i think so...so far john will tell if the item is clone or ori...he also got both the clone and ori for the Griffin...

Not worth it. They stopped updating the firmware for IPV3 Li. Go for RX200 instead at cheaper price.

tin box is better build.

brown box many problem

Hi thanks for replying but I saw on some forum say that rx200have some bad wiring and it need 3 battery tat mean I will need more budget for battery n charger n it abit annoying when put it in pocket because of it size PS: I don't really know it size but everyone were saying it was big so I assume it xD
But I found almost no problem on internet about ipv 3 li and I am just normal vaper so I don't really need those update for ni or ti those thing I will just stick with my kanthal XD and it is really so important for firmware upgrade?
I was still thinking to buy ipv li or others
Any suggestions it would be helpful
PS: if anyone interested in eleaf 100w or wismec presa 40w can pm psps: if u know to fix mod I will sell my loosed usb smok m80 plus too and a subtank mini without a rba (I broke the skru ) onli cod in nilai inti because I have no transport

This post has been edited by jk46831: Apr 22 2016, 12:10 AM

That's up to you. There is also Joyetech Cuboid and Smok R200 if you want smaller size.

FYI, IPV3 Li is taller and longer than RX200. RX200 is fatter than IPV3 Li though.

This post has been edited by TristanX: Apr 22 2016, 12:31 AM

then go for smaller device...rx200 good for battery life...im having one right now and im loving it
u can go for cuboid,good battery life + small size and incase you would want to play with tc mode in future

This post has been edited by 94brian: Apr 22 2016, 12:44 AM

Are you looking for 2 batt mod specifically? RX200 is great, no doubt but I don't really recommend it other then for the battery life. For a pocket friendly mod, I'd have to go with D2 and D3, but it's a single batt mod, or IPV4s and the new IPV5. Cuboid weighs almost the same as RX200 so that's a no. Extra features are nice but optional.

IPV3 li is considered outdated in the market. IP4s is the newer, "improved" ver of IPV4 and IPV3 li.

Have been reading about SS coils lately and can only really find benefits over kanthal. Is there a reason why Kanthal is more widely used?

Cheaper, flexible, durable and comes in abundance. Same reason why mech mods is still popular.

Kanthal wasn't made for vaping rather they found it can be used for vaping so of course there's a catch somewhere. SS just got popular recently but Kanthal was already tested. There's still some concerns over SS coils at the moment so you'd understand if people aren't willing to change.

Hi thanks for all the reply
I interested in ipv li because I can't find any problems on Google beside the temp thing (I don't use temp control)
I am quite interested in rx200 too but when I search on Google wismec rx 200 problem than I am worried and it fat so I just assume it will look weird when u put it in pocket
How about koopor 200w? (But also found quite many problems on internet xD)
I am looking for a wattage more than 100w with minimum problem and cheap xD
PS I have a eleaf 100w but it resistance is .15 so I'm gonna sell it xD
Anyway really appreciate all replied me

This post has been edited by jk46831: Apr 22 2016, 01:35 AM

yeah the people here are a helpful bunch. Must've missed your first post, else I'd say go for it. Ipv3li might be "old" but it's a decent peice of hardware. But try searching for PakTam vapor movement in FB first since they usually offer the lowest price, or VaporHub also on FB. Me, I did had my eye on IPV4s a while back. Same with IPV5 but RX200 was more suited for me.

Not quite a fan of the boxy form factor tho but take a look at Sigelei 150w and Sigelei Fuchai as well. No harm in looking around, right? Build quality, Sigelei is one of the most durable, better quality mod even compared to IPVs.

I feel like buying rx200 now
But I saw the video about a dead rx 200 n few people have the same problem
It's quite hard to find sigelei product around me
Do u guy know where can I sell my old mod?
Can I make my juice with only pg/vg and flavorings onli?xD
Had anyone tried sim bakery company?

am gonna let go some of my vape stuffs coz too many now

1st off is rx200 fullset + 3pcs lghg2 ori batt... mod got some scratch on top

2nd is vengeance tank from council of vapor (this is new unit, which come as a kit with mini volt.. mini volt not for sale tho)

anyone interested can PM me directly

Hyper Vape selling IPV3 Li at RM150.
https://www.facebook.com/vapehyper?_rdr=p

I suggest calling them to check for stock before going there.

im using rx200 now...no problem with mine...i guess the latest firmware had fixed all the issue...
however,the only problem i had is,the 3rd battery slot that nearest to the back cover 1,when want to remove if not careful enough it will cause brown big spark. its also my battery cover is loosen just alittle bit.
wont be a problem if i just carefully push the battery backward and remove it or just remove the negative side 1st...
some other cons are...1st batch back cover loosen you can see some gap,not a big deal. while the latest batch (red black version) they fixed the gap however it become too tight now,very hard to remove back cover,what i did just stretch outward gently the positive from negative battery slot,problem solved...
at 1st it feel very heavy but after used to it it just feel alright not gonna lie,its gonna feel awkward fitting into your pocket,but im carry a bag so that's not gonna be a issue for me

Haha I think I will go see the real product first see if it fit nice in my pocket and not look like a penxs xD
If I buy rx 200 I will try to find the red black because of the sexiness xD

take your time man...find which 1 u like the most
my rx200 battery can last 1 day and a half,moderate vaping...
mine red black version,finish is great...firmware 3.0 pre-installed so no need to update for awhile for now...
if not mistaken,it doesnt have lock function(only can lock setting but still can fire),only can on off...but the on off is instantly,5 click straight on or off,no splash screen
basically i go for rx200 mainly bcuz of its sexy shape and battery life

Joyetech has done it again.... another update for ur Cuboid.
Latest firmware 3.12 and....
u got the option to put ur custom logo enable!
No need to use custom firmware like before.




This post has been edited by MatShadow: Apr 22 2016, 11:43 PM

I use RX200 and cuboid for dripper. For RDTA/RTA/Tank, evic vtc mini will do the job.

I prefer handy one.

my Evic VTC Wargreymon