Welcome Guest ( Log In | Register )

64 Pages < 1 2 3 4 > » Bottom

Outline · [ Standard ] · Linear+

 LYN Proton Wira Club (LYN-PWC) V-XXIX, All Species of Wira is welcum

views
     
GKWong
post Oct 18 2014, 02:19 PM

jeng jeng jeng~~
******
Senior Member
1,476 posts

Joined: Feb 2006
QUOTE(outpace @ Oct 18 2014, 10:09 AM)
yeah, learned new thing from you every time you bomb me , need to belanjar you makan.

I changed this thing, speedometer switch, and reconnected temp sensor near air box.
http://3.bp.blogspot.com/-MM5jo43nz6c/UFU7...zJY/s1600/k.jpg
erm, should expect nothing other than adjustable from you. OK to get this kind of new one?

http://www.mudah.my/TANABE+SUSTEC+Adjustab...RA-11897725.htm
*
that is a magnetic reed switch for VDO speed sensor... quite popular of having issue for Wira.
HuiChyr
post Oct 19 2014, 08:10 PM

On my way
****
Senior Member
567 posts

Joined: May 2009


QUOTE(outpace @ Oct 18 2014, 09:50 AM)
Only heard or ppl remove it, cause that piece of platinum worth fair bit of money, so many demand for that.
and petrol head want smoother flow. Let us know if you find what price it cost, so can bargain with exhaust installer next time when they want to take mine away.
*
Yeah .. I heard ppl remove it to enhance performance. Saw a video on you tube saying there's a solvent you can buyt to put in gas tank to clean the cat-con as the exhaust comes out. Not sure how it works since combustion change or extinguished the solvent to later come out from exhaust. hmm.gif

Other way is to literally take out the catcon and soak it in detergent and water. Cleaning it manually. thumbup.gif
HuiChyr
post Oct 19 2014, 08:16 PM

On my way
****
Senior Member
567 posts

Joined: May 2009


QUOTE(HuiChyr @ Oct 17 2014, 12:23 AM)
I have a question for sifus here... Plz help  notworthy.gif

I recently changed my aircon compressor and filter. However, the radiator cooling fan always stops when aircon condensor fan is ON. Why? I tot the 2 systems are not connected at all.  rclxub.gif

I noticed this problem when driving on NKVE ... temp gauge was high. Stop at the R&R to check. Radiator fan was not running. Switch off aircon, the radiator fan was running again. Temp gauge keep dropping as I drive.
So continue journey without aircon. Better I sweat than engine overheat. ....
Sigh ... car lover...what to do?  blush.gif
*
To clarify to others may read my post. YES ... aircon and radiator fan for the Wira 1.5manual are separate systems.
So the incident describe above is coincidence. After flushing my radiator and add filtered water + coolant, the temperature is back to normal. thumbup.gif
arza04
post Oct 20 2014, 06:41 PM

Getting Started
**
Junior Member
294 posts

Joined: Nov 2013
Hi, since I bought my wira last year, my headlamp on the left side is always dimmer compare to the right side.
I thought it is normal as the left one is somehow not ORI but local made which the reflector may not doing it works properly

Then, last week my left side bulb exploded biggrin.gif and the housing of the headlamp also crack and have few holes, water can enter the headlamp when it rains heavily

So today I installed Ori Bosch Headlamp, it still dimmer on the left side compare to the right. Also I already change the bulb to osram night breaker still the same

What other cause can it be? hmm.gif
HuiChyr
post Oct 20 2014, 07:37 PM

On my way
****
Senior Member
567 posts

Joined: May 2009


QUOTE(arza04 @ Oct 20 2014, 06:41 PM)
Hi, since I bought my wira last year, my headlamp on the left side is always dimmer compare to the right side.
I thought it is normal as the left one is somehow not ORI but local made which the reflector may not doing it works properly

Then, last week my left side bulb exploded  biggrin.gif and the housing of the headlamp also crack and have few holes, water can enter the headlamp when it rains heavily

So today I installed Ori Bosch Headlamp, it still dimmer on the left side compare to the right. Also I already change the bulb to osram night breaker still the same

What other cause can it be?  hmm.gif
*
Clean the housing where your bulb threads in. You can use tissue or clothe, and do it dry. No problem.
When the contact between the housing and bulb is dirty, the current may "jump" to establish contact. This is call arching. Arching may surge higher voltage than normal. Maybe that's why your bulb blew up.

