QUOTE(SKYjack @ Jul 7 2016, 11:33 AM)
Your aircon problem may be due to evaporator loosing cooling efficiency. SC is not equipped to handle this problem,you have to look for aircon specialist. Evaporator is not easy access on Pugs!
Coolant level at Min will not cause temp. rise. However it is adviserable to topup. You should get level low waning if coolant drops too low, but I wouldn't wait for that.
From day 1 for 4 years I have been complaining about coolant level drop. SC reply all this while has been, "checked no leak" and they topup coolant. They never answered my question "if no leak,where does the coolant go". My drop in level is about 10mm in 6 months. I have always suspected water pump and suggested to SC. SC come up with same reply " checked no leak".
Under the enhancement package water pump was changed. Guess what, my coolant level is constant now, no drop. It's only 3 months since the enhancement work, so I'm keeping a close watch.
It is possible to develop hairline cracks on heat treatment process( harding process of metal parts) during manufacture. I believe Peugeot QC picked out the flaws and proceeded with the enhancement package.
Today, i went to keningau...b4 driving i topup the coolant....went using kimanis road through banjaran crocker...this pug been push to the max uphill this crocker...in the middle of the hiking the temperature begin to rise...i did notice and try to switch off the air con...the temperature drop to normal...inb4 my coolant cap crack n waiting 4 sc to order...Coolant level at Min will not cause temp. rise. However it is adviserable to topup. You should get level low waning if coolant drops too low, but I wouldn't wait for that.
From day 1 for 4 years I have been complaining about coolant level drop. SC reply all this while has been, "checked no leak" and they topup coolant. They never answered my question "if no leak,where does the coolant go". My drop in level is about 10mm in 6 months. I have always suspected water pump and suggested to SC. SC come up with same reply " checked no leak".
Under the enhancement package water pump was changed. Guess what, my coolant level is constant now, no drop. It's only 3 months since the enhancement work, so I'm keeping a close watch.
It is possible to develop hairline cracks on heat treatment process( harding process of metal parts) during manufacture. I believe Peugeot QC picked out the flaws and proceeded with the enhancement package.
😯😯
I will push sc to check the water pump again...
Jul 7 2016, 12:46 PM

Quote
0.0286sec
0.66
6 queries
GZIP Disabled