Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed
164 Pages « < 45 46 47 48 49 > » Bottom

Outline · [ Standard ] · Linear+

 PROTON SAGA BLM, FL & FLX Thread V69, 69 :3

views
     
creep
post Jan 4 2016, 11:23 AM

On my way
****
Junior Member
531 posts

Joined: Jan 2003
From: Cheras
QUOTE(davidke20 @ Jan 4 2016, 11:00 AM)
In KL? You may consult my personal trusted workshop. Kindly contact Michelle Yee Maxis2 - 3IIO4II. The last time I did for Savvy was RM300+, Iswara RM250, Wira RM380, FLX RM440. Since GST imposed and RM deficit, price may be different abit. Do not hesitate to mention David the insurance company manager introduction. Do not worry as I do not take any commission nor anyway affiliate with the shop. So, whatever price you've managed to negotiate with her, is entirely between you and the shop. Meanwhile, they also offer solution of PATCHING depending on the damage. If not too severe, they'll try to salvage the windscreen without pocking a hole in your pocket for the windscreen replacement. Good luck.
*
ok tqvm notworthy.gif
hurricane21
post Jan 4 2016, 11:52 AM

Senior Probation
******
Senior Member
1,389 posts

Joined: Feb 2006
From: Southern Region
Hi, how much cost needed to repair timing belt? My car just die after start. Saga 2008 campro

Thanks
TitanRev
post Jan 4 2016, 01:23 PM

New Member
*
Junior Member
9 posts

Joined: Nov 2012
QUOTE(FLXM @ Jan 3 2016, 04:15 PM)
bro.
how to check engine oil temperature?
*
QUOTE(akmalrosli @ Jan 3 2016, 04:17 PM)
OBD2 reader. I'm using a bluetooth one.
*
QUOTE(JamesBotak @ Jan 4 2016, 10:37 AM)
I'm sorry but as far as I know, we can't read oil temperature from an OBD2 reader as our gaga does not have an oil temp sensor and to be able to read oil temp from oil temp meter, we will need to get an oil temp sensor (or sometimes it comes together with the oil temp meter).

Could you have mistakenly referred to water temp instead?

Or could you share the exact ODB2 unit and the software/app you're using ?

icon_rolleyes.gif
*
Yes in order to read oil temp you need to install aftermarket gauge and adapter plate. OBD2 will get oil temp reading only if the car got oil temp sensor already.

Here's how I wired up my oil temp gauge very factory fitted look. being a picky person, I don't want to have a gauge sticking out of the dash like a sore thumb. It will make the dash looks very weird and not tidy looking.
user posted image

This post has been edited by TitanRev: Jan 4 2016, 01:25 PM
JamesBotak
post Jan 4 2016, 01:53 PM

Casual
***
Junior Member
373 posts

Joined: Oct 2014
QUOTE(TitanRev @ Jan 4 2016, 01:23 PM)
Yes in order to read oil temp you need to install aftermarket gauge and adapter plate. OBD2 will get oil temp reading only if the car got oil temp sensor already.

Here's how I wired up my oil temp gauge very factory fitted look. being a picky person, I don't want to have a gauge sticking out of the dash like a sore thumb. It will make the dash looks very weird and not tidy looking.
user posted image
*
Joe, what oil temp meter are you using ? How much is the adapter and meter ? Can you fix for me ? blush.gif

Btw you place the meter in your aircond outlet ? So you driver side got no air ?

icon_rolleyes.gif icon_rolleyes.gif icon_rolleyes.gif
ericmaxman
post Jan 4 2016, 01:55 PM

-
*******
Senior Member
7,951 posts

Joined: Sep 2005
QUOTE(JamesBotak @ Jan 4 2016, 01:53 PM)
Joe, what oil temp meter are you using ? How much is the adapter and meter ? Can you fix for me ?  blush.gif

Btw you place the meter in your aircond outlet ? So you driver side got no air ?

icon_rolleyes.gif  icon_rolleyes.gif  icon_rolleyes.gif
*
TitanRev drives so fast, he doesn't need aircon
TitanRev
post Jan 4 2016, 02:21 PM

New Member
*
Junior Member
9 posts

Joined: Nov 2012
QUOTE(JamesBotak @ Jan 4 2016, 01:53 PM)
Joe, what oil temp meter are you using ? How much is the adapter and meter ? Can you fix for me ?  blush.gif

Btw you place the meter in your aircond outlet ? So you driver side got no air ?