Hopefully, the voltage can be consistant so the brightness can be same on both lamps. icon_rolleyes.gif
outpace
post Oct 22 2014, 01:02 PM

On my way
****
Junior Member
570 posts

Joined: Jan 2011


QUOTE(GKWong @ Oct 18 2014, 02:19 PM)
that is a magnetic reed switch for VDO speed sensor... quite popular of having issue for Wira.
*
some of the seller can't even understand kilometer switch, left alone the correct term "magnetic reed switch"

I see, it's magnetic reed switch. Thanks

I initially thought my throttle body kong and caused the engine light on sweat.gif
outpace
post Oct 22 2014, 01:03 PM

On my way
****
Junior Member
570 posts

Joined: Jan 2011


QUOTE(arza04 @ Oct 20 2014, 06:41 PM)
Hi, since I bought my wira last year, my headlamp on the left side is always dimmer compare to the right side.
I thought it is normal as the left one is somehow not ORI but local made which the reflector may not doing it works properly

Then, last week my left side bulb exploded  biggrin.gif and the housing of the headlamp also crack and have few holes, water can enter the headlamp when it rains heavily

So today I installed Ori Bosch Headlamp, it still dimmer on the left side compare to the right. Also I already change the bulb to osram night breaker still the same

What other cause can it be?  hmm.gif
*
wa, arching and exploded
wira headlamp is glass made right? dangerous
wira_laju
post Oct 22 2014, 02:05 PM

Getting Started
**
Junior Member
235 posts

Joined: Dec 2011
QUOTE(outpace @ Oct 18 2014, 10:09 AM)
yeah, learned new thing from you every time you bomb me , need to belanjar you makan.

I changed this thing, speedometer switch, and reconnected temp sensor near air box.
http://3.bp.blogspot.com/-MM5jo43nz6c/UFU7...zJY/s1600/k.jpg
erm, should expect nothing other than adjustable from you. OK to get this kind of new one?
how much this thing.my check engine light on after speed more than 110kmh.MR Google say this thing problem.
outpace
post Oct 22 2014, 07:48 PM

On my way
****
Junior Member
570 posts

Joined: Jan 2011


QUOTE(wira_laju @ Oct 22 2014, 02:05 PM)
how much this thing.my check engine light on after speed more than 110kmh.MR Google say this thing problem.
*
spare part shop selling for RM38 only, but need labour to remove the odometer for replacement, don't know how much labour, RM80 100?

wira_laju
post Oct 22 2014, 10:06 PM

Getting Started
**
Junior Member
235 posts

Joined: Dec 2011
QUOTE(outpace @ Oct 22 2014, 07:48 PM)
spare part shop selling for RM38 only, but need labour to remove the odometer for replacement, don't know how much labour, RM80 100?
*
erm.to remove meter need remove dashboard 1st.rm100?.better do it myself..huu.huu.after change o2 sensor my fc improve a lot.
HuiChyr
post Oct 23 2014, 12:39 AM

On my way
****
Senior Member
567 posts

Joined: May 2009


QUOTE(wira_laju @ Oct 22 2014, 10:06 PM)
erm.to remove meter need remove dashboard 1st.rm100?.better do it myself..huu.huu.after change o2 sensor my fc improve a lot.
*
Bro, how much to change O2 sensor? Do you have to reset the ecu after change O2 sensor?
^pomen_GTR^
post Oct 23 2014, 09:52 AM

