just a simple water cooling setup

PM him in the future, he's using Geocities to host his pictures and also limited bandwidth. Keep this thread clean from discussion or any irrelevant posts in which could be solve with just a PM.

Just another friendly reminder.
Cheers

Already posted a related pic over at the CZone thread. But will pimp the rig here too!



Rest of the pics - click link in sig...

This post has been edited by MacDaNife: Aug 31 2005, 01:29 PM

Finally got my Swiftech MCP650 installed yesterday. This baby moves some serious water eventhough I have nozzle #5 installed in my RBX. Sweet!!

Here's a pic of my transformed watercooled rig.



Will post more pics later..

Cheers..

This post has been edited by Par@dox: Oct 17 2004, 06:01 PM

Update on my watercooling thing. Still looking for a nice container for my home-made "koolance" hehe.

Changed the puny Alphacool reservoir to a home made one.




Fan grille and shroud are temporarily attached with cellophane tape. Will fix this later.




Added a 90 degree pipe fitting to ease the pressure on the pump.







Changed the CPU block to TDX.




Added a Maze4 GPU block.




The UV light shows up as blue for some reason... It's actually purple.




As it stands for now.



This post has been edited by shreaker: Nov 15 2004, 02:16 AM

New WC setup


Attached image(s)

Rad


Attached image(s)

Bigwater, water block. Not the most shiny, but it is pretty well and flat. Make you wonder y it doesn't look like the outer edges. Note partial reflections of mobile phone.
The discoloured haze is the AS5.



Attached thumbnail(s)

Installed block. On socket A. Just using clip so don't move it around it does shift



Attached thumbnail(s)

Radiator. The fin thinness is incredible. So be careful handling it. It will bend real easy.



Whole setup in my cramp case


Wow nice glow.



There is another Led in the pump/reservoir. Barely visible glow


The whole thing




Don't mind the picks kinda bad =]
Note to self BUY or borrow a real camera!

Edit: damn thumb nails still there. thanks shreaker for the pm tip

Enjoy.

This post has been edited by jujuzombie: Dec 10 2004, 05:30 PM

Whole View
http://img.photobucket.com/albums/v626/kuc...er/IMAG0029.jpg

Full Load
http://img.photobucket.com/albums/v626/kuc...er/IMAG0034.jpg

Interior
http://img.photobucket.com/albums/v626/kuc...er/IMAG0032.jpg

External Water System
http://img.photobucket.com/albums/v626/kuc...er/IMAG0040.jpg

I explain based on my water system

http://img.photobucket.com/albums/v626/kuc...er/IMAG0001.jpg


hmmm... bout the pricing... let me see.... the case for the water reservoir is around RM 30-40 ( because its acrylic.. but some can opt to use tupperwares or even brake fluid container.. ) ... the 12cm fan is about RM 28 at pasar road.. water pump is about rm 32 at pasar road... ( i'm sure a smaller pump will do that cost around rm 15) radiator is free cuz i took it from my car...( its the heater ) but if u want cheap radiators try go to any kedai potong kereta... i'm sure u can get nice ones for very cheap prices... after all who needs heater in malaysia ? the tubing is about RM 3 for 3 meters... and of coz... last but not least the water block... which cost around rm 150 at Overclockers Paradise... but i was in a hurry at that time .... didnt have time to look for other shops... but i think there are water blocks that are cheaper than that.... hmm i tried the net and i found one online store selling it for as low as 18 bucks that is about RM 60- RM 70.. I think overall it is about
Rm 230-RM240 including the acrylic reservoir...

my ancient wc setup



This post has been edited by nicotine: Oct 8 2005, 03:52 AM

AMD64 3200+@2.4ghz winchester 1.6Vcore
idle load 33C
full load 37C

This post has been edited by ray99mond: Feb 16 2005, 04:48 PM

still testing.. scared water will leak

OK here is mine...



On the top left hand is the OP's rad sandwiched with 2 x 80mm sunon fan (orginally are the enlight casing fans) .

Bottom left hand is the resevoir (OP's oso),
The bottom right hand is the nirox P2800 water pump (my op's pump kaput redi cause using this w/c set to cool off pelt).

and here mine..



my big water setup. Add CM 120mm fan inside case to make better airflow for radiator. Adding 1 more 120mm infron my case to make better airflow. Idle temp is 33~35C full load is 43~45C on normal room..no air con

here is mine...jus finish install!!!


Attached thumbnail(s)

this is mine

pentium 4 3.2ee 512 tccd samsung

39 ~ 50 full load


Attached thumbnail(s)

Here's my ThermalTake Rocket with the Aquarius II GPU waterblock

The CPU waterblock with Blue LED

*EDIT: Will put new photos soon

This post has been edited by rg470: Jul 13 2005, 10:33 PM