I pump 31 or 32 psi (210-220kpa) depends on where i will go.

The recommended pressure chart sticker is at the b column, when you open driver door.

Winter

Thanks for your information.
Sometimes I saw behind there is 30SA..

SA stands for.....?

SA??? hope you mean SAE (Society of Automotive Engineers).... https://www.popularmechanics.com/cars/how-to/a53/1266801/

read this simple one..

Guys, just got my alza.
Just to check, the door will not auto lock after pressing brake?

No.

Guys, need your help to rectify the issue with my alza. Today, when i switch on my aircond, there seems to be a strange sound coming out of it.when driving, the car shaking a bit, but turn off the aircond, everything is ok.. I know there is a problem, but i dont know what cause it. Help me.. Thanks

This post has been edited by grimjow: Jul 21 2018, 08:39 PM

I have the same problem. This is what i learn from Perodua Service Centre. Apparently the sound you hear when you turn on AC is coming out from the compressor follow magnetic clutch compressor every 1-2 mins and the constant fan sound coming from the cabin blower motor.

To solve the "kicking" sound when you turn on AC is to change the compressor (and other components), likewise to the blower. If your alza is still under warranty, you can try getting a replacement from perodua service centre. But I heard even with new replacements from perodua, the problem still comes back over time.

For me, I chose to ignore it. Really can't expect from the cheapest MPV. Too costly to "overhaul" the entire air-conditioning.

However, after installing UR front strut bar (where it reduces vibration) and perform chemical cleaning on the condenser, the sounds significantly reduced.

Hope that helps.

This post has been edited by darrencjs: Jul 22 2018, 03:32 AM

Default Alza doesn't come with auto-lock. However, you can manually install it from a modification specialist workshop.

Will it void warranty ?

anything that involve cutting wire will void warranty, if it is plug and pla, is ok. just unplug it when you send back to sc for warranty claims.

Noted. Thanks.

Dear all,

Which brand/type of brake pad you guys recommended? Alza 2012 model here.

Just go for mintye. Its cheap, dust free, quiet, and durable.

Anyone using led bulb?

I just do alignment for my alza but the tyres still misaligned and the foreman suggest it is faulty lower arm plus I think absorber already gone kiok because even small bumps feel too hard on the car. So i want to ask whether I should replace only front absorber or all four? And for alang2 nak tukar which parts should be replace along with the lower arm?

mintye oem for ori p2 alza brake pad

get 2nd opinion i.e another tyre shop. Tyreman should know wether lower arm / absorber ok or not, cannot merely suggest


Can change front absorber only

Check the lower arm visually for bend or crack on bushing. If everything seems normal no need replacement. Local rubber parts are very durable which it hardly harden.

I would say you should replace the absorber mounting as well when replacing front shock unless your car is still new like 5 years or less. Anyway, replacing a new absorber will give you softer feel for few months only. Afterwards it will feel hard at bump again. For rear no need replace if it bounce normally.

Thanks guys. The car is old. I dont know whether the previous owner had ever change the absorbers.