Thanx bro.Can i put the raddy at the side panel? I've cut a holes there.

Mmm...i dont think so...better put it on the top..but it's your choice...not mine..lolz..

yo bro, i noticed something wrong with ur loop

it should go as reservoir pump block/rad reservoir

from ur setup,

it is pump reservoir chipset block and cpu block

ur reservoir lower barbs should be act as outlet while upper barb should act as inlet, from the pics definately there are problems, and also ur pump inlets are on the top ? if yes just reverse the tubings on the reservoir, else i think u should rearrange ur loop....

That's what i thought.something wrong.My pump is suffering when i tried it last nite.

All right,i already change the reservoir inlet n outlet.
Reservoir - Top part inlet,bottom outlet
Pump - Top outlet,bottom inlet.

Thank you bro.

tubes ah?
i got used ones la.
dunno whether you want,
but masterkleer are the best ive used by far

masterkleer 7/16ID tubings rocks... but its PITA to fix it onto D5 pump..

Want to sell it dude?
Its very hard to get it.Like hot chicks.

Mastekleer is the one i am looking for.

What do you mean PITA?
Well,does it fits tightly or need a clamp?

Do you guys know which barbs can fit Nirox P2800?

i got a shitload of tubes, masterkleer, tygon r3603, cap ayam


edit: i used to have tygon silver, but my dad take and used it for the toilet wtf

This post has been edited by bryanyeo87: Aug 30 2008, 12:13 AM

haha...then why dont use the oranges toilet tubing for the watercooling...lolz..

i have silver tygons

Out of those,which one is great performance and reasonable price?



Is it good or equal to mastekleer?

depends la
i can bend my tygons more.
masterkleer is nice if you have colored coolants i guess

Tygon only if you are rich.Masterkleer will do the job fine and a lot less costly

actually to be honest, i think ghetto tubes are good enough.
ACE sells cheap ones and they're good enough.
doubt the extra special properties of the tubes will help that much ><

my rm3 per ft tubing still in perfect condition even already 3month ++ usage.still doesnt kink.

thanks god

yeahh! now my custom wc aready complete....
hope will have budget soon to get new CM casing....

new result:
CPU idle: 48
GPU idle: 39

previous result
CPU idle: 55---using CM Aquagate
GPU idle: 52---using stock cooler
CPU load: 58-60
GPU load: 65-72

My PC
Win vista Ultimate 64
AMD Phenom 9550 X4 + D-tek Fuzion v2
MSI 9600GT OC + XSPC Razor 9600

soon will test temperature during high load...









previous wc



This post has been edited by truzoids: Aug 31 2008, 01:57 AM

yo bro, u shouldnt connect different block in parallel.... this will decrease ur block performance by splitting the flow between them...

using the series conection instead of parallel i think not very gud.. coz the temperature of coolant when flow 2nd block already increase..unless i put 1 rad between it....

to be honest, for parrallel setup, its is advised to have same flow rate of both block, else ur block are cooling inefficiently...

having them in series the difference will be very small, we are talking about 0.x C, no matter how u arrange ur loop, as long as the reservoir is b4 ur pump, the temp will only have very slight different, like i said b4 0.x C.

for example:
water tends to flow to the less restrictive block, just like our electronics circuit current, when u put different restrictive and flowrate block in parrallel, the flow will split inbalancely, making the least restrictive block getting more flow than the more restrictive one, this will make the block inefficient.

the main purpose for parrallel setup is to use same identical block / rad to make the loop least restrictive and get higher flowrate. For example, 2 mcw-60 will make both block getting the same flowrate, hence making the overall flowrate much more better, but in the other way round, putting different block will make situation worst as one block will cooling inefficiently, reduced the potential cooling capabilities of tht particular block.

2nd example:
having parrallel identical radiator will also make ur cooling more efficient as both radiator cooling at same efficiency and having better overall flowrate...

This post has been edited by lichyetan: Aug 31 2008, 07:01 PM

eh bro, i think youre loop is suffering a serious pressure drop.
your pump shouldnt be pumping into the GPU and CPU at once.
it should be into cpu and then into gpu.
like that its very uneven and defeats the purpose of getting a etup like that leh