For me I never bothered at all changing the modem's config from day one.

Just leave it as plain PPPoE bridge and use a high end wireless router(DIR-655 with QoS) with it.
Works like charm.

Again this is the cheapest modem I've ever seen.So cheap that I'll take a China brand over it anyday.

is this modem supposed to be transparent (forward all/every ports to external router) in bridge mode?
why isn't it forwarding relevant ports to my dd-wrt based router (already configured port forwarding in my external router)
do we need to do NAT rules in this modem again?

This post has been edited by shahjees: Dec 9 2008, 06:08 AM

i forwarded both device. works like charm to me.

help!!i got this crappy modem.i already buy switch before i realize it.since i already buy it can someone guide me to how to connect to 2 pc using switch.i already done what mant ppl tell to do .but when i do that i cant connect to the internet anymore?any suggestion?

Please Help!!! After I've read through 14 pages of discussion, it only get me more confuse. And I did try the Auto dial up setting (by adding username and password in PPP interface under Wan) and it shows "link up" but still when i open IE, it does not connect to the internet (am i misunderstanding the auto dial up means?), and i did try enable DHCP and DNS and disable, i did try disable the Router function also. If i ignore and configure the linksys broaband router anyway, i will stuck at step 8, which checking router and computer setting, it will prompt to ask me enter password (believe me, i try all the password i know, include streamyx password, linksys default password "admin", modem default password....), and i don't know what rules...etc...

Modem: Riger DB102
Router: WRT54GS
laptop to connect : 3

I've reset the modem few times, router few times, i still unable to link them up. Modem work perfectly using dial up. Can anyone use the same combination teach me step by step?

Thanks in advance!!!!

This post has been edited by SmilingStar: Dec 14 2008, 02:44 AM

Riger DB102 have 2 versions, the one without smartconfig, just quick configuration only , u need to enable default route

how to enable default route?i think i have the smartconfig since when i go to http://192.168.1.1/ there is smartconfig in the option.

edit:i think just set it to PPPoE mode and fill in the user and password right?but after that i cant connect to internet anymore

This post has been edited by evit: Dec 14 2008, 06:02 PM

I also have the smart config when open the http://192.168.1.1/ i still unable to connect to internet automatically even i set as what everyone said. why? anyone can help?

Hey, need help here. I've tried port forwarding for torrenting and it helps a lot in increasing my download speed and all. In the other hand, it slows down my internet speed for browsing and I mean really slow. When I open a webpage simultaneously with my running bittorrent, I need to refresh the page a couple of time as it keeps losing its connection. But the torrent still running fine.

Just in case for more information, I tried decreasing the upload speed to 1kb so that it wont affected my internet speed. I also realise even when the download speed is low eg. 10kb it still causes the same problem. It's like when I run the azureus it feeds in all the bandwidth leaving a tiny bit for internet browsing.

I believe my port forwarding setup is correct as it does improve my bittorent a lot. But probably there is something that i need to reconfigure to make things right.

Anyone who can help, his or her assistance is greatly appreciated.

To everyone that said got problem with the settings in this modem:

Sorry, I'm no longer using this modem...
So, I can't help you all as I don't know what is happening too...
This is normal especially when you online by routing mode...

EDITED..coz prblm alrdy solved..

This post has been edited by safone: Jan 3 2009, 10:42 PM

hi, can anyone teach me how do i set this modem to work with dlink wireless router dir-300? when i connect the router to this modem, i cant connect to the internet. however if i direct connect to the modem i can conncet to the interner.
please help.

---

Added on January 11, 2009, 2:45 pmits fix. just set my modem to bridge mode.
thanks guy.

This post has been edited by loveuallso: Jan 11 2009, 02:45 PM

Hi, i could not access to my modem configuration using http://192.168.1.1. It slowly loading but doesnt go anywhere. guidance from you guys is really appreciated.

Recently i subcribe the combo package...i dont know how to configure this modem...i want only use the LAN connection to connect internet...not to dial using streamyx dial up...

p/s : nevermind...its already worked...

This post has been edited by afoaszuizm: Jan 14 2009, 01:34 PM

hai all
ok
1st of all,xcuse my english
im very very very poor bout it
huhu

ive got a prob with my modem
im using riger modem (DB102)
i also using CNet 8-port switch
n im streamyx user

ive configured my modem by referring this thread
n 3days ago i can connect to the internet
so do my housemate
we can connect at the same time

but suddenly..
about 2days ago
my housemate cannot connect to the internet
only me can connect to the internet
i dunno what happen

ive already called cust serv
but they always said 'we didnt provide configuration modem'
huhu

i also hv configure again my modem
but the prob is still there
only me can connect to the internet

can anybody help me?
thnx in advance

Do you connect using dial up?

no..
im streamyx combo user
i pay rm110 per month

oh man, so many prob bout this modem and i got 2 pcs to connect all the time... so can i just go to tmnet and exchange another model? since this model cant really support more than 1 connection (without much trouble)...
any tips?

Just go to this site http://koneksen.com/modem/riger-db102/ and follow step by step...i also have 2 pc and im using switch to connect all pc...now all my prob solved...

ok..
ive done it
but, after i submit it..the oper.status showed 'link down'
is it normal?
or abnormal?
huhu