Welcome Guest ( Log In | Register )

Bump Topic Topic Closed RSS Feed
37 Pages « < 20 21 22 23 24 > » Bottom

Outline · [ Standard ] · Linear+

 The SSD Thread V5, Solid State Drive

views
     
horns
post May 25 2016, 01:01 PM

\m/
*******
Senior Member
3,038 posts

Joined: Nov 2009
QUOTE(MaUi^ @ May 25 2016, 11:34 AM)
Yeah, I also bought license for 2 machine, one for my desktpo and one for my laptop. Used this on my laptop crappy kingston ssd now with 1.5G ram for cache, enough to speed things. For desktop, I enabled 6GB of ram cache 2nd level cache on my old SSD (Second drive). So both cache level are on for max performance.

Before this, been thinking to upgrade to a PCIE SSD, but H97(or Z97) chipset have limited PCIE bus lane. This solution are another workaround and save me quite a lot, and with better result.
*
depending on usage, it could be a better option if the ram cache is sufficient. i do the same to my pcie ssd also.


horns
post May 26 2016, 12:36 AM

\m/
*******
Senior Member
3,038 posts

Joined: Nov 2009
QUOTE(g104 @ May 25 2016, 10:05 PM)
boss, did u received "The stub received bad data" randomly like during u launch any shortcuts at desktop? i think it related to EMET 5.5

run scannow, checkhealth, scanhealth etc no issue. HDD or SSD sign of failure?
*
No bro i never had this message before. I run emet 5.5 too, with max security settings.

I'm not sure of the real cause.
horns
post Jun 8 2016, 07:08 PM

\m/
*******
Senior Member
3,038 posts

Joined: Nov 2009
QUOTE(raynman @ Jun 8 2016, 06:38 PM)
I am a noob in SSDs, so please bear with me.

I just bought my first entry-level SSD, the Samsung 850 EVO 120GB, for use as a boot drive.

I cloned my existing C drive to the 850 EVO using the supplied Samsung Data Migration tool.

Everything went well, and the SSD booted up in less than 10 seconds to the Windows desktop.

I am using an old ASUS P6TD Deluxe motherboard with an i7 920 processor, 6 SATA2 ports and 11 GB of triple-channel RAM.

My question is ....

Is it OK to install the Samsung Magician software and enable RapidMode?

Will I see any appreciable difference between non-RapidMode and RapidMode?

Will it take up too much of my precious RAM?

Currently I am not using any paging file for virtual memory, so everything uses RAM.
*
samsung 850 evo is a mainstream ssd. samsung 750 evo is entry-level.

yeah it's ok to enable rapid mode. appreciable difference depends on usage. if it's for common usage, not really. if your ram is precious, you can just turn rapid mode off. i suggest only turn it on if you have at least 12gb of system ram. i only turn it on when i have at least 16gb. (i don't use pagefile also)
horns
post Jun 8 2016, 07:49 PM

\m/
*******
Senior Member
3,038 posts

Joined: Nov 2009
QUOTE(raynman @ Jun 8 2016, 07:16 PM)
Thanks for your advice.

I think there is no harm in enabling RapidMode and give it a spin.

If there is any negative effect on the system, I can disable it.

I'll see how it goes .....
*
right smile.gif tbh if system ram is sufficient, you will not have any negative effects.
horns
post Jun 9 2016, 12:57 AM

\m/
*******
Senior Member
3,038 posts

Joined: Nov 2009
QUOTE(raynman @ Jun 8 2016, 07:57 PM)
I enabled RapidMode and CrystalDiskMark figures just shot through the roof!

Are those figures believable? biggrin.gif
*
it's ram of course it's that fast hehe
horns
post Jun 11 2016, 11:33 AM

\m/
*******
Senior Member
3,038 posts

Joined: Nov 2009
Sandisk SSD Dashboard 1.4.2

http://kb.sandisk.com/app/answers/detail/a...ort-information

Release notes: http://kb.sandisk.com/app/answers/detail/a_id/15576

SanDisk SSD Dashboard software: version 1.4.2, release date: April 4, 2016
New changes since version 1.4.1:
- Fixed bugs related to user interface malfunctions
- Updated S.M.A.R.T. attributes list and values
- Improve the Status Screen information display
- Added support for automatic firmware update on additional SanDisk SSDs

