man..will try to get 1080ti next week and start mining zcash..

Then please tell me which company is Legit?based on your logic, no company is legit.

This post has been edited by gigroup: Jul 2 2017, 09:17 AM

good.....🤗

This post has been edited by gigroup: Jul 2 2017, 09:21 AM

please recommend the best zcash mining wallet..

Jaxx.io.

So far so good. There could be some better one out there..

https://www.cryptocompare.com/wallets/#/overview

Still the same error, using nheqminer_0.3a_flypool, below is the command. Address should put zcash address or bitcoin address? I tried both but stil the same error.

nheqminer.exe -l asia1-zcash.flypool.org:3333 -u <Address>


log:
Setting log level to 2
[14:30:05][0x00003330] Using SSE2: YES
[14:30:05][0x00003330] Using AVX: YES
[14:30:05][0x00003330] Using AVX2: YES
[14:30:05][0x00003474] stratum | Starting miner
[14:30:05][0x00000c98] miner#0 | Starting thread #0 (CPU-XENONCAT-AVX2)
[14:30:05][0x00003ab8] miner#1 | Starting thread #1 (CPU-XENONCAT-AVX2)
[14:30:05][0x00002d08] miner#2 | Starting thread #2 (CPU-XENONCAT-AVX2)
[14:30:05][0x000012b8] miner#3 | Starting thread #3 (CPU-XENONCAT-AVX2)
[14:30:05][0x000027e0] miner#4 | Starting thread #4 (CPU-XENONCAT-AVX2)
[14:30:05][0x00002cac] miner#5 | Starting thread #5 (CPU-XENONCAT-AVX2)
[14:30:05][0x00003810] miner#6 | Starting thread #6 (CPU-XENONCAT-AVX2)
[14:30:05][0x00003474] stratum | Connecting to stratum server asia1-zcash.flypool.org:3333
[14:30:05][0x0000010c] miner#7 | Starting thread #7 (CPU-XENONCAT-AVX2)
[14:30:05][0x00003474] stratum | Connected!
[14:30:22][0x00003330] Speed [300 sec]: 0 I/s, 0 Sols/s
[14:30:24][0x00003474] stratum | read_until: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond
[14:30:24][0x00003474] stratum | Reconnecting in 3 seconds...
[14:30:27][0x00003474] stratum | Connecting to stratum server asia1-zcash.flypool.org:3333
[14:30:27][0x00003474] stratum | Connected!

Guys have question

ASIC machine (Antminer) VS Gpu mining
Which is more profitable and why people is not using Antminer machine instead of GPU mining?

why not use EWBF cuda miner?

also same error, keep disconnect... i really no idea what is wrong....

I suspect the network port required by miner software are blocked.
You done your mining at home ?

yes, at home.
I tried with windows firewall off, but still the same.
No problem on ETC, and ETH mining only zcash has problem....weird

u r right, the connection got blocked and the culprit is my Asus Router
Been trying for 3 days ...

Thank god you solved your issue
alhamdulillah

whats wrong with ur asus router?

But if you have 3 cards right, 1 card fail at least 2 cards still running.

Oh and about the figure, GTX 1060 6GB draws j ust about 100w, so it's actually around 300w only if you run 3 cards. Even less if you adjust the power target.

Not really. 1060 being at the lower price point would be much easier to sell off.

But people will still want. 1050 Ti lowest I got is 10Mh/s, highest reported 12Mh/s on stock with Zotac.

If I have Nvidia card I will go for ZCash, for the reasons you mentioned. LOL Mh/s not so good leh.

Because they work for different things?

Nowadays hot coins are Zcash and Ethereum, both are ASIC-resistant - how to use ASIC miner to mine?

For those who are interested, here's what I get with my Nvidia cards

Zotac GTX 1080 Mini	160W	390 Sols/s
Galax GTX 1070 Katana	100W	350 Sols/s
Zotac GTX 1060 AMP 6GB	100W	275 Sols/s
ASUS GTX 1050 Ti Expedition	55W	228 Sols/s

*reading based on the Excavator CLI when doing Zcash mining*
**I'm going by the lowest reading seen. My GTX 1070 card is running at 100W confirm sure