1. Price would be as close to cost
2. I can lease you if you can loan me an E60 beemer so sure

Get la, c how dirty it is buying 2 units frm En. Ong then V share 1/2 1/2 ,each for 1 of us.

I'd really interested to find out the improvement b4 n after the block installed.

This post has been edited by J1@l_ l_l l\l: Jun 23 2010, 09:16 PM

i got it already bro, waiting for my WC setup.
just wanna know how's d temp on the IOH ICH QPI and stuffs when using original heatsink .
who knows 4000 uncore possible

hmmm duno why u all cannot do 4000 uncore with stock NB heatsink.

probably high temp less capability ?
not sure woah, this is my first attempt on x58 platform .
u've been in it for at least a year now right .
y dont u entertain us with some info ^^,

Depends on batch of 930, uncore 4000Mhz needs VTT at least 1.4v
A sweet combo of vcore, VTT, vdimm, IOH will determine the stability of this frequency.
This VTT will affect PWM (system) temp, most mobos can handle up to 100C.
Throttling at temp approaching 90C during LinX can be solved by setting program process priority from Normal to "Above Normal"

solved ?
u mean it'll be lower temp on the pwm temps when set prime95 to above normal ?

oh btw, since im still new in this, mind xplaining what's d function of IOH and ICH ?
and vTT = QPI voltage right ?

not lowering the temp but to tell the cpu to load stronger
CPU VTT = QPI volt
IOH - This voltage aids when increasing base clocks above say 200.
ICH - This voltage feeds the chip that regulates the communication from the peripherals to the CPU via the DMI. It is best to set this at auto.

oh so its saying as if this IOH is something similar to PLL voltage ?

if i'm not mistaken, IOH is actually refers to your NB voltage..and ICH is SB voltage..

you need to increase your IOHv since your baseclock increases..NB is the part where the bclk linkage with with the memory clock(ram)..due to increase in bclk will increase the memory clocks, we need also to increase the IOHv..say 1.3-1.35v...this is where i put mine at 4.00

oh ok so IOH and ICH voltage i can imagine which to increase already .
so this uncore thing here, what does it connect to ?
which voltage is required to increase in order to gain more uncore frequency ?

VTT la bro

pulak .
i tot vTT is similar to QPI voltage ? >.<"
aih kene kaji some more laa like this >.<"

ekekeke.. first you have to know that like CPU clock speed, dram speed, and QPI frequency, uncore is a multiple of the base clk. Uncore can be set independently of those other frequencies, subject to certain stability limitations...

usually, the uncore freq must be at least 2:1 of the DRAM speed otherwise you will not get a stable overclock, in fact your PC will not even boot if the ratio is not suitable...

Increasing the uncore:dram ratio above 2:1 yields significant performance gains. try not to get the uncore freq subject to 3:1, you will not a stable oc..

---

Added on June 24, 2010, 12:50 amone more thing, try to update to bios bro..they correct some kind of stability issues already..i have updated mine 0602, so far, np..

This post has been edited by kaka_89: Jun 24 2010, 12:50 AM

yeah i know them by much but i just wanna know what's d relation of this thing to this thing .
something like that laa .
cause im still unclear about QPI and uncore .
what's d function of uncore and does QPI increase WRT bclk ?

OC settings better don't discuss here
Read more HERE
/ kacau

ahaha ok abang !
sorry2 .
off topic a bit .
anyway, i'll read more la since i got my setup coming soon .

Apahai WC club becomes OC club plak?

hahaha dunno .
ok we should get back to WC stuffs in here ^^,

Aik, where were V huh

Oh ya, talking bout the static pressure, for 120mm, any suggestion for high static fan with noise level not more than 40dBA and generates more than 100cfm? M I too selective

TribeWerk seems kindda pricey, don't U guys think?