How to decide the type of CCTV you need?, Security System - CCTV
|
|
 Jan 17 2018, 01:13 PM
Return to original view | Post
#1
|
 
Senior Member
3,351 posts Joined: Dec 2006  
|
QUOTE(soonwai @ Jan 17 2018, 08:55 AM) Anyone can recommend a good place to get an 8 channel DVR? Just plain old analog cameras. Need to replace my one. Spoil already. Your spoilt unit using IDE or Sata? |
|
|
|
|
|
Apr 17 2018, 09:17 AM
Return to original view | Post
#2
|
|
Senior Member
3,351 posts Joined: Dec 2006
|
QUOTE(psyduck89 @ Apr 17 2018, 12:02 AM) Just use DC 12V adapter, POE camera can also be power individually or use this passive DC injector. Much cheaper but only 30-60m depending on how many Amp is your 12V DC adapter and type of RJ45 used.Passive injector |
|
|
Apr 20 2018, 07:49 PM
Return to original view | IPv6 | Post
#3
|
|
Senior Member
3,351 posts Joined: Dec 2006
|
QUOTE(chichichi @ Apr 20 2018, 09:22 AM) Dear all, please gave a look at the quotation below, what do you think? On the high side. Item 5, relocate CCTV points?Absolutely no idea about security system. In addition to the quotation below, do I have to engage companies like ADT for alarm? Thanks in advance for your kind suggestion.. |
|
|
Aug 29 2018, 12:45 PM
Return to original view | Post
#4
|
|
Senior Member
3,351 posts Joined: Dec 2006
|
QUOTE(th3game @ Aug 24 2018, 09:13 PM) ok will try tomorrow to check the power at camera end and will try to add Hikvision balun. So how did it go?will report back if successful or not.. |
|
|
Aug 29 2018, 12:48 PM
Return to original view | Post
#5
|
|
Senior Member
3,351 posts Joined: Dec 2006
|
QUOTE(idealhometech @ Aug 29 2018, 12:24 AM) Hide it.. Yes, just got another WA picture whereby the HDD was removed by the thieves from a restaurant. Also, try to upload to cloud even if it's just pictures. Better than nothing. |
|
|
Apr 21 2019, 05:37 PM
Return to original view | Post
#6
|
|
Senior Member
3,351 posts Joined: Dec 2006
|
QUOTE(naqib0307 @ Apr 21 2019, 04:52 PM) Only installed 3/8 cam. The rest waiting for wiring complete and after interior paint/ plaster ceiling for living done. So you choose 2 or 4Mp?[attachmentid=10230417] [attachmentid=10230418] [attachmentid=10230419] |
|
|
|
|
|
Apr 22 2019, 09:28 AM
Return to original view | Post
#7
|
|
Senior Member
3,351 posts Joined: Dec 2006
|
QUOTE(vignesh77 @ Apr 21 2019, 09:54 PM) All, another noob question. If i buy 16 port POE Gigabit switch, can i use 5 ports as wall plate for lan connection and balance for powering POE cameras without the need of NVR? Yes. Another Q, if i decide to use NvR without the cat5e ports, the connection will be like Router > POE switch > NVR and the cameras will be connected to the switch? |
|
|
Apr 22 2019, 10:45 AM
Return to original view | Post
#8
|
|
Senior Member
3,351 posts Joined: Dec 2006
|
QUOTE(naqib0307 @ Apr 21 2019, 05:56 PM) 4MP. Got video comparisons to share? 2 & 4Mp.2MP dome x 2pcs cause that is the only stock they have for dome |
|
|
Apr 22 2019, 05:18 PM
Return to original view | Post
#9
|
|
Senior Member
3,351 posts Joined: Dec 2006
|
QUOTE(naqib0307 @ Apr 22 2019, 11:46 AM) I have not installed the 2MP camera yet. All using main stream?Here some photos day and night for 4MP camera taken using phone application [attachmentid=10230921] [attachmentid=10230922] [attachmentid=10230923] [attachmentid=10230925] |
|
|
Apr 23 2019, 12:18 AM
Return to original view | Post
#10
|
|
Senior Member
3,351 posts Joined: Dec 2006
|
QUOTE(mv_wong @ Apr 22 2019, 11:13 PM) The last picture, is the lighting provided by your house lights? or that's the totally dark scene but the camera night mode are able to take this picture without much light source? You can see the camera IR reflected on the back wall & on the left could be his neighbour's back lights or street lamp. I don't know if this HIK model can be configure as 5MP or is strictly 4MP. If 4MP it is not using Sony CMOS so you will notice a bit of noise during low lights. |
