Need help here,

I've installed the modem and tried configuring d PPP and stuff. but i doesn't work.

Then i reset it and juz straight away connect using dial up, works but very very very slow and data led not on.

i have been calling up 100 everyday since early last month for technical support. coz this modem have frequent disconnetion. the most i got connected is 20 minutes, then it will take reconnect. sometimes it takes ages to reconnect, so i'll have to restart the modem. WTF is wrong with this modem? shud i get a replacement? any advice?

Are you connect by routing mode??
Because this modem seen like only working in bridging mode...

If your problem persist on bridging mode, then you can use hammer to smash it

how do i setup my streamix with out the step to step cd?
im using this modem provide by tm......

edited: problem solved.... just need to create new dialer.... haha, silly me

This post has been edited by PVCpipe: Nov 5 2008, 10:50 AM

edited

This post has been edited by notystar_exe: Nov 23 2008, 07:09 PM

Ok after totally cracking my head, i have to post my question here

My setup
phone line-->DB102-->Tp link switch-->3 pcs

Ok, ive already tried almost all the router mode set-ups that ive found online, and I've also enabled DHCP, but whatever I do, i can never get the modem to work when using the switch. When connected directly to the modem, the internet works fine, whether in bridge or routing mode. Anyone with a similar setup can pls post their config file so that i can se those settings?

Hi, i'm a noob in networking, can any1 tell me how to setup port forward in riger db102??

Hi there, I need advise from all masters here,
My frenz juz give a linksys WRT54G2 v1 router, I failed to set it up to link with DB102 modem [able to link/surf internet if use DB102 modem only].
What should I put on setup pages and others setting?
Someone help me pls...
Thanks!

hm...settle le.Thanks anyway

This post has been edited by feihii: Dec 2 2008, 11:16 AM

anyone? help pls

follow this steps.
http://portforward.com/english/routers/por.../DB102index.htm
in that page, select the program that u want to do the port forward. after that, follow the given steps properly.

may i ask.. switch is different from router is it?
your switch model is TP-LINK _______ ?

headache-ing now...once my wireless router(WL830LT4) is linked to the modem..can't access the internet via the router..same problem

Yes.....switch is different from router. When using router, modem is set bridge mode, and u deal with router interface. When using switch, modem acts also as router.


So.....anyone using modem/switch combo able to upload their config file???

have u tried this method?
set ur DB102 to PPPOE mode
set 1 ip for the modem, let say 192.168.1.1 (the default).
u set ur pc into 1 ip, let say 192.168.1.5.
other computer set into the same ip range just the last number is unique.
set ur gateway to 192.168.1.1.

tried ald, doesnt work. Problem is i cant access the modem setup whenever i use the switch.

wait..u r saying u cant connect to modem when u connected to to switch..well..what is default gateway at ur lan

---

Added on December 7, 2008, 8:04 pmthen try ping ur gateway..if it has response


juz key in ur gateway address at IE ..n wait for it..sometime..it take 5 minutes for it to response

This post has been edited by amirsubhi: Dec 7 2008, 08:04 PM

Exactly ppl, i cant access my gateway (192.168.1.1) when i connect thru the switch.

maybe you can try change the modem ip (gateway) to 192.168.0.1 and see how....

even ping it didnt gave response?

well try gsan solution

The blue colored modem is the mother of cheap modems.

It's not even worth anything more than being offered for free.

this so called blue modem is problematic when connect with pppoe(router mode).
sometimes also got that problem (can't access config page)
when use default mode, no problem