Regular
******
Senior Member
1,077 posts

Joined: Jan 2013
hye..looking for cheap/used wira plastic headlamp lense that is clear like this:

user posted image

but i just want the lense/front part...not the whole headlamp...

tq...
wira_laju
post Oct 23 2014, 12:59 PM

Getting Started
**
Junior Member
235 posts

Joined: Dec 2011
QUOTE(HuiChyr @ Oct 23 2014, 12:39 AM)
Bro, how much to change O2 sensor? Do you have to reset the ecu after change O2 sensor?
*
150 for wira vdo..my condenser sumbat lah,all aircond workshop recommend long condenser(rm300),2x size from original 1.but i can see it block air to radiator.its ok?
^pomen_GTR^
post Oct 23 2014, 01:25 PM

Regular
******
Senior Member
1,077 posts

Joined: Jan 2013
QUOTE(wira_laju @ Oct 23 2014, 12:59 PM)
150 for wira vdo..my condenser sumbat lah,all aircond workshop recommend long condenser(rm300),2x size from original 1.but i can see it block air to radiator.its ok?
*
its wira 1.6/1.8 condensor...more gooding cold a/c..no problem blocking air...its not like putting a cardboard infront...still got fin for air to radiator
GKWong
post Oct 23 2014, 02:48 PM

jeng jeng jeng~~
******
Senior Member
1,476 posts

Joined: Feb 2006
QUOTE(wira_laju @ Oct 22 2014, 10:06 PM)
erm.to remove meter need remove dashboard 1st.rm100?.better do it myself..huu.huu.after change o2 sensor my fc improve a lot.
*
previously your O2 sensor got fault code or any symptom before u change it?
wira_laju
post Oct 23 2014, 03:05 PM

Getting Started
**
Junior Member
235 posts

Joined: Dec 2011
QUOTE(GKWong @ Oct 23 2014, 02:48 PM)
previously your O2 sensor got fault code or any symptom before u change it?
*
erm.. this (!) always light on at meter..lepas tukar hilang.weird,this symbol for brek right?.
tboxmy
post Oct 23 2014, 04:00 PM

Casual
***
Junior Member
475 posts

Joined: Oct 2006


QUOTE(mxsteven @ Oct 15 2014, 01:57 PM)
Im always 1st tongue.gif
*
Hi,
tboxmy Wira 1.5

tboxmy
post Oct 23 2014, 04:01 PM

Casual
***
Junior Member
475 posts

Joined: Oct 2006


The ride!


Attached thumbnail(s)
Attached Image
GKWong
post Oct 23 2014, 04:07 PM

jeng jeng jeng~~
******
Senior Member
1,476 posts

Joined: Feb 2006
QUOTE(wira_laju @ Oct 23 2014, 03:05 PM)
erm.. this (!) always light on at meter..lepas tukar hilang.weird,this symbol for brek right?.
*
ei.. weird.. that should be brake light
HuiChyr
post Oct 24 2014, 02:10 AM

On my way
****
Senior Member
567 posts

Joined: May 2009


QUOTE(wira_laju @ Oct 23 2014, 12:59 PM)
150 for wira vdo..my condenser sumbat lah,all aircond workshop recommend long condenser(rm300),2x size from original 1.but i can see it block air to radiator.its ok?
*
No need bro. The car aircon is design with the original size just follow the size.
The cooling power must come from the compressor (with the condition that the other components works accordingly). I just changed compressor, aircon is damn cold..which is more than enuf.

So what if you use long condenser, you want to have too cold inside until freezing ... pointless right?
Later affect radiator ... another unnecessary head .... rclxub.gif

64 Pages < 1 2 3 4 > » Top
 

Change to:
| Lo-Fi Version
0.0237sec    0.40    6 queries    GZIP Disabled
Time is now: 28th March 2024 - 11:12 PM