Finally...hello from Belgium

I not sifu la....
Will be going to Paris also from Belgium

Here's a reference of a 1.3 (lightly ported and fully polished) Throttle body and a 1.6 (Ported and semi polished) Throttle body. The 1.6 TB can be ported to a maximum of 67mm if I still remember the figures correctly. Also on the side of the TB where the black plastic cover, you can open it up and clean the contact grid and do some minor adjustment to butterfly valve. The adjustment is similar to adjusting the pedal copper contact grid. I won't recommend those who are new to DIY open the plastic cover.


Just some extra information, CPS Throttle body is different from IAFM+ so are they compatible to our non CPS engine...this I'm not sure but Persona TB will fit our saga without any issue.

Happy modding.

Match with a EK9 lip and a 2nd EPDM lower lip...lagi nice..

Some kind of rubber lip flexible and not easy to break.

I cut away the center bit then spray the metal center piece to flat black. So I totally removed the center piece of grill as you can see from my siggie.

Yes, the center part. Onc you sprayed it it will be less noticeable.

sellkarbaiLexus

Sharing some car pics I took in Paris during my very recent trip to Italy, Belgium and France. Been there close to 2 weeks, for work and honeymoon...kesian MYR value really so small there so I use SGD most of the time there...
















This post has been edited by TitanRev: Nov 28 2015, 04:25 PM

Some pictures from my business related stuff.
Yep, this is the Toyota you know making cars. They are also making weaving machines from fabrics to CF. Things like seat fabrics, airbag, Carbon Fiber..etc..


Some different grades and combinations of weaved Carbon Fiber. Which determine it's strength and weight.


Carbon Fiber itself a rigid fabric which most people didn't know before it is shape into something. It can be made into any shapes. Here's an exhaust cowl for Akaprovic exhaust.



CF plate anyone?


A Bimmer M3 was showcased outside the expo as they are 1 of the main exhibitor for EICMA

Summary of scenery pictures...too much to upload and post
This is Duomo of Milan

Sforza Castle. That's my wife on the bottom right of the picture...


Brussels Town Hall. We went to Roselare, and Brugge also


Manneken Pis area


Atomium building built during the 1958 World Expo. Pretty cold structure


Ypres, Menin Gate


Brugge, Town hall

1-5 Celcius daily and sometimes small rain. Got 1 day rain hail also.

No la coz I'm attending expo children below 16 cannot enter so no bring my kids

Friday morning.

The center nut under the cap or the 3 nuts locking the top mount? a little rust is normal coz the nuts are not stainless steel. Unless you change to stainless steel.

Just the nut. The bolt rust is in the center allen hole right?

Takda....

That's kinda more rust than I expected. Try to ask Sc for replacement under warranty. How old is UR car and u wash engine bay a lot?

This post has been edited by TitanRev: Dec 1 2015, 08:49 PM

I see your pic the absorber top screw thread also can't see already. Maybe try use WD40 remove the rust and see if still got the screw thread.

Wait I check for you the TCU still have or not

0148360430 Zulazwan call this guy and ask is his CVT Ecu still have for sale. RM450 he also got a AT TCU for sale RM1200