you want controller for what? i mean for hand wiring or for other oem boards like costar boards?

yisss!!!

yuktsi you need extra black screw?

Dear Sifus, is it possible to change the Costar Stabilizer from the Filco Majestouch 2 TKL to Cherry Stabilizer.

What stuffs I need? Do I need to change the Controller Chip too if I want to change the stabilizer?

Thanks!

First question, all the veterans will curious about..
Why you want to change it?

i tot everyone love costar.

1st, I like that feel of Cherry Stabilizer.
2nd, I don't know why the Shift buttons easily get pushed down to either sides if being pressed hard at the sides. It's perfectly OK and problemless if not pressed with super strong force at left or right side of the key.
See SPOILER IMAGE below...


Is it generally like that? Or is my unit spoiled? If so, I gonna RMA it?

This post has been edited by DarkSilver: Feb 23 2015, 05:55 PM

For hand wiring. You know where to get locally?

Can you pull the keycap out and show us the picture of the "inserts" to the wire costar stabilisers?
It looks like the Right Shift do not mount the inserts to the costar stab.
You are the first like genuine Cherry stab I see in here. Most like costar or clipped-cherry.

Edit: Probably the inserts not hook to the wire of costar stab. No need RMA ya

This post has been edited by quovadis123: Feb 23 2015, 06:32 PM

just got myself a k70 rgb, anyone here using it as well and have read the 140 page manual? hahaha

This post has been edited by insane.gamer: Feb 23 2015, 06:07 PM

costar stabs in general won't spoil unless you really cock up something big time.

also, if you wanna replace your costar with cherry, you need to buka lubang besar besar

locally i see only got 3.1.

have to source from outside if you want 2.0 like pjrc, adafruit

See spoiler images here...

The rest of the stuffs are fine, except the shift button here.
I repeat the same install procedure for every other keys a few times to confirm.
I don't know where or what went wrong...

This post has been edited by DarkSilver: Feb 23 2015, 06:36 PM

Actually I'm looking for image like this.


If the white color inserts hook properly to the wire like shown in the picture, your Right Shift key will be stabilized.
If not stabilized, mean not hook properly.

darksilver, the wire is perfectly fine in your picture.
The procedure are
1. mount the inserts to the keycap
2. hook the inserts to wire.

Image of inserts to keycap and hooked to wire is below for reference purpose (costar stabilisers, in alps keyboard).


This post has been edited by quovadis123: Feb 23 2015, 07:14 PM

So used to it that I no longer bother giving recommendations. We should have a disclaimer at the first post that says:

"If you are retarded enough not to listen to us, we are entitled to ignore your posts forever :3"

YESH. HYPERFUSE.

Patiently awaiting my GMK set.

Advice allows others to avoid painful mistakes that other people have already made.
"Listen to advice and accept discipline, and at the end you will be counted among the wise."

Smart man learn from own mistakes. Wise man learn from other's mistakes.

MKB thread become philosophy thread.

Ain't really working. I think it might be due to lack of grease? That's why the key got stuck when pressed heavy from the sides(one at a time).
I tried not to use the Stabilizer Wire, and the problem solved.
But, that'll mean not stable too...

Anyway, is Vortex MKB good?