anyone got latest ATE price list for LL casings?

just follow the old one, no price change unless there was a promotion, when it does i bet this thread would busy talking bout it

thx for the quick reply man..

so i need some advice now,
im thinking of getting either the PC-7S from irangan's bulk or
get a PC-007 from ATE itself..
according to the prices above la
coz i want fully alu case and my budget abt 250..

i need some views abt the PC-007!


PS. it says wit transparent side window and 25cm fan, so its THIS one, right? or izzit just this one?
kinda confused here

thx guys!

This post has been edited by james2306: Jun 8 2007, 04:01 PM

both case (PC-7S & PC-007) got the same exterior & interior design except for their front panel design

1. both case place their front i/o panel at the bottom front of the case which PC-007 got metal cover for it while 7S doesn't
2. both case got 1x 120mm front fan
3. both case got 1x 120mm rear fan
4. both case got 1x 80mm top fan
5. both case got 4x 5" bay drive
6. both case got 3x 3.5" internal bay drive & have the same design too
7. 007 got 2x 3.5" external bay drive but not 7S case

so it's up to u which design suits ur taste

This post has been edited by E-J@1: Jun 8 2007, 04:09 PM

both are PC-007, just 1 come with 25cm fan and another don't have.
this is the one come with 25cm fan:


this is the normal PC-007:

wow, very nice support guys, thx a million!

so, im thinking of going for the 007
but 1 question, that 25cm fan, izzit really useful in terms of airflow? wont it be noisy?

I'd say, noise won't be much of an issue for this fan. Larger fans make less noise compared to smaller fans, due to the fact that larger fans have slower RPMs and larger fan blades. If you know your air dynamics, though it spins slower, its size means that the airflow is more or less the same, just in case you were wondering....

However, most people opt for the NON-25cm fan because it isn't actually very pleasing to the eye, and if anything should happen to the fan, you'd be left with a giant hole in your side panel with a 1 in a 1000 chance of finding a replacment fan of that size, unless of course ATE starts selling them

Hope this is helpful, and best wishes to your new upcoming Lian Li!

This post has been edited by Samanoske Akechi: Jun 8 2007, 05:48 PM

thanks to all for ur help, ill go to ATE and have a better look at the case and that fan..
well, if anything does happen, im sure i can just replace the side panel, all lianli's in this range have same dimensions anyway

I got a question here...
For some LL casing, there will be a 12cm patent cooling kit come with it, like PC-G7... Actually, it use to blow in the cool air to the GC or exhaust the hot air out that release from the GC??

By default it should be should be "exhaust the hot air out" of the case. But anyway, you can reverse it.

Yeah, finally i can put that PSU air duct ( for psu heat to other place ). Last time i put, the PSU switch block, now cut off abit can put XD. Now still testing is it got help. Happy~

Does the side patent fan really helps alot?

i think it will be very helpful to blow in, especially when we are using a gc that produce very hot temperature..
but the problem is, how to minimize the dust accumulated..

Normally the side fan that for exhaust GC card is quite near the GC because it easy exhaust out the hot air directly, for the big side fan maybe u can do for intake let more fresh air go in.



This post has been edited by vincent09: Jun 10 2007, 02:07 AM

at the end, all we have to do is trial & error, see which combination will gave us the best temp result

Basically it depend o the the type of case airflow or ur graphic card cooler ...

if it's blower type that exhaust hot air though rear end then it would be better for side patent fan to intake cool air... so that it has more cool air to cool off the gc.. since the blower would responsible to exhaust the hot air out from the case ...

if it's standard cooler that blow at the card then it depend on the overall difference of intake and exhaust of entire case..

if lack of intake then set side patent fan for intake ..

if lack of exhaust then make the side patent fan exhaust...

i hav a question here.. wer can i find those bezel like in dis.. thanks


source from http://www.lian-li.com

I think lian li do have them for sale as well but not sure ATE have them or not. Maybe you can ask them. Else, i know uncle ianho do customize them by cutting holes on the original lian li bezel..

thanks man.. will hunt from ATE..

Basically they don't sell this type of bezel yet as it's not in Lian Li manufacturing list for accessory yet.

But you could still ask them to custom order for you ....

Anyway My New PC Lian Li PC-A05

For quicker view of all the photos plz click Here




















Comments are welcomed

This post has been edited by Doom: Jun 10 2007, 10:41 PM