1/100 barbatos PO at gwing rm80 and 1/144 barbatos for rm35?

Banshee Ver. Ka only the V-fin/horn is different from Unicorn, the rest of the body including the neck is the same as Unicorn

weapons sold separately
though for rm35 I'm a lil bit concern that it might be the same size as F91

oh yeah forgot about that
but looking at the picture they might be doing the same

This post has been edited by D-y: Jul 25 2015, 12:14 AM

Here my final look for Custom Tryon havent apply flat top coat

P7241205 by Jackie Loi, on Flickr

I almost tot they will use the Metal Composite color where orange will be darker and the blue will has a little shine judging by their earlier preview
but the final product seems to use back the MG color scheme
The blue is alright, but the light orange is not

Comparing this with Composite, the composite color is more fierceful



This post has been edited by TheEvilMan: Jul 25 2015, 11:22 AM

he claim that he spray a layer of urathane clear coat (apa ni??) then clear green then another layer of urathane clear coat

Polyurethane is usually used as furniture protectant.

does this allow smoother painting similar to applying a layer of primer before painting (primer don't work on clear part since it will overlap the transparency right?)

I did experiment on the extra clear parts of my MG Unicorn with clear blue, spraying lightly directly, I did get some purple but it does not cover the surface evenly and also overspray would destroy the transparency too.

I end up giving up on my Custom MG Unicorn color after failing to change the color of psycho frame

This post has been edited by TheEvilMan: Jul 25 2015, 12:53 PM

nice

Jackie, try take the photo with 2light source another from the bottom corner to let your kit stand out a bit more.

just finished my Megasize Age-1 . Dat size

Damn, that's nice!

anyone know how painted Beam sabers should look like? trying to paint the solid white saber red/pink with some white in between but google not showing much how they should be painted.

if you meant solid plastic beam sabers.. just use clear colors... or u mean gradient effect painting?

if those transparent than can flex, may need to prime it n then paint... but if u flex/bend a painted part, it can crack or chip the paint...

solid plastic to make it look like in the show, some white in the middle of the blade to make it look like lighting up, i don't think people use transparent or metallic paint, just normal red/pink/white.

check this blog entry

http://mxgs.blogspot.com/2010/04/two-tone-...need-bosny.html

i want to know how a painted saber should look like, can't find much reference online, most painted kits don't show their sabers.

https://playevolution.wordpress.com/2012/01...ng-zero-custom/
https://hamstercorp.wordpress.com/2012/06/1...mashii-banshee/

https://www.youtube.com/watch?v=9B9cct0cx4k

it was done with airbrush gradient
set the low psi and you are done

example pic

got example for solid sabers? straight round type. that banshee one is not a good example.