Cool stuff to do for Cuboid owners.
Just like Evic mini, now avail for Cuboid.

Custom firmware with logo change.

https://youtu.be/zSLilpAxb5E

I own a Cuboid & a RX200. As from my prev post, i prefer my Cuboid over RX200 as my daily driver. In fact, mu rx200 was used less than 5 charge cycle since bought. Other than being a little bulky, tis rx200 wasn't playing nice to few of my attys sometimes. My Cuboid on d other hand performs very2 well without issue ever since i bought it. My current setup are mostly either s/steel 28g @ 0.5Ω or Kanthal claptons 28+32 @ 0.37. Got an average 250puffs or 1100sec from a pair of fully charged batts. Have married 2pairs - 2x25R & 2xHE4. Both firing w/o problem wit stat as stated.
I only have a pair of vtc4 and these r for my mech mods. Did try using on my cuboid but i dont really see any significant diff in performance compared to those 25rR's or HE4's.
If given a choice, i would get genuine vtc4's over 25R than HE4. However, genuine vtc4 is hard to get. So my next preference r samsung 25R which is easier to chk if u unwrap its skin at bottom and look for d infinity symbol. Then i rewrap.
To chk batts authenticity, 1st i would weight them and compare to spec sheet. If diff less than 1.5g from stated max weight than most likely those batts are genuine. Also look for specific tell tale signs... Eg the +ve terminal pins and other spec markings.

Cuboid max 200watts @ 0.37Ω.
So far my cuboid have no prob firing @ 0.08Ω build at 95watts using 25R or HE4. Note that these are confirmed genuine batt.

Someone stated @ 50% batt Cuboid will significantly dropped in power. I never faced that problem or maybe i misunderstood. Issit same like tis.?
However, i hv had no drop in firing power at this level. I only noticed firing drop when batt level started to blink2 which i think approx 5% level.

I was salivating for a moonshot but decided tfv4 mini would be more to my likings. From reviews, all commented how its built deck design which is very troublesom to build & wick. That made me sabar for V2 instead and grab me a tfv4 micro.
Ha ha.. Bapak ada.. Abang ada.. Now Adik comel tfv4 pon ada. All in one happy family...

Pair or 25R and another pair r HE4.

I think both rated max 25A continuous. Not sure under pulse.
But what i was trying to point was that im using batt below what was recommended and still i have had no issue wit them batts. Ave puff count was above 200 @ 0.3 - 0.6Ω firing ave above 50watts. Performance drop only when batt almost drained at voltage cut point @3.2v if im not wrong.

Try to racun... U try tfv4 micro la see if u might like tis 2ml-3.5ml rta. Flavor wise... I say excellent. Again, got choice to build or use occ unlike moonshot or tornado.

Gemini rta seller = RM130 =>@ shopee

Joyetech has done it again.... another update for ur Cuboid.
Latest firmware 3.12 and....
u got the option to put ur custom logo enable!
No need to use custom firmware like before.




This post has been edited by MatShadow: Apr 22 2016, 11:43 PM

Very nice looking mod.
However, it doesn't have upgradable firmware feature + TC only for nickel & titanium...No S/Steel.
Betol?
I can live wif 60w but not w/o s/steel tc.

Thanks for heads up regarding VaporHub. Yeah we should stay away from this 'penipu' type seller.

Btw.. I need advice about Solotech 40A battery. Issit recommended or not? Or should i just stick to my all time fav VTC4 & 25R?
My thanks in advance.

@ shopee got sell also. RM300 for black. Nice looking mod and not too expensive.
However, do note that u can only adj the temp but not possible to adjust wattage in TC. Looking at the display it max out at 60w (u cant adj). Imo, this mod not a gud choice for TC vapers unless u dont mind 60w ceiling TC. It does Ni, Ti, & Ss tho.

Not sure whats causing ur tank to leak but mine cincai2 wick also didn't leak. I just make sure enuff 'cotton dlm lubang' and tis monster wicks like a champ.
28g s/steel, 9wraps @ 3mm x2
30/70 mix.
I do not close the afc when filling. Just like with my Bellus.


This post has been edited by MatShadow: Jul 18 2016, 01:36 PM

For me i don't really like cinnamon. Strawberry profile pulak ady have countless recipies as my adv, so...
Maybe can try tis. Tested and so very yummy...

Glazed Doughnut (CAP) - 2.5%
Blueberry extra (TFA) - 4%
Berry Crunch (TFA) - 1%
VBIC (TFA) - 1.5%
Sweetner to ur likings.. I used Sucrolose - 1%

I let steep 2weeks.

Help needed...
Ada siapa2 tau mana boleh beli Joyetech eGrip 2 at reasonably gud price? Wtb d s/steel version. Ady went search for a couple of weeks but nowhere to be found. Now I'm into stealthy vape and occasionally MTL wif my eGrip oled 30w.
Will also consider buying used.
Thanks in advance.