Welcome Guest ( Log In | Register )

29 Pages « < 14 15 16 17 18 > » Bottom

Outline · [ Standard ] · Linear+

 Aircon Discussion V3, Home Appliance

views
     
SUSkimsim
post Aug 26 2015, 02:32 PM

Let Me ❤️ You
*******
Senior Member
5,847 posts

Joined: Nov 2010
From: Malaysia 🇲🇾


QUOTE(aeiou228 @ Aug 26 2015, 02:17 PM)
Isn't that we are supposed to clean the original filter free of dust frequently so that the Aircon can have resistance free air low and save electric energy? Putting on an extra layer of filter is akin to adding a layer of dust to the filter, no ? hmm.gif
*
Original filter were not enought fine to blocked dust & debris.

You can try without extra Daiso filter after 3-6 mths the cooling coil can be turn into black color and some dusty on fan blower, how to check just use ur iPhone touchlight and point to fan blower, when Aircon no working, just slightly adjust a bit on air swing blade.

After place with additional filter within 6-12 mths the cooling coils still very new and the fan blower just slighly dust only, but make sure change very often within 3-4 mths time per 8hrs daily usage

Check here if you wanna see it true or not
http://www.kimrovacstore.com/mitsubishi-el...lean-video.html

This post has been edited by kimsim: Aug 26 2015, 02:37 PM
SUSkimsim
post Aug 26 2015, 02:48 PM

Let Me ❤️ You
*******
Senior Member
5,847 posts

Joined: Nov 2010
From: Malaysia 🇲🇾


QUOTE(davidletterboyz @ Aug 26 2015, 02:44 PM)
Thanks for replying. smile.gif
Is Daikin 1.5hp inverter OK? Will it be noisy? haha

I heard they are ex-York. So the hardware and design are totally based on Daikin Japan or they just converted from York models they had before?  unsure.gif
*
Choose inverter model is ok, will be slighly lower 3 dBA to compare from non inverter will be slighly noisy than inverter model.

But cooling wise you can't expected and quite impressive over York or Daikin DNA York design also copy from Daikin Thailand model just remove out motion eye only.

Actually when York starting has 1st R410a is already consider 80% DNA from Daikin Japan just modify the design only
SUSkimsim
post Aug 26 2015, 03:53 PM

Let Me ❤️ You
*******
Senior Member
5,847 posts

Joined: Nov 2010
From: Malaysia 🇲🇾


QUOTE(ozak @ Aug 26 2015, 03:52 PM)
When you put in the extra filter, it already block some figure of airflow. That is not include the dust fill up and block it later.

Dismantle the unit and wash the condenser doesn't require to fill the gas again.
*
Dismantle cost vs Rm5 Daiso seems like how many percent you pay for?
SUSkimsim
post Aug 26 2015, 04:00 PM

Let Me ❤️ You
*******
Senior Member
5,847 posts

Joined: Nov 2010
From: Malaysia 🇲🇾


QUOTE(coolkwc @ Aug 26 2015, 03:56 PM)
I can't brain why ppl opt for dismantle condenser rather than add in extra filter.
*
Different ppls and different mindset.

I have no comment, sound like use Brick and smack on my leg

This post has been edited by kimsim: Aug 26 2015, 04:00 PM
SUSkimsim
post Aug 26 2015, 04:09 PM

Let Me ❤️ You
*******
Senior Member
5,847 posts

Joined: Nov 2010
From: Malaysia 🇲🇾


QUOTE(coolkwc @ Aug 26 2015, 03:55 PM)
I will avoid dismantle condenser and blowing fan if possible. I rather change my filter every month if i really worry about blockage. You actually can buy a filter and try look through it, a layer of filter isn't as restricted as you thought.
*
Actually if you are think from seller they won't agree use extra filters, will be impact from Aircon serving amount.

For those user for sure is happy always cause serving are less and spend less money to maintenaces

This post has been edited by kimsim: Aug 26 2015, 04:10 PM
SUSkimsim
post Aug 26 2015, 06:15 PM

Let Me ❤️ You
*******
Senior Member
5,847 posts

Joined: Nov 2010
From: Malaysia 🇲🇾


QUOTE(Galaxy Angel @ Aug 26 2015, 05:54 PM)
Dear all, I plan to install air-con for master room.
Is it advisable to place the compressor unit on open area which will expose to sun light and rain? If doing that, will this shorten the compressor life spam? As I don't have awing on my second floor. =(
*
Sun light still ok, just avoid to place on afternoon sun area.
Will be waste more energy than place on facing into East / west area

This post has been edited by kimsim: Aug 26 2015, 06:16 PM
SUSkimsim
post Aug 26 2015, 06:20 PM

