Go to 192.168.1.1 --->Home --->Smart Config...use PPPoE mode and fill the username and pass...

thnx
its really really really really work


xoxo

No problem bro...

I've try this on the previous setting it work (last 1 month) but It doesn't working now. Any idea how? It's seem like the modem is connected to TM DSLAM but doesn't login (I've provided a correct username and password, the link led is up and the data doesn't show a green light).

but It's still working if I using it as bridged (setup a dialler for it). Any idea how to ask the modem to login to TMNET? why the bridged work and the PPoE doesn't work? any idea??

Im try to connect this riger modem to my belkin wireless router. Anybody can help me. Step-by-step pls. Thanks.

fixed

This post has been edited by zmt: Jan 29 2009, 08:31 AM

guise... how do u reconnect to change ip?
i mean sumtin like dlink router where you could just click the disconnect button in status.

or there is no other way then reboot only?

hi all ... i have a question regarding this modem , i went for a CNY visit to my cousin house and they ask me to change their manual dail to a pppoe method so i try it to the modem interface using 192.168.1.1

after i go in i click smartconfig mode and set the login pass into it then submit , its strange is that after it refresh nothing;s working . the "LINK" LED isnt on nor blinking , i try to login to the interface back but 192.168.1.1 cannot be accessed anymore and the network icon on windows showing limited connetion sign (!)


is the modem spoiled ? if its that so how can it be spoiled by just setting it ?? i even try the reset button , hold it for more than 5 -10 sec and it wont reset . lol .... ... i have also bring it back to my house and try with my line as it thought it may be their line problems and same result in return .


just wish to know if its already faulty ?
dunno the warranty period ... will have to ask ... but for me i would rather get a linksys gateway =.=''since ive been getting complaints from friends about this junky modem

hope u guys can help me indentify the problems thanks in advance

This post has been edited by tks068: Jan 27 2009, 03:09 AM

fixed

This post has been edited by zmt: Jan 29 2009, 08:30 AM

hope someone can help me out .... waitting f ro help thx for helping

[QUOTE]

saya x permah guna riger ni tp dlink dan linksys dah pernah dah so baru2 saya ader ambik package terbaru stremyx 1mbs sekali dgn modem riger db102 ni(selama ini x pernah amik packege sekali modem).saya setting la sebagai router same seperti yang lain2 sebelum nih tp problem yang saya dapati ialah ianya x boleh idle atau saya away sekejap.connection akan lost tetapi masih connected.sebelum ini dgn router2 lain x pernah wjud masalah ini.menyebabkan saya terpaksa restart2 router tu dan cepat bukak browser.lambat skit akan lost balik malah begitu jugak dengan download software.idle skit atau x gunakan jer nak guna balik lost dah.adakah mmg riger modem nih mmg btul seperti kenyataan menyebabkan connection lost spt diatas jd x sesuai dibuat router dan adakah perlu saya tukar jer ker router+modem brand lain?teruk lah mcm nih...sakit ati...

still waitting for help ... pls someone ... thanks for helping

open ie - key in 192.168.1.1 - username:tmadmin/password:tmadmin
click SmartConfig on right side - change mode to PPOE - key in username: abc@streamyx(example) password..... then click submit, wait for a while then click submit again.
wait for for while then click ADMIN at the top.
At the right hand side you will see a list of command. choose Commit &, Reboot.
Click Commit, wait for a while then click Reboot(to save the configuration in the modem). The modem will then reboot.
The third light DATA LED will turn green.

Link LED is for ADSL line, DATA LED for PPOE/PPOA(autoconnect)


before you configure as PPOE or autoconnect, pls try to connect to internet manually. this way you will know whether you your username or port is okay. error code will appear if it fail to connect.

hope it help

nice guide, but one things need to remind.

due to the tm always upgrade his service, sometime the riger modem can't online when set it to PPPoE mode. so, you need reset the riger modem back to bridge mode.

how to reset the riger modem? Power on it, use a pin press reset button about 10-20seconds, Power off it about 5 seconds. then your modem is reset successfully.

riger sucks too much. u cant utilize this modem on 24/7 basis.

HANGS a lot on me.. always crash, etc.

Btw, anyone can guide me which and how many IP FILTER entries that can be removed? cuz i feel that is screwing up the connection stability.

I can't play Garena properly with this modem, 80% cant see my game, even if i tunnel every fags in the room, connection will CRASH!

But this doesn't happen when i was using the Billion Bipac 5112s modem!

This post has been edited by BlackThyra87: Feb 2 2009, 09:39 PM

Does anyone know how to flash this modem?

Recently I reset my modem which I do quite often due to inaccessibility to connect to streamyx. I got impatient and reboot by pressing the on/off switch at the back of the modem during reset.

Now it shows 3 lights
a) Power - red
b) Link - yellow
c) Data - Green

The PC - Green light is not on.

I believe the CMOS/BIOS is corrupted.

Any way to flash the bios? otherwise it'll be a brick.

Link LED has no light means your connection has problem. Did you check the dial tone? Did you use any other house phone with same number?

It can! I experience it first hand too!

Later, I read the manual, it says not in exact words, "to reset modem press once" .

I think it means to just press and release fast. Just like you, I hold it for abt 5-10 seconds. Then I got impatient and switch off and on the modem. And that my friend is how you get a brick! hahaha....

I advise you to call streamyx fast to check your warranty period. They have that in their database. You can exchange one-to-one if your warranty period is not over.

---

Added on February 13, 2009, 11:09 amp/s: Anyone who care to share how to flash a brick modem?

This post has been edited by orangutan: Feb 13 2009, 11:09 AM

What if you are so-called "renting" the modem? With modem included package, does this limit apply? If you are renting, TM is so-called forced to oblige to replace faulty modem.

Need to get my reading specs to read the small prints under T&C perhaps.. hehehehehehe

Hi guys,

After re-starting my modem (using the power button), my modem doesn't seem to remember its previous settings when I enter 192.168.1.1

I tried to set back my old config, but whenever I click "Commit", it will just hang there. Refreshing the page will give a timeout.

I've tried the small "Reset" button (at the back of the modem) a few times, but the result is still the same. Will have whenever I click "Commit".

Anyone have a solution for this?