Known Issues:
- Cannot perform firmware update/Secure Erase/Crypto Erase or Sanitize using USB bootable drive if the drive is ULTRA II, X400, or Z400s
- Cannot perform firmware update using USB bootable drive if the drive is connecting to certain USB/SATA adaptor cables
- Cannot detect multiple drives if they are connected to a Silicon Image PCI(e) SATA controller card
- Cannot detect drives if they are connected to a Marvell controller and configured as RAID
- The unsubscribe URL provided at the bottom of all text message alerts (when in the Danish language) that uses the Verizon gateway will have two periods in it; therefore, clicking this will correctly indicate that it is an invalid URL. As a work around, copy the URL, paste it into your browser, edit it by removing the extra period, and submit it. Alternately, open the SanDisk Dashboard, and unsubscribe within it.

horns
post Jun 13 2016, 04:11 PM

\m/
*******
Senior Member
3,038 posts

Joined: Nov 2009
QUOTE(AlexisStarZ @ Jun 12 2016, 10:39 PM)
thinking which ssd to get for my desktop
currently my laptop using samsung evo 850, so far so good, which using v-nand technology

currently eyeing on kingston uv400 and samsung evo 850 for my desktop, for kingston uv400 it using TLC controller, meanwhile samsung evo 850 using v-nand controller
both price difference around RM 180 as I am decided to get 240 / 250gb
kingston UV400 price is around RM 250, as for samsung evo 850 price around RM 430

I read some article regarding TLC controller might have shorter life span which make me worry, anybody can icon_question.gif
don't know that extra RM 180 worth or not (extra 2 years warranty, slightly faster) and better controller which using v-nand ??
*
it all depends on your budgets. if it's for common usage, entry-level ssd like uv400 should be good enough. i personally will go for 850 evo because of longer warranty period. (have tested m.2 sata variant of 850 evo; not bad)

as for its shelf life, don't worry about it. i have 2x old 840 evo 500gb (planar tlc). after a few years' use (close to 3 years), the tbw is currently about 2tb only (the laptop is used for programming and compiling; running virtual machines. however i do use primocache with deferred writes on).



horns
post Jun 13 2016, 11:55 PM

\m/
*******
Senior Member
3,038 posts

Joined: Nov 2009
QUOTE(AlexisStarZ @ Jun 13 2016, 09:55 PM)
what is tbw ??
still confusing either get UV400 evo 850
both r/w speed almost the same, just worried about its life span rclxub.gif

*
tbw is 'total bytes written', a guaranteed limit of the amount of data to be written (and get erased) to ssd within valid warranty period.

another measurement for endurance is wpd, or 'drive writes per day', e.g. for a ssd with a capacity of 480gb, 1 wpd means the ssd is guaranteed so that it can be written 480gb of data everyday without fail, within warranty period. my old samsung sm843t 480gb has a random terabytes written endurance of 2wpd for 5 years, which means it can be written 2x 480gb (its sequential terabytes written endurance is 11 wpd for 5 years) it's an enterprise drive built to last (and expensive). seriously you don't need it.

all in all, just don't worry about the lifespan. with proper use, you will not exceed even the consumer ssd limit for many years. (don't use it for torrents; hdd is good enough for that)
horns
post Jun 14 2016, 12:29 AM

\m/
*******
Senior Member
3,038 posts

Joined: Nov 2009
QUOTE(AlexisStarZ @ Jun 14 2016, 12:17 AM)
oo, but just wondering is it worth to pay extra around RM 180 for that samsung evo 850 rclxub.gif
what are the benefit for that evo 850 better than kingston uv400 ?
except using v nand technology and more 2 years warranty rclxub.gif
btw does that kingston uv400 got something like rapid mode like what samsung evo ssd offering laugh.gif
*
personally i think it's worth it to pay myr 90 per year for the additional warranty; plus you can run rapid mode (free ram caching with magician; if you have extra system ram to do this).

kingston ssd tool doesn't provide ram caching afaik.

it's just my personal preference. if you don't need long warranty or ram cache, you probably can just save 180 and go for uv400.
horns
post Jun 14 2016, 04:10 PM

\m/
*******
Senior Member
3,038 posts

Joined: Nov 2009
QUOTE(Joey Christensen @ Jun 14 2016, 03:36 PM)
I've just bought a new Kingston’s SSDNow UV400 (SUV400S37/240G)as a replacement of the HDD in my ASUS lappie. This serves as a litmus test for me for future reference. I've observed the Windows boot time / shut down are under 10 seconds (approx. 6 seconds).