Let Me ❤️ You
*******
Senior Member
5,847 posts

Joined: Nov 2010
From: Malaysia 🇲🇾


QUOTE(aeiou228 @ Aug 26 2015, 06:17 PM)
Ozak, I planing to buy this aircon cleaning water container from taobao. Around RMB19 to RMB33. Then buy the cooling coil cleaner in spray can from Mr DIY to diy cleaning without taking the indoor unit down. If you want to tumpang and share the shipping cost, let me know. 
user posted image
*
Use it won't be 100% clean and water can't reach 100% on the back of fins
SUSkimsim
post Aug 26 2015, 06:42 PM

Let Me ❤️ You
*******
Senior Member
5,847 posts

Joined: Nov 2010
From: Malaysia 🇲🇾


QUOTE(aeiou228 @ Aug 26 2015, 06:33 PM)
No problem, it will help to reduce the frequency of paid service for thorough cleaning.

You use extra filter no need to do thorough cleaning at all ?? The cooling coil totally shield from dust built up ??
*
Ya already 5-6 yrs from new Aircons never did chemical wash or water spray on cooling coil fins at all, never blocks on coil fins layer, even internal layer as well, just need to remove out fan blower for spray on jet water for clean out that so, so my FCU never dismantle down since day 1.

Dunno how save money, just use and forget.
That is why additional filter is a great stuff can be shares with you guys

The dangerous thing such as PCB portion, if never remove down and accidently spray on water just said bye bye, for indoor unit.
SUSkimsim
post Aug 27 2015, 08:31 AM

Let Me ❤️ You
*******
Senior Member
5,847 posts

Joined: Nov 2010
From: Malaysia 🇲🇾


QUOTE(cucubud @ Aug 27 2015, 07:35 AM)
I am interested in this item.
How much is it if 2 of us group together?
This is good for cleaning the blower.

I clean the cooling fins with water and a paint brush every month.
The dirty water will flow down the drain. No issue here.

I also clean the blower with water and brush, but the dirty water dripped onto the floor.
I used an old bath towel to catch the dirty water. Still got a lot of dirt drop onto the floor.
I don't clean the blower every month. Only when it is full of dirt and the air flow is low.

This item is a good replacement to the bath towel to catch the dirty water.

Let me know how much in total.
*
Good to have one at least, can DIY at home

SUSkimsim
post Aug 27 2015, 02:16 PM

Let Me ❤️ You
*******
Senior Member
5,847 posts

Joined: Nov 2010
From: Malaysia 🇲🇾


Actually I had mention before, not all Aircon design were able to removable out.

Like some fan motor is hide below PCB box compartment, once you remove it then baru can access to screw out for fan blower connection joint.

This post has been edited by kimsim: Aug 27 2015, 02:16 PM
SUSkimsim
post Aug 28 2015, 04:10 PM

Let Me ❤️ You
*******
Senior Member
5,847 posts

Joined: Nov 2010
From: Malaysia 🇲🇾


QUOTE(Galaxy Angel @ Aug 28 2015, 10:31 AM)
ok, thanks for the info ya, then is ok, cos my master room facing to east, means sun will be at back (west) during afternoon. =)
Expose to rain, no issue, right?
*
No issue, the outdoor condenser is proper design for expose to sun, just some cheap brand will be slighly getting rusty due to air, sun and dirty.

Just avoid to place at afternoon sun, the compressor will works harder to compare in cooling area.
SUSkimsim
post Aug 28 2015, 04:11 PM

Let Me ❤️ You
*******
Senior Member
5,847 posts

Joined: Nov 2010
From: Malaysia 🇲🇾


QUOTE(coolkwc @ Aug 28 2015, 11:12 AM)
I bought 1.5k+ for that. However mine is premium model, is u put 1 step down to deluxe model, only 1.4k, which still feature richer than MEQ non-deluxe model.
*
I got the answer Liao.

MHI compressor = MIC
ME compressor = MIJ, that is why ME more expansive
SUSkimsim
post Aug 28 2015, 05:10 PM

Let Me ❤️ You
*******
Senior Member
5,847 posts

Joined: Nov 2010
From: Malaysia 🇲🇾


QUOTE(Galaxy Angel @ Aug 28 2015, 05:06 PM)
OK, thanks Kim Sim.

I have another more headache issue need your advise, my house already have air-con wiring, PVC piping (conceal) & copper piping (conceal) during house renovation since last year, the copper piping that I have is for normal refrigerant (R22) NOT R410a.

Now I am going to buy the new air-con and came to know most of the manufacturer already used refrigerant R410a for the air-con, my question is, is there a conversion kit or adapter out there can be used for existing R22 piping? As impossible for me to hack and install the new piping again just for refrigerant  R410a.

Again there for your advise.
*
If that time u have consider for R410a copper pipes n now still can be use back, just need to plugging only.

