nanobeam or litebeam for ptp is good enough. nanostation m is kinda quite old.. so i guess can opted for nanobeam or litebeam

Hi can you propose which item to be used ? Present premises is 3,000 sft single floor condominium. Difficult to get wifi coverage all over the unit. Worse when we close the bedroom doors. Thanks.

If you got the money to spend, the setup below will work really well. You will need Ethernet drops to connect the AP anyways.
3x UAP-AC-PRO, US-8-60W and USG hooked up to your existing ISP modem.

For a lower budget solution, just get an Asus router and run powerline wireless extender.

Thanks for the feedback. Want to rule out the option of pulling lan cables. Also powerline doesnt really work as unit as unit running 3 phase electricity. Any alternatives ?

FYI - expect that the UBNT Unifi range will become increasingly difficult to get in mainstream settings in the coming months. TM has successfully won a court case against a/the UBNT distributor barring them from selling products with the name Unifi in them as while it's a US trademarked product, Unifi is trademarked in Malaysia and may cause "confusion" as while one is a service and one is a product, they both are IT/networking/etc related.

true.... and longer waiting duration to get certain UniFi range. however, airMax, EdgeMax, airFiber is not affected.

This is quite hard. If Mesh Unit front the door and another Mesh unit inside the room how?

Wow, the situation really became worse, last year, TM took down the UBNT Unifi app(for connecting to controller and managing AP) from the Play store because collide with their own app. If you want to download the app, there's a thread on the UBNT forums about it,

https://community.ubnt.com/t5/UniFi-Wireles...ry/td-p/2114998

Haih.. like this also can.. is there any way to get around this?

Ya. That's why asking for help here.

i'm thinking UAP AC Mesh will may do help.

Is this something like a wifi repeater / extender ?

Currently router is place at area mark X in red. No signal / very weak signals in all the bedrooms when the doors are closed.

Please refer to bottom link. It does work like repeater and extender. The only different is, these AP is centralized controlled. So it just one time configuration and easy compare when manage individual AP

what router you use? and what kind of wall the house have? looks a bit spacey house

UAP AC Mesh Explain

This post has been edited by pandera999: Jul 13 2018, 02:08 PM

will the new nanoHD be a good choice for gigaspeed connection compared to the LR or Pro

probably the best bet, but you cant really get nanohd in malaysia atm right?

got my ERX couple of days ago and set it up, seems pretty straightforward, already massive improvement to my network, but looking to replace my archer c7 and c1200 with either 2x UAP AC or 2x nanoHD if they become available...

yes. its 4x4 on 5Ghz network.. it is good. but for 2.4Ghz.. it just 2x2. but these days... most mobile phone can support 5Ghz... so not an issue.. good for high dense connectivity that demand 5ghz connection.

price wise have. yes... but the unit itself, i haven seen it yet. only UAP AC HD

Nowadays you literally buy anything that is not available here right. Tried G3 flex now looking at the nanoHD am waiting for telco gigaspeed announcement.

i think UAP AC LR will do..

Sorry. Stupid quiesrion. How does this device connects to my existing WiFi ? Do we use the app to select existing ssid than key in the password .

Now using d-link router provided by time.

It’s a condominium around 3,000 sft. Last time when I do renovation the contractor got hard time drilling holes as he say the walls are dense. So I suspect this is reason why diff to get good signal.

So u think this device able to provide the signal ?

How about the uap ac pro ? Can I plug it to the existing time d-link router and it would solve the problem ?

This post has been edited by a16791: Jul 13 2018, 08:44 PM

No, it do not solve your problem. ubnt mesh only works with ubnt products. and ubnt product is not the same as consumer AP. where you just simply combine with other brand and its hardware

i finish setup ubnt solution for my friend at KL apartment. he is using time+iptv, performance much better.
using USG + US-8-150W + 4 UAP AC LR + cloud key

solve his issue...