icon_rolleyes.gif  icon_rolleyes.gif  icon_rolleyes.gif
*
I'm using a WORKS Pro 2 gauge. Adapter depends on what type you want to use. I'm using a MOROSO oil adapter. 1 type has inlet outlet for oil cooler another type is just for sensor. If you have future plans to put in oil cooler just get a oil adapter with oil cooler in/out but block them temporary until you install an oil cooler in the future but remember if put oil cooler for campro the oil pump gear need to be upgraded 1st. installing the oil temp gauge requires you to remove the oil filter so you better do it during oil change. you can buy the parts yourself and install it during oil change. I would like to help but I really can't free out some time at this period.... notworthy.gif

I block the AC vent with 5mm insulation tape use for AC one. so it redirects the AC to other outlet. Yeah my driver side no AC but didn't bother about it because once you block your driver side AC the other vents AC will be stronger.
TitanRev
post Jan 4 2016, 02:25 PM

New Member
*
Junior Member
9 posts

Joined: Nov 2012
QUOTE(ericmaxman @ Jan 4 2016, 01:55 PM)
TitanRev drives so fast, he doesn't need aircon
*
I pakai ni saja
user posted image
ericmaxman
post Jan 4 2016, 02:26 PM

-
*******
Senior Member
7,951 posts

Joined: Sep 2005
QUOTE(TitanRev @ Jan 4 2016, 02:25 PM)
I pakai ni saja
user posted image
*
memang is sifu notworthy.gif

on a side note, engine oil hilangs
JamesBotak
post Jan 4 2016, 03:21 PM

Casual
***
Junior Member
373 posts

Joined: Oct 2014
QUOTE(ericmaxman @ Jan 4 2016, 01:55 PM)
TitanRev drives so fast, he doesn't need aircon
*
thumbup.gif

QUOTE(TitanRev @ Jan 4 2016, 02:21 PM)
I'm using a WORKS Pro 2 gauge. Adapter depends on what type you want to use. I'm using a MOROSO oil adapter. 1 type has inlet outlet for oil cooler another type is just for sensor. If you have future plans to put in oil cooler just get a oil adapter with oil cooler in/out but block them temporary until you install an oil cooler in the future but remember if put oil cooler for campro the oil pump gear need to be upgraded 1st. installing the oil temp gauge requires you to remove the oil filter so you better do it during oil change. you can buy the parts yourself and install it during oil change. I would like to help but I really can't free out some time at this period.... notworthy.gif 

I block the AC vent with 5mm insulation tape use for AC one. so it redirects the AC to other outlet. Yeah my driver side no AC but didn't bother about it because once you block your driver side AC the other vents AC will be stronger.
*
Joe, can point me to where can I get the meter and adapter ? Seremban area would be better as nearer. I guess I'll go with the sensor type only.

There's another type with oil pressure sensor right ? But I guess I won't utilize the pressure part at all as my yinginn is pure stock... tongue.gif

icon_rolleyes.gif


TitanRev
post Jan 4 2016, 03:29 PM

New Member
*
Junior Member
9 posts

Joined: Nov 2012
QUOTE(JamesBotak @ Jan 4 2016, 03:21 PM)
thumbup.gif
Joe, can point me to where can I get the meter and adapter ? Seremban area would be better as nearer. I guess I'll go with the sensor type only.

There's another type with oil pressure sensor right ? But I guess I won't utilize the pressure part at all as my yinginn is pure stock...  tongue.gif

icon_rolleyes.gif
*
Oil adapter all comes with 2 sensors point, you can plug off the other point with a sealed screw. Yes I got my stuff in sban
n3w
post Jan 4 2016, 08:36 PM

Casual
***
Junior Member
350 posts

Joined: Nov 2009
QUOTE(TitanRev @ Jan 4 2016, 02:21 PM)
I'm using a WORKS Pro 2 gauge. Adapter depends on what type you want to use. I'm using a MOROSO oil adapter. 1 type has inlet outlet for oil cooler another type is just for sensor. If you have future plans to put in oil cooler just get a oil adapter with oil cooler in/out but block them temporary until you install an oil cooler in the future but remember if put oil cooler for campro the oil pump gear need to be upgraded 1st. installing the oil temp gauge requires you to remove the oil filter so you better do it during oil change. you can buy the parts yourself and install it during oil change. I would like to help but I really can't free out some time at this period.... notworthy.gif 

I block the AC vent with 5mm insulation tape use for AC one. so it redirects the AC to other outlet. Yeah my driver side no AC but didn't bother about it because once you block your driver side AC the other vents AC will be stronger.
*
Free for super short meet up bo on 11th. sleep.gif

Confirm drop by seremban 2 aeon jusco di. laugh.gif
TitanRev
post Jan 4 2016, 09:57 PM

New Member
*
Junior Member
9 posts

Joined: Nov 2012
QUOTE(n3w @ Jan 4 2016, 08:36 PM)
Free for super short meet up bo on 11th. sleep.gif