At that time just pay for cheap installation fee, most likely can't use at all.

Cause use but leaking gas will be high chance
SUSkimsim
post Aug 28 2015, 09:42 PM

Let Me ❤️ You
*******
Senior Member
5,847 posts

Joined: Nov 2010
From: Malaysia 🇲🇾


QUOTE(coolkwc @ Aug 28 2015, 09:40 PM)
What is MIC? Malaysian Indian Congress? MIJ?
*
Made in China = MIC
Made in Japan = MIJ

SUSkimsim
post Aug 28 2015, 09:47 PM

Let Me ❤️ You
*******
Senior Member
5,847 posts

Joined: Nov 2010
From: Malaysia 🇲🇾


QUOTE(coolkwc @ Aug 28 2015, 09:43 PM)
Bullshit la you...hahaha laugh.gif still dream of Made in Japan?
*
Why don't believed, all ME MEQs assembled in Thailand for the rest model, even parts still under Japan made.

user posted image

SUSkimsim
post Aug 28 2015, 10:12 PM

Let Me ❤️ You
*******
Senior Member
5,847 posts

Joined: Nov 2010
From: Malaysia 🇲🇾


QUOTE(coolkwc @ Aug 28 2015, 09:55 PM)
[attachmentid=4844328] whistling.gif
*
How bout indoor also made in Thailand?

Actually better than China lah
SUSkimsim
post Aug 28 2015, 10:29 PM

Let Me ❤️ You
*******
Senior Member
5,847 posts

Joined: Nov 2010
From: Malaysia 🇲🇾


QUOTE(coolkwc @ Aug 28 2015, 10:24 PM)
Don syiok sendiri la u...give me a prove the part is made in Japan. whistling.gif

Lazy to argue with you. I thought you got any true info, obviously listen from other also. As i said i did heard alot of story version regarding MHI vs MEQ, i believe none of that, not to say including yours.

Nevermind la, u go support ur MEQ la, for best quality la, made in Japan la...as long as you believe and happy. i continue with my MHI one.
*
Ha ha since you had owned a ME but also never trust thier condition and quality at all.
One day MHI compressor loud like hell, then you just keep quiet only.

In Sg most of Aircons technical will be prefer on ME, cause thier design and material are better than others lah.

Anyway u shock with MHI just enjoy it.
SUSkimsim
post Aug 28 2015, 10:43 PM

Let Me ❤️ You
*******
Senior Member
5,847 posts

Joined: Nov 2010
From: Malaysia 🇲🇾


QUOTE(coolkwc @ Aug 28 2015, 10:36 PM)
Why u always refer SG ppl for quality method?? I really no idea on that. SG ppl high quality lifestyle, so what they choose is high quality as well? laugh.gif You adi many times, not only once, mentioned about SG ppl preference blah blah blah to convince ppl what SG ppl choice = quality choice so we Malaysian need to follow as well? doh.gif

You also said before, SG MEQ is starmex, MY MEQ is Thailand, cut cost model, both are different quality, u are like slap you own face with your hand.

For me u are just like a MEQ promoter, u got commision one ah for so hard sell? laugh.gif
*
Haiya, dunno MHI pump you how much into your personal account now...

Talks like salesman too laugh.gif

Just now I had meantion already, MHI compressor are made in China, that is why u paid for cheaper, to be compare as ME lah.. ME made in Thailand does not meant 100% parts from Thailand made.

M'sia ME due too currency impact, then you pay more is common, unlike MHI some parts still under China and assembled in Thailand for packing only.

Unlike MHI condenser wires connect dunno which one to which wires, really China idea

This post has been edited by kimsim: Aug 28 2015, 10:47 PM
SUSkimsim
post Aug 28 2015, 11:49 PM

Let Me ❤️ You
*******
Senior Member
5,847 posts

Joined: Nov 2010
From: Malaysia 🇲🇾


QUOTE(jimmy lai @ Aug 28 2015, 10:51 PM)
Hi Sifu,if compare your mhi deluxe inverter to samsung inverter AR09JVFSB which one will be more energy saving and durable?thanks
*
I believe LG Artcool mirror more energy saving, cause thier 1hp just 600w only
SUSkimsim
post Aug 29 2015, 08:54 AM

Let Me ❤️ You
*******
Senior Member
5,847 posts

Joined: Nov 2010
From: Malaysia 🇲🇾


Ha ha someone never get know interior what happening, what is why claim on fully Thailand made, just assemble parts and packing in Thailand only.

Pay so cheap don't thing they can offer such good thing.

29 Pages « < 14 15 16 17 18 > » Top
 

Change to:
| Lo-Fi Version
0.0388sec    0.47    7 queries    GZIP Disabled
Time is now: 5th December 2025 - 12:50 AM