My comments are: Price is OK-ish with THREE (3) years warranty, performance is alrighty and let's see how it hauls in the long run. Overall, satisfying a-OK.

Any advice on what to do after getting an SSD installed? I've just put it OFF on defragmentation of files on the drive option.
*
nice smile.gif

check the first page for ssd optimization. disable only things that you think you don't need. for new os like w10 a lot of things have been taken care of automatically, including the part in optimize drives dialog (ssd will be detected as ssd and defragmentation will be replaced by issuing trim command instead)
horns
post Jun 14 2016, 04:40 PM

\m/
*******
Senior Member
3,038 posts

Joined: Nov 2009
QUOTE(Joey Christensen @ Jun 14 2016, 04:20 PM)
Yeah, I think it's OPTIMISATION instead of DEFRAGMENTATION. Windows 10 has improved management features for SSD and it's a blessing indeed.

I'm still looking forward to removing some of the unnecessary stuff that comes with Windows 10. Maybe slap in 16GB RAM in my lappie as the next step (currently at 8GB of RAM)?  laugh.gif

By the way, I nearly taken home the Sandisk Extreme II but they ran out of stock.  sweat.gif
*
If it's for optimizing ssd in optimize drives dialog, you dont need to turn it off.

Yes i remove most apps in w10 too, and i turn off the background thing is settings. Never click on any of them before. Extra ram is always a good thing smile.gif

Sandisk extreme ii is also a good chocie. Honestly, as long as it's normal computing, these mainstream drives will work well smile.gif
horns
post Jun 15 2016, 12:13 AM

\m/
*******
Senior Member
3,038 posts

Joined: Nov 2009
QUOTE(Joey Christensen @ Jun 14 2016, 08:39 PM)
I've checked last BIOS time and it stated 2.6 seconds. Does this mean the windows boot up time is just mere 2.6 seconds? If that is true, I'll be damned.
*
yeah with fastboot on, it's that fast. i am ok without it.

QUOTE(AlexisStarZ @ Jun 14 2016, 09:48 PM)
haha personally both my laptop and desktop are using 8gb ram only
yet, desktop is running haswell i5, not support dd4 ram cry.gif
as for laptop, running skylake i5 but running ddr3l ram cry.gif

guess will go for kingston as if I buy new desktop straight away put in ssd, lazy to add on later, a lot things need to backup cry.gif

*
as long as it's sufficient 8gb is fine. however i think the current optimal is 16gb. software do make use of ram to enhance much better user experience.
horns
post Jun 15 2016, 10:07 PM

\m/
*******
Senior Member
3,038 posts

Joined: Nov 2009
QUOTE(AlexisStarZ @ Jun 15 2016, 09:32 PM)
if not enough then only add on bah
but right now my desktop are eating dust unless gaming laugh.gif
*
Yeah it's better to invest it if you use it frequently smile.gif

imo the optimal system setup for current personal computing consists of:

1. 1x sata ssd, at least 240gb;
2. 1x hdd (mainly for data storage);
3. 16gb ram.

This setup is affordable these days. You can use it for quite some time for normal use. When it gets too old, just convert it to storage server at home.
horns
post Jun 16 2016, 11:55 PM

\m/
*******
Senior Member
3,038 posts

Joined: Nov 2009
QUOTE(AlexisStarZ @ Jun 16 2016, 09:27 PM)
ya but I am not a heavy user
8gb ram is enough for me
and definitely will convert it into NAS when not using it laugh.gif
*
right smile.gif if you are going to use freenas, the recommended minimum is 16gb ram. (bare minimum is 8gb)

QUOTE(drunkonpiss @ Jun 16 2016, 09:45 PM)
Guys, anyone have tried to transfer their OS from HDD to SSD? Kinda complicated but is there a possibility?
*
yeah i tried on transcend and samsung ssds with their migration tools. they're pretty straight forward. i did defrag and then resize the os partition to fit into the ssd before the migration.
horns
post Jun 21 2016, 01:13 AM

\m/
*******
Senior Member
3,038 posts

Joined: Nov 2009
QUOTE(comingsoon87 @ Jun 20 2016, 01:58 PM)
Hi, newbie here. I got a Kingston Hyper X Savage 480gb. Trying to boot in win7 ultimate 10x times. Blue screen appear everytime finished boot.

