I need to restart back the modem after certain period of time, for instance like 4-5 hours then the connection disconnected automatically.

Fedup gila when in the middle of downloading at night, suddenly see at the morning, the download are not finished. It just happened recently.

Everytime after restarting the modem, have to go to 192.168.1.1 -> SmartConfig -> Click Submit again. Then i can use the internet. How is it possible. Does it suppose to connected directly after we turn on the modem?

Hey guys, just wondering my setting correct or not...help....i cannot login with this new modem..... not familiar with this modem...... help...








questions:
i) DNS setting correct?
ii) login username need included @streamyx.com?
iii) how to know that I'm connected to streamyx?

Help

i)DNS set as automatic
ii) username include @streamyx only without .com
iii) Under the Home -> System view .. look at WAN interface .. if status is green than already have IP, that's mean your internet is already up!

chikern, thanks i will try and see .... thanks for the tips....

my riger DB102 spoilt after 2weeks of using it ... it show HANDSHAKE , yellow color at user interface there .... sad ... i tried wif my aztech 605EU and my line got no problems ...

Luckier than me.

I just got my modem last night. Connected once to activate my strimik using PPPoE. Made some changes to the modem config, and reboot - until now it still show handshake even after I reset it. Stooopido modemo

i hav figure out , the problems is caused by line ...my modem can use d .... use splitter and check if ur phone can use when u plug in the line in ur modem.

I tried both using splitter and direct but to no avail. And yes, I can use my phone. Could it be that stimik connection to my area was disrupted last nite? (the connection failed at about 12.30am). I tried again around 5.45 am with no luck. Now edi in d office. cannot try

I'm gonna try using other modem today (borrow from friend).

---

Added on May 14, 2009, 7:51 amupdate: after replacing the modem withthe old Billion, I got my internet connection back. So it is confirmed that the stupid Riger modem is a joke

This post has been edited by neotoxin: May 14 2009, 07:51 AM

how to set - enable data boost?
it helps?
it shows disabled and i dont know how 2 enable it

---

Added on May 14, 2009, 11:24 amanother thing is my tx line is 1mb
rx line is 24mb

its causing my SNR margin to suffer badly,
called tm twice, and they say they cant reduce the rxline

how do i reduce it from my end?

This post has been edited by aichiban: May 14 2009, 11:24 AM

this riger wireless router is free together with combo streamyx package?
is the wireless router able to block TCP/IP port?
i need to block some port due to some reasons.

192.168.1.1 > SmartConfig > PPPoE mode > Click Submit > Admin > Submit again

My question is why this modem disconnected me and auto change to default (router and bridge mode) after a night? Any1 help pls.

This post has been edited by banKarl: Jun 6 2009, 09:49 AM

hi...hope that somebody can help me here.i just bought streamyx in a box(512kb) about a month ago with a free riger db102 modem but i got connection problem using pppoe mode eversince.after some time (about 9-10 hours) it will suddenly disconnected (or maybe the modem hang...i guess).the 'data' light on the modem will stop blinking and my pc will show 'limited or no connectivity'.i hv to restart the modem everyday to get the connection back.this is not happening when i use bridge mode(manual connection) and why is that?
1 more thing,is there any difference in speed between pppoe mode and bridge mode?

thanks in advance!

hello guys. ive read all the instructions given here and from the net. but still i cant connect to internet when i use riger db102 modem with aztech WL830RT4. i really what seem to be the problem here.

ive set the Riger modem to bridge mode, aztech PPP0E, but failed.
ive reset the button at the back of the Riger modem, and configure the aztech router, and failed.

can somebody give me instructions on how to configure these modem and router pls. ive been working on this for several weeks now. and i cant only connect to the Internet by using Riger modem only.when connected to aztech, i cant establish connection.

pls bro2 otai here.plsss..help me

WTF.. i just get my 4th streamyx line today ... and got FREE modem = this model!!!!! DB102... come in here checking the problems... it seems this modem = sux..... i am waiting for my activation lol so have to wait for few more days..

since i'd be using this modem as the bridged mode, would all these connection timed out, handshakes, etc etc connection and modem problem surfaces if i were to bridge this modem with my linksys wrt54gl router (tomato firmware)?

this modem is not suitable to be used in router mode or ppoe. using this causes it to loss connection after hours of usage.
use it in its original state: bridge. this will give less disconnections.

port forwarding? i can't commit and reboot. it hangs. so my attempt on port forwarding was never a success. read around.. many faces this as well.
but try it. some works. mostly don't.

if data light is OFF. check:
1. phone line is ok?
2. try direct connection which means no splitter used. sometimes faulty splitter.
3. if u usually use auto connection or ppoe or router mode --> look at "smart config" where ur mode should be there. set it ppoe and put in ur streamyx acc + pw.
4. still OFF? call TM.

just trying to help. if u read around this are the possible ways of solving it.
and till today, im still trying to find ways to do port forward.

yep, its hard to save the settings to the modem. im running this modem as bridge mode, but at first i wanna change the ip so it doesnt conflict with my router ip. need to try countless times before the settings is finally set into this modem. well, in the end its done, now its working as it should and till now still no disconnections, 24/7.

id like to know if you are facing the same problems. when had to power off or reset my Riger DB108, the wifi mode will be disabled and I have to loginto the 192.168.1.1 page to set my wifi network again. does this occur to you?

---

Added on August 19, 2009, 2:46 amthis modem aint so good. im going to buy a new modem+wirelessrouter, any suggestions?

This post has been edited by wild_card_my: Aug 19 2009, 02:46 AM

i cant seems to access the modem setup page @ 192.168.1.1
the modem is connected thru my router@192.168.2.1
please advise

May I know what is the difference between DB102 and DB108? Is there any way to disconnect a PPPoE connection via the console/web interface?