Removed the hose, cleaned the old inside to remove any old sealant, then reapply new sealant.

Basically nothing changed just reassemble.

hello guys may i know how much is the spark plug for preve cfe ?
i heard its quite expensive.

i saw ard the front windscreen the black color part which suppose to be glue to hold the windscreen onto the body, but can see like hairline crack propagate all around the windscreen, i think is the glue itself being eroded by water... dunno will be worst or not..

Ok thanks for sharing the info i will go to SC and have them do this.

Hi guys, I'm considering to get preve exec.

-Is the fc that bad?
Some say good, while others say that it's horrific. The data in fuelly is kinda varied. Some 7km/l whereas some is as good as 13km/l if I'm not mistaken. Saga blm full tank can go max 300km (rare occasion). So anything better than this is good!

-Weight to power ratio? Any problems with steep roads?
I remember a popular post in LYN saying that preve exec couldn't climb up genting or steep hills and this worries me. I asked SA and it's only logical that the SA says it's not underpowered. Is this problem resolved?

Pick up?
- I use to drive a saga blm 1.3 and the pick up is quite bad. It's famed that proton is underpowered below the 3k rev. But I do pray someone here can tell me it's not the case for preve exec!

-Will it void warranty if I were to change the headunit? Some say cut wires = void but some say no problem. Mixed answered from prevec fb group.

I change mine for around 300.35 including gst excluding workmanship

Anyone else This Silicon Key Cover? Ready Stock. Sharing good thing with previans!!!!

https://forum.lowyat.net/index.php?act=ST&f...0#entry75178665

I'm driving preve manual exec, hope these could help u

-Is the fc that bad?
8km/l +- (town area, 50 50 heavy footer)

-Weight to power ratio? Any problems with steep roads?
No problem if you wanna exit junction or something on steep hills,
Genting touge? Definitely NONO, underpower (Weight to power ratio).

Pick up?
Could only feel the power kick in after 2k.

-Will it void warranty if I were to change the headunit? Some say cut wires = void but some say no problem
Based on my research, cutting wires for HU definitely void HU warranty.
Unless it is a plug and play unit, try ask EA Autoworks.

Above are solely based on my experience. Hopefully some sifu can correct me if i'm wrong.
Anyway, if you're the type which is "need4speed", pay extra and get CFE variant.

This post has been edited by LalaluSan: Jul 27 2015, 01:47 PM

Thanks for your reply. My replies r the underlined parts. I hope an executive auto user can shed some light as well

i can get the original plug for RM250 including gst etc etc.

Our car under warranty cannot buy outside i know its cheaper outside

hye..anybody do coating to your preve?

Preve paint no worth do coating, cos too thin. when times up just change a new painting. Unless u do wrapping, then it is ok. And the paint job is shit at some area, becos the paint havent fully dry they do clear coat already.

hi,
any prevoc active member or any technical members,
my preve in major problematic..
Please PM me.
Thank You

my dad bought a new honda jazz 2015, even they say honda cvt how good, how godlike also, and say how thrashy proton cvt is, i feel low speed similar characteristic with honda jazz too, like u press pedal until5-10km/h suddenly u release pedal will jerk abit or not smooth, it is the same. I heard the CVT whine too, just very quiet and the engine noise is very very low compare to proton. But compare CVT, more or less the same, except the whine is lower.

btw anyone know what is the size for the bulb for rear car plate?

This post has been edited by ben3003: Jul 28 2015, 11:43 AM

i start realize my car have minor "duk duk duk duk duk" sound when pressing the pedal, especially going up hill in low speed...
Oh my preve....

T10

thanks bro, how about brake light? also now i keep hearing brake metal screeching sound on my drive side front tyre, does it mean my brake start worn out already? around 35k km now..

This post has been edited by ben3003: Jul 28 2015, 02:34 PM

Where can I find the guides for the turbo hose mod? Googling doesn't help at all.

German sausage? If thats what you mean, you just need to open both of the hose, in and out, tie with cable tie and fix it back.. you can go wrong in doing it..