1) ssd firmware updated.
2) bios AHCI set.
3) tried boot to HDD with the same DVD, no problem.
4) change sata3 and power cable.

Any way else to test? Thanks.

Mobo: Asus x99-A
SSD: Kingston HyperX savage 480gb
Intel: i7-5820k
*
try use intel sata port. by right there is nothing to do except what you have done and connect it to intel sata port for better performance. (that's what i remembered when i did clean install with w7 usb stick, both in legacy and uefi mode)

to test like others said just use it as storage drive and see if it's detected. btw what's the error message / code? also, maybe try update bios just in case.
horns
post Jun 21 2016, 05:35 PM

\m/
*******
Senior Member
3,038 posts

Joined: Nov 2009
QUOTE(comingsoon87 @ Jun 21 2016, 12:00 PM)
Thanks bro, I reset my bios to original and run window as normal then it works nows. Run for 6 hrs yesterday night that no blue screen.

Also, set my ssd sata3 port to my mobo sata 0 port and single power cable only for my SSD. Do all this in 1 round. So, dont know which made it works. HAHAHA!

Thanks a million here.
*
hehe ok as long it's working smile.gif


horns
post Jun 21 2016, 05:41 PM

\m/
*******
Senior Member
3,038 posts

Joined: Nov 2009
Micron Storage Executive Version 3.30.022016.10

https://www.micron.com/products/solid-state...cutive-software

This software allows you to update the firmware of the SSD Micron, view useful information about the system (physical memory/virtual available, OS, IP address, etc.), view details of SSD (total capacity/available model, serial number, interface type, firmware, driver, health, etc.).

To consult SMART monitoring data, erasing the SSD (Sanitize) or remove the encryption keys (PSID Revert). This software uses a web interface but can also be executed in the command line interface (msecli.exe).

Supported OS: Windows 7, Windows 8, Windows 8.1, Windows 10 - 32/64 bit.

Software Storage Executive (SE) supported Solid-State Drive (SSD) Micron:

