How long and piston saiz???

Any one looking for ARACER - RC1 SUPER ECU (BRAND NEW)?
i can get very low price for this

jack 8mm k125 rod , piston 75, valve 24-27

regarding this post at : http://keklapis3layer.blogspot.my/2015/11/...maha-135lc.html

should i follow this? my LC now have 7k+ millage, should i change the coolant for next service?

daily ride ka sifu?

Already jack + Rod K125??? pehhhh...padu bro!

piston need rebore loose and use forged. daily ride not comfortable. clutch finish fast, unless 5s masuk y15 clutch housing very big can support

Including metzeler sportec street???

That tyre licin when rain. Not recommend unless u are in budget

tapau belang stock je. most belang here all stock, except maybe upgrade CDI

Quick question guys, if water got into my LC135 carb(Standard), how do i drain it ? I understand that there is kind of a screw that you can turn anti clockwise so that the water will be drained out. Do i have to open my coverset to do this ? And which screw is this ? If possible could you guys show me some pictures ?

turn the screw at the bottom of the carb. This will draw out the fuel in the carb's bowl together with the water through a hose out of the carb. Close the screw back when all the water is out, don't let it flow for too long or else you'll draining out fuel instead (can be determined by it smell). There a hole at the left coverset for you to reach the screw at the carb, but then it'll be easier to work if you open the coverset.

Reminder there will be a case the screw is stuck, just spray with wd40 or somewhat grease to loosen it a little. If takboleh jugak, then you need to disassemble the carb and service it all the way

so if my bike not semput or anything. do i need to service the carb? my bike already 5 years. never open or do anything with the engine.

Better be safe than sorry
You dont want your motorcycle die in niddle of journey
Change spark plug and battery also if more than 1 ½ year

change air filter as well.

salam. nak tanya lc135 4s ekzos apa yang best ? bunyi takmau kuat sngat.
dok usha dekat youtube cj ipoh, uma racing, nob1 bunyi ok
block engine 58mm...

ipoh pipe got many new model. bunyi okok. piston 58 only.

cj ipoh just nice

Hello guys. Recently i change my lc135 v4 air filter to K&N washable one. Got pickup but sometimes when shifting gear 2 to 3 and 3 to 4 a bit sluggish. Do i need to do carb setting? Thks in advance. Mine all standard

v2 till v4 uses the mikuni bs25 carb with diaphragm that control the opening of the slide, which needed some air restriction or vacuum to function properly. Yes you need to consider rejetting the carb, but still your carb wont reach its full throttle potential due to low restriction air filter, unless your bike is modded that need more air. Just reinstall the stock paper air filter and the sluggish will be solved.

Refer to previous post or 1st page on piju journey setting the bs25 carb