you made the right choice bro. dont have the 0.5hp one? because mhi 0.5hp can accommodate 200sqft room so electricity consumption will be lower. mhi should be more reliable because the heavy duty industry one. the drawback only the noisy indoor unit.

you made the right choice bro. dont have the 0.5hp one? because mhi 0.5hp can accommodate 200sqft room so electricity consumption will be lower. mhi should be more reliable because the heavy duty industry one. the drawback only the noisy indoor unit.

My master room is 288sqf.

Actually u should go for 1.5hp at least then the power consumption will be lesser than 1hp

https://papamy.panasonic.com.my/papamy/faq.html

Only 9000BTU needed, and 1hp already very near to that rating. Furthermore for sleeping i never turn my temp lower than 26...mostly i set @ 26'C or 27'C, why i need 1.5hp then?

Share some chemical wash, the Aircon has been 10 yrs old, after done like new look, also bad smell & weak airflow turn back to normal.

How often we should do chemical wash / major service on our aircond at home in order to prolong the aircond operability/maintain its coolness?

1 year once?
2 year once?
5 year once?
etc?

Alot of versions out there, MHI not good la, MEQ singaporean favorite la, MEQ is Japan la, MHI got its own factory la. Different aircond shop different story, and your story different too. The only thing i know, MHI is not a newly accomplish company, and it involve in commercial heavy duty aircond system very long time, so residential aircond is just a kacang putih to them, and MHI even exist and support Japan during WW2. More into budget user becos it cheaper than ME?? Hell no and not logic at all. I can also say ME is expensive becos its name. Singapore user prefer MEQ not necessary means MHI quality is inferior compare to ME, just becos ME also produce fridge and other electrical appliance, so its name is more familiar compare to MHI in SG. If you look at MHI brochure, the PCB inside the MHI compressor is comformal coated to prevent corrosion by humidity, ME got or not? No. Support wise, ME service center is at Tun Aminah, MHI is at Johor Jaya, i can't see any lack of support at all.

Anyway, I just purchased a 2HP MHI inverter and 1HP MHI inverter, 1HP i choose premium YL series, which got alot of comfy and extra features compare to my current ME GJ10, and lower consumption too (0.67kW vs 0.8kW), so this new MHI will be my main aircond for my master bedroom since i will use it 10 hours per night everynight. The current ME 1hp will move to guess bedroom for reserve purpose, and the 2hp model i choose YN series, only less comfy airflow function, the rest are same. Outcome, i save almost RM400 compare to ME.

That is ok.

Actually u should go for 1.5hp at least then the power consumption will be lesser than 1hp

mhi just different. mine 0.5hp can accommodate 200sqft. if 1hp should be 400sqft. 27 degrees already freeze cold

Is there any air condition with detachable fan. That cylindrical fan difficult to clean.

kimsim,what is the main concern when we need to choice the best energy saving aircon?firstly are we refer to power consumption or EER rated.now very confusing.

mhi just different. mine 0.5hp can accommodate 200sqft. if 1hp should be 400sqft. 27 degrees already freeze cold

hi guys, anyone know where can i get replacement remote control for Mitsu air cond?

Which brand? ME or MHI has 2 different company

If ME can search online Google and type in Melco malaysia

oh? there is? didn't know that. not sure but it's an old unit. more than 10 years liao.

Just realise you turn on almost high fan speed, did you clean out filters very often?