Micron 1100 256 Mo (MTFDDAK256TBN), 1100 256 Mo (MTFDDAV256TBN), 1100 512 Mo (MTFDDAK512TBN), 1100 512 Mo (MTFDDAV512TBN), 1100 1 To (MTFDDAK1T0TBN), 1100 1 To (MTFDDAV1T0TBN), 1100 2 To (MTFDDAK2T0TBN), 2100, 7100 400 Go (MTFDHAK400MCG), 7100 400 Go (MTFDHBG400MCG), 7100 480 Go (MTFDHAK480MCH), 7100 480 Go (MTFDHBG480MCH), 7100 800 Go (MTFDHAK800MCG), 7100 800 Go (MTFDHBG800MCG), 7100 960 Go (MTFDHAK960MCH), 7100 960 Go (MTFDHBG960MCH), 7100 1600 Go (MTFDHAK1T6MCG), 7100 1920 Go (MTFDHAK1T9MCH), 9100 800 Go (MTFDHAL800MCE), 9100 800 Go (MTFDHAX800MCE), 9100 1200 Go (MTFDHAL1T2MCF), 9100 1200 Go (MTFDHAX1T2MCF), 9100 1600 Go (MTFDHAL1T6MCE), 9100 1600 Go (MTFDHAX1T6MCE), 9100 2400 Go (MTFDHAL2T4MCF), 9100 2400 Go (MTFDHAX2T4MCF), 9100 3200 Go (MTFDHAL3T2MCE), 9100 3200 Go (MTFDHAX3T2MCE), M500 2.5" 120 Go (MTFDDAK120MAV-1AE), M500 2.5" 240 Go (MTFDDAK240MAV-1AE), M500 2.5" 480 Go (MTFDDAK480MAV-1AE), M500 2.5" 960 Go (MTFDDAK960MAV-1AE), M500 mSATA 120 Go (MTFDDAT120MAV-1AE), M500 mSATA 240 Go (MTFDDAT240MAV-1AE), M500 mSATA 480 Go (MTFDDAT480MAV-1AE), M500 M.2 120 Go (MTFDDAV120MAV-1AE), M500 M.2 240 Go (MTFDDAV240MAV-1AE), M500 M.2 480 Go (MTFDDAV480MAV-1AE), M500DC 1.8" 120 Go (MTFDDAA120MBB-2AE1), M500DC 1.8" 240 Go (MTFDDAA240MBB-2AE1), M500DC 1.8" 480 Go (MTFDDAA480MBB-2AE1), M500DC 1.8" 800 Go (MTFDDAA800MBB-2AE1), M500DC 2.5" 120 Go (MTFDDAK120MBB-1AE1), M500DC 2.5" 240 Go (MTFDDAK240MBB-1AE1), M500DC 2.5" 480 Go (MTFDDAK480MBB-1AE1), M500DC 2.5" 800 Go (MTFDDAK800MBB-1AE1), M500IT 2.5" 60 Go (MTFDDAK060MBD), M500IT 2.5" 120 Go (MTFDDAK120MBD), M500IT 2.5" 240 Go (MTFDDAK240MBD), M500IT mSATA 60 Go (MTFDDAT060MBD), M500IT mSATA 120 Go (MTFDDAT120MBD), M500IT mSATA 240 Go (MTFDDAT240MBD), M510 2.5" 128 Go (MTFDDAK128MAZ-1AE12), M510 2.5" 128 Go (MTFDDAK128MAZ-1AE1Z), M510 2.5" 256 Go (MTFDDAK256MAZ-1AE12), M510 2.5" 256 Go (MTFDDAK256MAZ-1AE1Z), M510 mSATA 128 Go (MTFDDAT128MAZ-1AE12), M510 mSATA 128 Go (MTFDDAT128MAZ-1AE1Z), M510 mSATA 256 Go (MTFDDAT256MAZ-1AE12), M510 mSATA 256 Go (MTFDDAT256MAZ-1AE1Z), M510 M.2 128 Go (MTFDDAV128MAZ-1AE12), M510 M.2 128 Go (MTFDDAV128MAZ-1AE1Z), M510 M.2 256 Go (MTFDDAV256MAZ-1AE12), M510DC 2.5" 120 Go (MTFDDAK120MBP-1AN1ZABYY), M510DC 2.5" 240 Go (MTFDDAK240MBP-1AN1ZABYY), M510DC 2.5" 480 Go (MTFDDAK480MBP-1AN1ZABYY), M510DC 2.5" 800 Go (MTFDDAK800MBP-1AN1ZABYY), M510DC 2.5" 960 Go (MTFDDAK960MBP-1AN1ZABYY), M510DC 2.5" TCG Enterprise 120 Go (MTFDDAK120MBP-1AN16ABYY), M510DC 2.5" TCG Enterprise 240 Go (MTFDDAK240MBP-1AN16ABYY), M510DC 2.5" TCG Enterprise 480 Go (MTFDDAK480MBP-1AN16ABYY), M510DC 2.5" TCG Enterprise 800 Go (MTFDDAK800MBP-1AN16ABYY), M510DC 2.5" TCG Enterprise 960 Go (MTFDDAK960MBP-1AN16ABYY), M550 2.5" 64 Go (MTFDDAK064MAY-1AH12), M550 2.5" 64 Go (MTFDDAK064MAY-1AH1Z), M550 2.5" 128 Go (MTFDDAK128MAY-1AH12), M550 2.5" 