ya, i'm using vista now...
really weird, initially need to increase vcore to 1.45v when overclocking, now even default vcore already can enter into window, and orthos for 8 hours stable.

rly?? wow.. looks like i dun have to change my mobo to use vista..
btw.. have u tried the latest rebel's haven bios???

u means the latest one which can support 1333FSB? Nope, I didn't flash it.

owh.. icic so this mobo got no issues with vista even with the previous bios...

ehh... u mean this mobo can oso support fsb 1333?... oni hav to update the bios?

Yes, after flash to the latest bios, this mobo can fully support 1333FSB processor, but it just have some overclocking issue only...

take a look here.

where can i find link or site on oc with this board?

thnx

ok done read Intel(R) Core(tm)2 Duo/Quad Overhauled Rev. 3
hrmm good start
but mebi sum1 can share their link with me

This post has been edited by pal33x: Sep 9 2007, 09:14 AM

you can find tips, and tricks at this forum
click this -> Rebels haven computer forum

anyone have issue regarding on temperature reading after updated to the latest bios?

after i updated to the latest bios,
the ultilities like fan controller, hardware monitor and etc tat bundle with the installation cd are not able to install anymore,

actually, dun use utilities bundled with the mobo coz they sark...
instead try everest which works perfectly with this mobo

ok, will get the software later....
recently are loads with assignment,
wana oc my rig also not free

link is dead

btw why i cant boot other than 333 and 400 fsb?
like 400x8 and x9 is ok (see my sig for rig setup)
but 425x8 will reset to 266
333~400 oso cant boot

btw noob question here
how to set 1t and 2t?
44412 and 55515kah?

btw why i cant boot other than 333 and 400 fsb?
like 400x8 and x9 is ok (see my sig for rig setup)
but 425x8 will reset to 266
333~400 oso cant boot


my mobo are better than u,
the highest i can go is 360 x 9,
but wont pass orthos test in windows

if using multiplier 8,
mine clock can go further than 420...

try this -> http://www.rebelshavenforum.com
and yes u can change the command rate only if u flashed the latest bios

Anyone tried the pencil mod to up the vdimm on the 965PT?

haha i dont have the heart to do hard modding yet.. why dun u try 1st then show us the result

i definitely wud if i have a DMM..

guys looks like a have a prob...
im using team elite ddr2 800 5-5-5-16..
but i seem to cannot reach 450mhz fsb no matter what i do...
but i and my fren already tested my ram and it can do 1.15gig @ 2.25v vdimm but using 3:5 divider...
what do u guys think is the prob?? is it because of mine e6300 sark and cannot break the 450mhz wall or is it this mobo's prob???
btw im using the latest modded bios from rebelshaven

This post has been edited by ben_panced: Sep 19 2007, 11:46 PM

hurmm have u tried running 1:1 divider?
as i recall back, almost all e6300 overclock very well

mine lastime running 450 x7 at default voltage & 470 x7 around 1.46v

yup, when i set the memory divider to 1:1 and fsb to 450mhz, my rig cannot boot, then i tried to increase to vcore to 1.5v, vmch to 1.45v and vdimm to 2.2v but still cannot break the 450mhz fsb wall

This post has been edited by ben_panced: Sep 22 2007, 06:25 PM