i want to ask something here.. im using e2180 with abit f-190hd

im using TAT and speedfan to monitor my temps..

in speedfan,
the CPU at idle is at 42 C, core0 34C and core1 30C with ambient at 29C

i read an article at anandtech and it state that the tcase (CPU) temp should be lower than tjunction (core0,core1) but why is my cpu temp is much higher than the core temp? is the measurement is right? which temp should i consider/monitor if i want to OC my cpu? kinda blurr...

mmm...that puzzle me also...how come? tcase should be higher than tjunction. try using CoreTemp instead of speed fan. this should give better results

try other programs like everest or coretemp... maybe program faulty...

Hi Sifu,
I have a question (strange one) . I tried to OC the proc staring from 1.34 until 1.61V, most of the time the CPU temp just ideal at 47 degrees. Here is the tread

- 1.34V (temp at 44 degrees)
- 1.37V (temp at 47 degrees)
- 1.42V (temp at 47 degrees)
- 1.47v (temp at 47 degrees)
- 1.50V (temp at 47 degrees)
- 1.56v (temp at 47 degrees)
- 1.61v (temp at 47 degrees)

Mobo: DFI Lanparty UT NF4 Ultra-D
Proc: AMD X2 4200+ Oced
Heatsink: Thermalright XP90 with 8.5cm fans

Is this normal or is my proc overheating. I scare i will burn my proc.

This post has been edited by hellwaker: Dec 14 2007, 11:25 PM

coretemp only shows core temperature(tjunction)...not cpu (tcase) what i wanna know... should i consider only the coretemp and ignore the tcase temperature?? since i am overclocking my cpu..

i also get this strange cpu temp which is high then core0 and core1....but i guess that is my boards problem....but my cpu temp usually 4c above core0...

CPU temp shud b lower than the core temp... around 5-8C lower...

---

Added on December 15, 2007, 10:48 amWhats ur CPU speed at those voltage?... I think ur temperature is okay... What about the load temperature?

This post has been edited by IcEMoCHa: Dec 15 2007, 10:48 AM

yea but my maximus dosent think like wat u say...instead of lower it becomes higher then core temp around 4-5c

yours is 4-5 C higher... mine is 10 C how bout that for a comparison.. haih....if only i have an extra rm100 at that time...

This post has been edited by huh?: Dec 15 2007, 03:47 PM

my everest cpu temp is oso always showing 5-6C higher than those individual cores ... incldg coretemp ones ..

u comparing among ur processor cores arr?
well, that it normal, no big deal actually

my E6750 OC@3.04 temperature idle is 21C ,load 25C....

but my system temperature is around 45~48C is it normal?

just want to ask weather got problem or not my temperature....TQ

Load only 25???
What cooling you use??

Btw, I think you do not need to open a thread solely for temperature.
You always ask this in Pinned thread

-pWs-

just air cooling lor....can u show me which pinned??maybe is my software got problem?i using gigabyte easytune5....

This post has been edited by silentnitez: Dec 18 2007, 03:26 PM

load 25c u sure?
use everest, coretemp, smartguardian snap ss & post here

Could you please tell me how to get a temperature like yours. Mine idle can only go down at most to 26C. Ambient of course 27C in Malaysia. How did you manage to get to 21C and load to only 25C.

unless your processor is cool gem..
but load 25c seems hard to believe..

Yeah, it's kinda unbelievable. Also if the ambient room temperature is 25-26C. How did it get to 21C at idle when only use air cooling.

send me the link to download everest, coretemp, smartguardian snap.... so i wonder is software problem or really lor..haha.

add about 10c to that temps, easytune 5 only shows the temp in the middle of the cpu, and not on the cores.

---

Added on December 18, 2007, 4:09 pmand, what do u use to load the cpu?

This post has been edited by bryanyeo87: Dec 18 2007, 04:09 PM