128 Go (MTFDDAK128MAY-1AH1Z), M550 2.5" 256 Go (MTFDDAK256MAY-1AH12), M550 2.5" 256 Go (MTFDDAK256MAY-1AH1Z), M550 2.5" 512 Go (MTFDDAK512MAY-1AE12), M550 2.5" 512 Go (MTFDDAK512MAY-1AE1Z), M550 2.5" 1 To (MTFDDAK1T0MAY-1AE1Z), M550 2.5" 1 To (MTFDDAK1T0MAY-1AE12), M550 mSATA 64 Go (MTFDDAT064MAY-1AH12), M550 mSATA 64 Go (MTFDDAT064MAY-1AH1Z), M550 mSATA 128 Go (MTFDDAT128MAY-1AH1Z), M550 mSATA 128 Go (MTFDDAT128MAY-1AH12), M550 mSATA 256 Go (MTFDDAT256MAY-1AH12), M550 mSATA 256 Go (MTFDDAT256MAY-1AH1Z), M550 mSATA 512 Go (MTFDDAT512MAY-1AE12), M550 mSATA 512 Go (MTFDDAT512MAY-1AE1Z), M550 M.2 64 Go (MTFDDAV064MAY-1AH12), M550 M.2 64 Go (MTFDDAV064MAY-1AH1Z), M550 M.2 128 Go (MTFDDAV128MAY-1AH12), M550 M.2 128 Go (MTFDDAV128MAY-1AH1Z), M550 M.2 256 Go (MTFDDAV256MAY-1AH12), M550 M.2 256 Go (MTFDDAV256MAY-1AH1Z), M550 M.2 512 Go (MTFDDAV128MAY-1AH12), M550 M.2 512 Go (MTFDDAV512MAY-1AE1Z), M600 2.5" 128 Go (MTFDDAK128MBF-1AN12), M600 2.5" 128 Go (MTFDDAK128MBF-1AN1Z), M600 2.5" 256 Go (MTFDDAK256MBF-1AN12), M600 2.5" 256 Go (MTFDDAK256MBF-1AN1Z), M600 2.5" 512 Go (MTFDDAK512MBF-1AN12), M600 2.5" 512 Go (MTFDDAK512MBF-1AN1Z), M600 2.5" 1 To (MTFDDAK1T0MBF-1AN12), M600 2.5" 1 To (MTFDDAK1T0MBF-1AN1Z), M600 mSATA 128 Go (MTFDDAT128MBF-1AN12), M600 mSATA 128 Go (MTFDDAT128MBF-1AN1Z), M600 mSATA 256 Go (MTFDDAT256MBF-1AN12), M600 mSATA 256 Go (MTFDDAT256MBF-1AN1Z), M600 mSATA 512 Go (MTFDDAT512MBF-1AN12), M600 mSATA 512 Go (MTFDDAT512MBF-1AN1Z), M600 M.2 2260 128 Go (MTFDDAY128MBF-1AN12), M600 M.2 2260 128 Go (MTFDDAY128MBF-1AN1Z), M600 M.2 2260 256 Go (MTFDDAY256MBF-1AN12), M600 M.2 2260 256 Go (MTFDDAY256MBF-1AN1Z), M600 M.2 2260 512 Go (MTFDDAY512MBF-1AN12), M600 M.2 2260 512 Go (MTFDDAY512MBF-1AN1Z), M600 M.2 2280 128 Go (MTFDDAV128MBF-1AN12), M600 M.2 2280 128 Go (MTFDDAV128MBF-1AN1Z), M600 M.2 2280 256 Go (MTFDDAV256MBF-1AN12), M600 M.2 2280 256 Go (MTFDDAV256MBF-1AN1Z), M600 M.2 2280 512 Go (MTFDDAV512MBF-1AN12), M600 M.2 2280 512 Go (MTFDDAV512MBF-1AN1Z), P400m 2.5" 100 Go (MTFDDAK100MAN-1S1AA), P400m 2.5" 200 Go (MTFDDAK200MAN-1S1AA), P400m 2.5" 400 Go (MTFDDAK400MAN-1S1AA), S610DC 1920 Go (MTFDJAL1T9MBU), S610DC 3840 Go (MTFDJAL3T8MBU), S630DC 2.5" 7 mm 400 Go (MTFDJAK400MBT), S630DC 2.5" 7 mm 480 Go (MTFDJAK480MBT), S630DC 2.5" 7 mm 800 Go (MTFDJAK800MBT), S630DC 2.5" 7 mm 960 Go (MTFDJAK960MBT), S630DC 2.5" 15 mm 1600 Go (MTFDJAL1T6MBT), S630DC 2.5" 15 mm 1920 Go (MTFDJAL1T9MBT), S630DC 2.5" 15 mm 3200 Go (MTFDJAL3T2MBT), S630DC 2.5" 15 mm 3840 Go (MTFDJAL3T8MBT), S650DC 1.8" 400 Go (MTFDJAA400MBS), S650DC 1.8" 800 Go (MTFDJAA800MBS), S650DC 2.5" 7 mm 400 Go (MTFDJAK400MBS), S650DC 2.5" 7 mm 800 Go (MTFDJAK800MBS), S650DC 2.5" 15 mm 1600 Go (MTFDJAL1T6MBS), S650DC 2.5" 15 mm 3200 Go (MTFDJAL3T2MBS), S655DC 2.5" 200 Go (MTFDJAK200MBW) et S655DC 2.5" 400 Go (MTFDJAK400MBW).

