i had install ODM v2.2.250 pc version

how to search ,add onvif camera ya ?

thanks ..

Once you login it will auto detect all the available Onvif ipc in the same IP segment.


Attached thumbnail(s)

odm not detect the onvif Cam....

i use isee pc version ,vms lite..it can detect the Cam but say off line ,,
while i use isee phone version can connect the Cam and control the Cam,see live ..
isee app cannot find any option for onvif function ...

did factory reset ..still same ....

thanks ..

Maybe that camera does not support Onvif. Can you key in the camera ip & open with PC browser? See if got additional settings?

Any recommendation for cctv for number plates for night ? I am using tapo c425. It very clear at night and can see car number plate that are stationary. But moment car ehdlights are on and its moving. Its all blown out and cant see the plates of the moving car

i did add the Cam to hik dvr b4..
but recently change to maxis router ..
i forgotten how to set up again ...sad..

thanks ...

Need camera that can set the exposure time manually or buy more expensive type purposely for LPR. Check if the tapo c425 have manual exposure settings or not?

Oh dont have that option for manual control for tapo c425 Okay okay, i guess i shall keep trying for the sake of safety.

Need camera with large low light sensor, low aperture, high frame rate

Can refer this article: HIKVISION DARKFIGHTER 2.0

hi, I am currently renovating my house and plans to lay ethernet cable.

since I am staying in an apartment, I plan to install ONE cctv only (at the main door) in my house.

can anyone suggest a model/brand/camera format/etc. or whatever keyword that I can search to learn more.

I have a NAS, if possible don't want to get a separate NVR/DVR just to cater to this ONE cctv only.

thank you

You need to search for POE (Power-over-Ethernet) cameras if you want to go for a wired solution nowadays. You can connect the camera either to a POE switch or POE injector. Non-POE wired ethernet CCTVs still exist, but since you're laying down ethernet might as well do POE.

If you want to record directly to a NAS, your camera will need to support FTP.

Personally I use and recommend Reolink. They have good documentation on all these stuff and all of their advance features including AI stuff are free with no subscriptions required. I record directly to the onboard microSD as well as to my computer that's basically an NVR server. For my main door I use the RLC-843A which has IK10 vandal protection, 2-way audio and has 5x optical zoom, but you can opt for the cheaper RLC-842A if you don't need 2-way audio. There is an even cheaper RLC-840A/P337 model without the zoom but it's only sold in Singapore and not Malaysia.

Also, only use Endurance microSD. I personally recommend Samsung, although they are expensive they are actually the cheapest in terms of rated lifetime by cost. Because they are insanely long lasting, much much longer than any other competitor on the market.

This post has been edited by holynoob: Nov 5 2024, 09:02 AM

what is the recommended storage size if want to record for 7/24 for one week? 4pcs of 5MP wired CCTV

Need to know the camera Frame Rate (fps) and Bitrate (kbps) only can calculate for u.

Example:
5MP(2560x1920) 15fps 2304kbps H265 x4 = 2TB can record 19days 24hrs

Hi guys, anyone can recommend me a good and reasonable price cctv/alarm installer?

Should try b&w

Below is the spec. Can you help to check what is the storage needed? NTW, 3K=5MP right?
https://assets.hikvision.com/prd/public/all...et_20240327.pdf

Hi, DS-2CE16K0T-LFS is an Analog 5MP Camera, not 4K, it is 3K camera.

4K is 8MP.

For Analog System, frame rate and bitrate are set by DVR.
If u use HUHI series DVR, then u can have higher Resolution and Frame Rate, compare to HQHI series.

HUHI Can fully support the camera 3K Resolution, 2960×1665
3K @ 12fps 2188kbps H265 x4 = 2TB can record around 21days.

HQHI: Can only support partial resolution of the 3K Camera, HIK call it as 5MP/3K Lite, 1280x1936
Resolution lower even u use same model camera.

Thanks for the detail explanation. So if i have 4 camera, it can record around 5 days only. Is the calculation correct?
I see DVR has many variant although both are HUHI, eg: iDS-7204HUHI-M1/E & iDS-7204HUHI-M1/S. How to choose?

Do you support installation of CCTV at Melaka area?

4x 3K cam 2TB HDD can store around 21days.
7204HUHI-M1E got no Coax Output
7204HUHI-M1S got Coax Output
But nowadays nobody use Coax output anymore. So go with E will do.

or go for iDS-7204HUHI-M1X, this is the latest version, better Ai Perimeter Detection compare to E and S

Tapo c500 is rated IP65 Weatherproof. Is it ok to fix it upside down like this at outdoor?