can overclock e6600 ES?? planning to pair it with G33 mobo gigabyte g33m-ds2r..

Any ES procs can be overclocked...but on how far you can OC it depends on other hardware as well. On general...3Ghz should be easily obtainable.

Perhaps you might wanna list out the other hardwares as well.

---

Added on November 8, 2007, 12:05 pmList your hardwares eg mobo, PSU, ram...etc etc. E6600 could do 3.2ghz easily. Not all e6600 are voltage friendly. 1.4v cannot...then try 1.45v or 1.5v but do not exceed 1.55v with air cooling.

This post has been edited by extremeocer: Nov 8 2007, 12:05 PM

Extremeocer, seems like ur E6600 has high oc potential, what u can get at best for air cooled?

The gradient of the graph of the voltage needed to OC increases dramatically as the clock speed increases...

guys i cant overclock my cpu anymore..ever since i changed my graphics card to 8800gtx..everytime i try to overclock my pc just wont start up..im using silverstone strider st56f 560w...not enough power?

probably.

CKC, what is ur mobo? afaik, 560W strider should be enuf for any high end single card now.

guys.. i check my box.. and my fpo/batch number is different from the 1st post
mine is 3719A113

have u try update BIOS?
maybe there is minor bug made u unable to OC ur rig


so, what ur point?


yepp, i agree
it should be enuff power even can feed the hd2900xt(the only GC i know required pcie 8pin + 6pin)


ok fine
does u encounter any problem(s)?

I don't think it is your PSU problem , can you list out your rig spec ???

newbie need help and advise .

me using e6600 and Asus P5e board . TWIN2X2048-5400C4 PC2-5400 2GB Kit 4-4-4-12 . Xigmatek HDTS 1283 cpu cooler

what is the recommend OC speed , FSB , multiplier, Vcore for my spec ?

i need a better performance when in games dont need extreme .

if can jus advise me to change FSB and Multiplier only coz i am noob lol. where to change vcore also donno .

thx

try 356x9 3.2ghz.. dont exceed 1.5vcore would be better, owes check your temp after you add vcore.
use coretemp to measure it.

no need change vcore, e6600 at default mostly able to hit 3.2Ghz
just change configuration at BIOS 400Mhz x8, the rest leave at default

yea.. default should easily achieve 3.2ghz.. but go higher should not exceed 1.5vcore.

4ghz need 1.56v for me...

1.56vcore what is the idle temp?

nice, ehh
if only my previous e6600 can do that, sure i aint sell mine

btw, what the week of ur chip?

=.=" 4ghz with 1.56vcore is a gem !
the temp is ?

Idle around 48C... load around 59C... 1.56v not really stable cuz the voltage drop when loaded... i pumped it to 1.58v can orthos but failed prime... don't dare to pump further cuz air cooled and load temperature reaching 60...

This post has been edited by IcEMoCHa: Dec 19 2007, 02:09 PM

quite good result already.. even i try 1.55vcore can't boot at 3.8ghz