|
|
Apr 23 2019, 10:33 AM
Return to original view | Post
#11
|
|
Senior Member
3,351 posts Joined: Dec 2006
|
QUOTE(vignesh77 @ Apr 23 2019, 09:25 AM) Was reading the other day some UK based site. It seems they prefer 2mp compared to 4mp due to lower noise rate & better sharpness. And also eats up lesser hdd space. Actually 4Mp sucks. It normally use OV4689 sensor size 1/3 & looses out to Sony CMOS during low light.Can't locate the website again. Anyone has experience using both 2mp & 4mp? Please share your thoughts. This post has been edited by adamw: Apr 23 2019, 10:51 AM |
|
|
Apr 23 2019, 06:33 PM
Return to original view | Post
#12
|
|
Senior Member
3,351 posts Joined: Dec 2006
|
QUOTE(lleihuan @ Apr 23 2019, 03:00 PM) I have a few Wyze Cam V2 and it is wireless. I think he mean the power cable. |
|
|
May 9 2019, 08:44 PM
Return to original view | Post
#13
|
|
Senior Member
3,351 posts Joined: Dec 2006
|
QUOTE(naqib0307 @ May 3 2019, 11:34 PM) My solo project tomorrow 😂😂. Hopefully everything goes well. I wonder how the 5Mp quality compare to your 4Mp. Will test it out when free.Bought the nvr from idealhometech. Quick response. I like dealing with this kind of people. [attachmentid=10238432] Attached thumbnail(s) 
|
|
|
|
|
|
May 9 2019, 10:43 PM
Return to original view | Post
#14
|
|
Senior Member
3,351 posts Joined: Dec 2006
|
QUOTE(naqib0307 @ May 9 2019, 09:49 PM) Damn. If they have the 5MP sure i'd get it. I thought u told me before it was analog? Hahaha I mean I tested was 5Mp HIK analog. |
|
|
May 10 2019, 12:01 PM
Return to original view | Post
#15
|
|
Senior Member
3,351 posts Joined: Dec 2006
|
QUOTE(frostier @ May 10 2019, 09:31 AM) 5MP is Analog Hey bro, are you sure you are from HIK? No 5Mp IPC? Sent my regards to Sally IP cam comes in 2, 4 and 8MP The advantage for IP cam is the VCA itself  |
|
|
May 10 2019, 06:25 PM
Return to original view | Post
#16
|
|
Senior Member
3,351 posts Joined: Dec 2006
|
QUOTE(OhNooy @ May 10 2019, 02:17 PM) Hi guys, The only cons that I can think of for IP Camera is the pricing. So if you can afford the little bit extra, IP is the way to go. With POE so much neater no need separate cabling for power.I'm surveying for CCTV, I saw plenty of comparison on Google for Analog vs. IP, both got pros and cons. What is still the suggested method? Thanks! This post has been edited by adamw: May 10 2019, 06:38 PM |
|
|
May 11 2019, 01:56 AM
Return to original view | Post
#17
|
|
Senior Member
3,351 posts Joined: Dec 2006
|
QUOTE(naqib0307 @ May 10 2019, 08:28 PM) The cost for pulling cables and add new power point for my cctv setup is about RM3k. Not sure about analog cctv wiring. I thought you are using POE? New power point for what? And you are lucky didn't go for 5Mp, it sucks. But too tired to compare the 4Mp side by side. |
|
|
May 11 2019, 09:36 AM
Return to original view | Post
#18
|
|
Senior Member
3,351 posts Joined: Dec 2006
|
QUOTE(naqib0307 @ May 11 2019, 08:07 AM) Power point for my switches, nvr and others. I put the rack @ a quite high position BTW, I realised I tested the 4Mp instead of 5  |
|
|
May 11 2019, 08:18 PM
Return to original view | Post
#19
|
|
Senior Member
3,351 posts Joined: Dec 2006
|
QUOTE(Nando's @ May 11 2019, 02:54 PM) Bro, you're selling? Saxco dealer's price. |
|
|
May 12 2019, 10:06 AM
Return to original view | Post
#20
|
|
Senior Member
3,351 posts Joined: Dec 2006
|
QUOTE(OhNooy @ May 11 2019, 11:15 PM) My budget hopefully around 2k without wiring coz wiring will be done by wireman during reno, conceal under plaster ceiling. Analog will still be around, now they already have 4K but if pixel to pixel for comparison IP still is a little better but will have a bit of latency depending on how you connect them to your NVR.I worry analog will be phasing out in few years, and need multiple cables for 1 cam. How many cameras? |
| Change to: |  0.0781sec
 0.33
 8 queries
 GZIP Disabled
Time is now: 25th November 2025 - 07:16 AM |
Quote