Looks like the case can put Dual 140mm/120mm fans...

So pick yer choice of which fan you choose.

140mm would be better with higher air flow and less noise.


Noctua NF-P14 , but their a bit pricey.

If you don't mind,Xigmatek XLF F140 fans does its job well too on radiators.
Its cheaper and offers 63 CFM of airflow under 16 dBa.

hi all..i want to buy f12 pwm fan...how can i connect it to psu? f12 using 4pin rite?
i dont have anymore fan header on mobo...already occupied.

You need to find the 4-pin header to 4-pin molex converter...

u know any seller selling that?
i know just niclasteoh selling Power Splitter Card

Can just plug the 4 pin to the 3 pin fan on the motherboard.
It will work too.

that also already occupied by casing fan...

ok...i guess my mobo only has two

4pin for cpu fan
3pin for that blue led fan (cm elite430 black)...

so no more header left..

Which fan can suit my Thermaltake v3 black edition?

- Front (intake):
120 x 120 x 25 mm (optional)

- Rear (exhaust):
120 x 120 x 25 mm TurboFan (1300 rpm, 17 dBA, 50.0 CFM)

- Top (exhaust):
120 x 120 x 25 mm (optional)

- Bottom (intake):
120 x 120 x 25 mm (optional)

so which fan is the best for my casing?

You want performance fan (but also quite noisy sometimes) , or the quite type ?

Since it's like not suitable for you,why not go for the normal (3-pin) one??
Then purchase the 3 pin to molex wire separately.

Ulysses - don't bother, the F12 PWM has PST header.. u can still plug in another fan on the wired extension off from the F12 PWM



u can daisy chain all ur F12 PWM fans this way

---

Added on December 21, 2011, 12:46 pmGuys, I'm thinking of replacing my dual XLF1454 (140mm blue-fin-White LED) with another quieter option (full speed from molex) if possible with LED lightings... any recommendations??

This post has been edited by Clem1982: Dec 21 2011, 12:46 PM

dude,where exactly can i get that kind of cable?ive been looking for a y-splitter everywhere bt no one seems to know what is it.i have 2 120 fan on top of my 500R and wishes to plug it str8 to my mobo instead of using ugly molex/extension cable.tq

Not much to find if your searching for white coloured LED , Bit Fenix Spectre BFF-BLF-14025W-RP , 60CFM under 18DBa (dunno if true)


If you want silent operation , Noctua NF-F14-FLX is perfect , but a bit pricey though...

thanks..yea.. bro clawhammer already explained..i just bought from him 3 f12 pwm. now i link them in that way.

Guys, need recommendation here.

Need fan with the highest cfm for pc case exhaust fan.

no need led, fancy2.

Highest CFM? no noise limit?
buy this, http://www.itocp.com/htmls/19/n-3219-4.html
Nidec Beta V, you will become deaf for a while after you power up your pc with that fan installed, and after that noise shouldnt be a problem

If your casing can install 2 140mm fan on top as exhaust then you probably dont need high CFM fan.

A couple 1600 or 2000 RPM 120x25mm fan is enough, 60CFM to 90CFM, any higher you will need 140mm fan else the noise would be a problem since smaller fan always produce more fan noise than large fan.

if like that my current cm 90cfm fan is good enough. im using cm silencio 550. only one exhaust. thanks yo

cm 90cfm is fake one, especially the CFM rating lol, there are alot of better fans out there, Scythe and Arctic, for example.
Buy a better casing, CM690 aint bad too, if you want to keep your pc cool and quite.
buy 2 cheap 140cm fan as top exhaust guarantee will improve the casing ventilation. bottom and side panel as intake.

Gentle Typhoon, Noctua, F12, Blade master, these are the best fans for the money. Sorted by both performance and price

true. dont trust cm specs. most likely tipu one. if u want high cfm can opt for slipstream. but dunno got stock or not