Confirm drop by seremban 2 aeon jusco di. laugh.gif
*
Time please....coz that day I got HACCP/ISO22000 things...
wan.ridzuan
post Jan 4 2016, 10:04 PM

Getting Started
**
Junior Member
172 posts

Joined: Feb 2012
From: Georgopol



salam.. hi guys,

im quite noob where it come to car things. but I do know 1 or 2 things. laugh.gif

ok straight to the point,

my saga flx aged 3 years with mileage around 38k..
I do regular service every 3 month and only 1 thing that worried me is battery life.
afaik, need to change every 2 years right but my how can i know when it time to change it? can i just go to the shop ask them to check? scared will kena tipu. laugh.gif
or can i just go to any shop ask for battery maintenance? laugh.gif
n3w
post Jan 4 2016, 10:50 PM

Casual
***
Junior Member
350 posts

Joined: Nov 2009
QUOTE(TitanRev @ Jan 4 2016, 09:57 PM)
Time please....coz that day I got HACCP/ISO22000 things...
*
Maybe evening. Time when reach inform lo.
FerozFLX
post Jan 4 2016, 10:50 PM

New Member
*
Newbie
1 posts

Joined: Sep 2015
From: wangsa maju kl
QUOTE(wan.ridzuan @ Jan 4 2016, 10:04 PM)
salam.. hi guys,

im quite noob where it come to car things. but I do know 1 or 2 things. laugh.gif

ok straight to the point,

my saga flx aged 3 years with mileage around 38k..
I do regular service every 3 month and only 1 thing that worried me is battery life.
afaik, need to change every 2 years right but my how can i know when it time to change it? can i just go to the shop ask them to check? scared will kena tipu. laugh.gif
or can i just go to any shop ask for battery maintenance? laugh.gif
*
My batery already kong last nite... I using it for 2years 2 month... Milage already 55k.. Better you go change ur before cannot start.. I buy batery not from sc.. Outside workshop quote me 160 sel kering...
FLXM
post Jan 4 2016, 11:27 PM

New Member
*
Newbie
0 posts

Joined: Dec 2015
From: Alor Star - KL
QUOTE(JamesBotak @ Jan 4 2016, 10:37 AM)
I'm sorry but as far as I know, we can't read oil temperature from an OBD2 reader as our gaga does not have an oil temp sensor and to be able to read oil temp from oil temp meter, we will need to get an oil temp sensor (or sometimes it comes together with the oil temp meter).

Could you have mistakenly referred to water temp instead?

Or could you share the exact ODB2 unit and the software/app you're using ?

icon_rolleyes.gif
*
exactly my thought on this! whistling.gif whistling.gif
Jusb
post Jan 4 2016, 11:29 PM

Getting Started
**
Junior Member
69 posts

Joined: Sep 2007
QUOTE(wan.ridzuan @ Jan 4 2016, 10:04 PM)
salam.. hi guys,

im quite noob where it come to car things. but I do know 1 or 2 things. laugh.gif

ok straight to the point,

my saga flx aged 3 years with mileage around 38k..
I do regular service every 3 month and only 1 thing that worried me is battery life.
afaik, need to change every 2 years right but my how can i know when it time to change it? can i just go to the shop ask them to check? scared will kena tipu. laugh.gif
or can i just go to any shop ask for battery maintenance? laugh.gif
*
you can ask them plug a tool to your battery terminal to check the voltage, around 12V
wan.ridzuan
post Jan 4 2016, 11:43 PM

Getting Started
**
Junior Member
172 posts

Joined: Feb 2012
From: Georgopol



QUOTE(Jusb @ Jan 4 2016, 11:29 PM)
you can ask them plug a tool to your battery terminal to check the voltage, around 12V
*
around 12v should be fine rite?
JamesBotak
post Jan 5 2016, 09:19 AM

Casual
***
Junior Member
373 posts

Joined: Oct 2014
QUOTE(FerozFLX @ Jan 4 2016, 10:50 PM)
My batery already kong last nite... I using it for 2years 2 month... Milage already 55k.. Better you go change ur before cannot start.. I buy batery not from sc.. Outside workshop quote me 160 sel kering...
*
Mind sharing what brand is the battery ? blush.gif
djhenry91
post Jan 5 2016, 09:27 AM

Slow and Steady
*******
Senior Member
6,779 posts

Joined: Jan 2009
From: SEGI Heaven
JamesBotak brand..last 5 years sel kering
cheap cheap lol
« Next Oldest · Car Clubs · Next Newest »
 

164 Pages « < 45 46 47 48 49 > » Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
 0.0411sec    0.77    6 queries    GZIP Disabled
Time is now: 18th December 2025 - 01:05 AM
All Rights Reserved © 2002- 2025 Vijandren Ramadass (~unite against racism~)
Removal Request
Powered by Invision Power Board © 2025  IPS, Inc.