horns
post Jun 25 2016, 01:54 AM

\m/
*******
Senior Member
3,038 posts

Joined: Nov 2009
Intel Solid State Drive (SSD) Toolbox 3.3.6

https://downloadmirror.intel.com/26085/eng/...lbox_v3_3_6.zip


There is a firmware update available for the Intel® SSD 540s, E 5400s Series and the Intel® SSD DC S3100 Series products. This release of the Intel® SSD Toolbox will detect if user’s drive is eligible for the firmware update and directs them to use the Intel® SSD Firmware Update Tool.
For the Intel® SSD 540s Series, the latest firmware revision is 031C.
For the Intel® SSD E 5400s Series, the latest firmware revision is 031E.
For the Intel® SSD DC S3100 Series, the latest firmware revision is 031D.
The following changes are included in the firmware update:
- Corrected SMART AAh, E8h, ABh, and ACh behavior
- Corrected DIPM enabled after COMRESET issue
- Corrected errant FIS causing BSOD when Write Cache disabled
- Corrected SATA NCQ Command Error log reporting issue
- Mitigated a security vulnerability which in some cases resulted in corruption of user’s data (see Intel Advisory INTEL-A
-00053).
horns
post Jun 25 2016, 02:01 AM

\m/
*******
Senior Member
3,038 posts

Joined: Nov 2009
QUOTE(DjK @ Jun 24 2016, 06:04 PM)
Hi guys,

Recently just purchased a Kingston Savage 480gb. my question is:

the SSD comes with Acronis True Image HD clone program but if i go to the download load page is a 2014 program. Is it advisable to use the most updated version 2016?

the SSD comes with a activation code for acronis true image. i don't know whether it can work with the 2016 version.

Side question: should i just forget about using acronis and instead use something like Macrium Reflect?

advise needed. appreciated. Thank you
*
it's better to do a fresh install of os.

to answer your question, unless the key can be used for the latest version, you should stick to 2014. macrium reflect is ok also.

QUOTE(p_cock01 @ Jun 24 2016, 09:12 PM)
hello everyone...one question my kingston savage cannot detect at bios..already try like change cable port and other else..is it true if swicth off computer not proper way can destroy ssd lifespan?coz i do it like 7 to 8 times..tq ya
*
not sure about your situation but sudden power loss might cause it to corrupt. that happened to me only once as external drive (mbr disk formatted with ntfs). i use diskpart > clean to clear everything. the ssd is still fine.
horns
post Jun 27 2016, 09:16 AM

\m/
*******
Senior Member
3,038 posts

Joined: Nov 2009
QUOTE(Ivangile @ Jun 27 2016, 03:00 AM)
Anyone has any idea if I should still buy msata SSD now?

I have 500gb samsung evo 850 for my operating system and programme, and a normal HDD for my data. I am wondering if I should buy 1tb SSD to replace the normal HDD or a 500gb msata? I think I am going to change my laptop in 1 or 2 years, and msata is going to be obsolete soon and I can't use the msata.
*
if you have the need now, yes. if not, for max compatibility, it's better to get 2.5" sata ssd. since the trend is m.2 form factors these days, msata is only useful for older models, so you might not be able to reuse it in new systems.

of course you can convert it to external storage later. however the problem might be to find a compatible enclosure for the purpose.

37 Pages « < 20 21 22 23 24 > » Top
Topic ClosedOptions
 

Change to:
| Lo-Fi Version
0.0274sec    0.27    7 queries    GZIP Disabled
Time is now: 12th December 2025 - 11:54 PM