gv more detail la bro bout ur setup n wat u have done..easier for others to help u

Installed AC Freezer Pro 7 and running Orthos at a steady temp of 63-65c (non-AC room) and side panel opened. No its time to go 3.6!

damn! kewL result there, wish mine can do the same but unable.. might limits by cheapo RAM
congratss..

Thanks! Heres the 3Dmark06 score....i know urs is 13k...quaddies power...huhu. RAM now cheap2 la.

nice score u hv there maranello55... mine cannot go 3.6ghz perhaps due to my cheap value ram... about time change better ram. anyway, wats ur temp on load? & does it orthos stable?

Thank you mate. RAM now cheap2 ma....after do bench can throw for sale at da garage sales hoho.
My temp on lead never go higher than 65c thanks to my ACPro7 . Orthos damn stable after 2 hours...but i should do more than that i think....24 hours issit?

guys, i wonder is there mod for e6600 such pin mod for q6600

need to clock abit coz e6600 at stock still slow, i used OEM pc, so no OC option in bios

normally i orthos stress 4 24hrs... . d highest speed i can get stable was 3.5ghz. & 4 d RAM..... probably i will buy crucial. Anyway.... i sold my E6600 oredi & no PC 2 play2 now.....

Hehe..i can see the voltage is very high 1.4v something on your cpu core.. Your temperature has no problem during full load? btw...i like your HD3870 score a whopping 12k with a little overclocking on it. =)

guys any one have ab9 motherboard???

cuz i have this troubles that im using ab9 and core duo 2 e6600, with ocz reaper 800mhz 2gb kit.

and den last time im using value ram and oC my proc 2,4mhz to 3.1mhz and den im using the reaper ram, i only ocz 2.5mhz and cannot go further more? can any1 notify this error?

haha ur proc speed shud b 2.4mhz to 3.1mhz 2.4ghz to 3.1ghz btw myb u can gv more details bout ur oc..such vcore,vNB n so on wat u hv did when oc

well by default is wat i forget d. im using the GURU program. and i follow the the TURBO mode vcore, and blabla. well im in the office. will get the exact how much i had set for it.

haha thx is not mzh is ghz

my e6600 running at 3.6ghz using Team Elite 4gig kits and gigabyte P35-DS3L.

Can oc higher if change the ram?

Thanks

mine at 3.15GHz stuck witht the ram (667), but it only able t be stable on 1.5vcore.

When I was using kingston 677 value ram, my pc running 3.4 without any problem. When I upgrade to team elite, I was hoping will oc much higher but just .1 higher.

Another thing, I set my voltage to Auto in my bios and stable at 1.35v and temp just 55c full load.

Something wrong with my setting or cpu? temperature so high one...




Idling 51-53C

E6600, Gigabyte P35-DS3R, HyperTX cooling.

U still go that result only using 500Watt Powerlogic PSU? Thumbs up for that.

remount the cooler. make sure thermal paste reapplied.

btw, hyperTX is not known for good heatsink

forgot to post my result since last year,

previously i run it 24/7 wv 333*9, vcore is 1.25, ram is 667 running 1:1 ratio, the rest setting is AUTO

after i change to Crucial Ballistix (800mhz) den hand GATAL liao, den push n push it stable @ 361*9 while vcore is 1.325 n running 4:5 ratio

both setting oso stess using ORTOS(6hours) n OCCT(2hours) n pass, too bad no print screen now, post later

still trying to reach 400*9 or 500*8,

This post has been edited by TSY: Apr 28 2008, 02:26 PM

ive goodled up and it seems my batch should be a good batch.Anyway,right now im running my e6600 at 3.375 ghz (1.535 vcore).try to increase the fsb with the same vcore but orthos failed.Any suggestion/possible solution?