hi u know anywhere in malaysia i can buy the ubiquiti amplifi HD

Hi... i set up two uap ac lr in my office.. the 2nd unit is using the first unit wifi as uplink. What mode is this?is it in repeater mode which would cut the speed in half?or is it something like a mesh setup?

This is my home office setup:

ISP --> ISP Modem --> EdgeRouter X ---> UAP-AC-PRO
Yes I know it's messy:

selling my uap ac lite for RM350, anybody want?

reason is ive decided im a mikrotik person than ubnt.

not sure if anybody would appreciate it for what it is over there.

Has anybody managed to get IPv6 working on an EdgeRouter Lite?

For WAN, do I have to specify eth0 or eth0.500? I can't seem to get IPv6 up with this guide.

EDIT: I'm running v1.9.7+hotfix.3

It seems like during the Basic Setup wizard there's an option to enable DHCPv6-PD. Enabling that still doesn't give me an IPv6 address but I noticed there's some rules being set in interfaces/ethernet/eth0/vif/500/pppoe/0/dhcpv6-pd/

As far as I'm aware, TM supports IPv6. My ASUS RT-N14UHP could acquire IPv6.

It's Maxis fiber actually, running vdsl, a bit tempted to change to Time fiber, whereby it's fiber to home.

Hi all,

We've prepared firmware 3.9.3.7537. Please see below for the changelog and links to the firmware binaries.

Firmware changes from 3.9.2:
[ACIWPro] Enable DFS support.
[UAP] Add more security details to scan info.
[UAP] Security patch for the WPA2 vulnerability called KRACK (details HERE).*
[UAP] Various backend fixes and/or improvements.
[USXG] Fix fastpath tools.
[HW] Improve error codes returned on firmware upgrade fail.
*This primarily affects devices that support STA mode. It's worth noting that 1st gen AC devices do not support STA mode, which is why we have only released a 3.9.x firmware.

Download:
UAP-AC-Lite/LR/Pro/EDU/M/M-PRO/IW/IW-Pro | 3.9.3.7537 | md5
UAP-AC-HD/SHD | 3.9.3.7537 | md5
UAP, UAP-LR, UAP-OD, UAP-OD5 | 3.9.3.7537 | md5
UAP-v2, UAP-LR-v2 | 3.9.3.7537 | md5
UAP-IW | 3.9.3.7537 | md5
UAP-Pro | 3.9.3.7537 | md5
UAP-OD+ | 3.9.3.7537 | md5
USW | 3.9.3.7537 | md5
US-L2-POE | 3.9.3.7537 | md5
US-16-XG | 3.9.3.7537 | md5
Links are all HTTPS. This assumes your device(s) are currently running at least 3.7.51, and that the device's date is properly set (i.e. it can reach a NTP server). If you encounter issues with the upgrade, or your device isn't on a minimum supported firmware, then you can change the link to HTTP before performing the upgrade.

i have a noob question.

Could i use Switch-8 60W as a router replacement or i must use USG Gateway / EdgeRouter to connect to UAP?

USG better than ErLite-3 ?

Does it support maxis fibre?

OK. I will go for USG then. You have idea how to configure static ip for pppoe?

Mine is fixed ip

maxis fibre

Morning all. Anyone know how much AC-PRO selling here? thanks

Hi all

I just found out about this product as im trying to find a new router to replace my old one

I have a bit question and ill be thankful if you guys answer my question

1.can uap ac product replace my old router or do i need to connect uap ac product to the router first.can i connect it like this
Isp>modem>uap ac

2.regarding edgerouter, do i need to buy it or it just additional for better traffic

3.it is easy for me (newbie in this area) to setup the uap ac product

Im just using this product (if i buy) for home only and i found this product recommended by reddit

Thank you in advance

Thanks for the clarification

Do i use the TM provided router or i need a better router for better speed?

What i understand that is the uap ac just transmit the signal coming from the router itself. Correct me if im wrong, the installation like this

Isp>modem>router>uap ac

Does that mean that i do not have to use the router. My setup right now

Isp fiber box>huawei modem(provide by tm)>innatech router(provide by tm)

If i use uap ac,will my setup look like this?

Isp fiber box>modem>uap ac

Or

Isp fiber box> modem>router>uap ac

So far im interest in uap ac lr for coverage it cover. Do i need a better router/modem or i can just use it as it is?