Original post


Addon:
Official Riger DB102 website

Connect by routing mode


You are not advised to use routing mode on this modem because this modem have time out problem frequently

This post has been edited by tan_pang: Jul 3 2008, 02:52 PM

I didn't use this modem anymore... therefore I can't answer every question in here...

This post has been edited by tan_pang: Dec 23 2008, 01:48 PM

juz want to know anything about this modem
of coz including "How to configure what in this modem/router?"

got some problem about ur settings:
1.)in Home tab, it didnt hv Quick connect, but juz hv Quick Configuration
2.)after disabled Bridged, should i disabled the IGMP also??

you mean after press "submit & reboot", need to reset again??

is auto-login = auto-connect in startup??
if the answer is "Yes", then you are in wrong place
coz, auto connect is not in modem configuration section

check in this thread can help you
http://forum.lowyat.net/index.php?showtopic=311468

benison

juz press the reset button at the back of the modem
then it will bring you back to 'bridging and routing' mode which need to dial

btw, why my connection lag like hell when in routing mode??

This post has been edited by tan_pang: Feb 1 2007, 09:16 PM

i see
then it will make many trouble coz i have 2 pc that need to online at the same time

if use bridging mode
then both of them need to connect 'at the same time'
need very high time accurary...

thats mean you aledi got 1 PPPoE rules with "Default Route" Enable
try to delete the old rules and make again...

that ppp-0 is the new rules you create??
or it been there before you set a new rules??

you can set this router/modem... (i dunno how to say) to 'Bridging', 'Routing', or 'Bridging and Routing' mode
Bridging mode connect like modem
Routing mode connect like router
Bridging and Routing mode...... sorry, i dunno much about that


This post has been edited by tan_pang: Feb 25 2007, 12:57 PM

try reset again
else, maybe the only solution is to call them...

is there any firmware to Riger DB102??

i have try google, but seen like no good result...


This post has been edited by tan_pang: May 8 2007, 03:47 PM

my fren said his fren got problem in this modem
dunno what he had config, it made the modem cant connect
all the 4 light always light on, cant even enter the 192.168.1.1
and this problem cant even been solved by reset the modem...

whats the problem with it??

haha
quite agree...

now having this problem
the solution seen like juz have to make your 2 pc online with bridging mode only...
and it really like what you said, sometimes cant go to the modem configuration page...

there is auto portforward??
i think it is becoz you had tick the "Enable UPnP port mapping (Windows XP Only)" in the BitComet Preferences (assume that you are using BitComet)

This post has been edited by tan_pang: May 10 2007, 07:18 PM

First, go to http://192.168.1.1/
In the username and password field, key in "tmadmin" without the quote mark
(assume that you haven't change the username and password)

Second, go to WAN (or Routing) > PPP
you will see PPP configuration at there

3rd, Press "Add"
at the "PPP Interface - Add" > "Security Information"
key in your streamyx username and password
Submit

after that, refresh the PPP configuration page by press the "Refresh" at there until the "Oper. Status" show "Link Up"

Optional (in "PPP Interface - Add" )
1. You can enable the DHCP if you want
2. You can also enable the DNS too as you like

This post has been edited by tan_pang: May 13 2007, 05:59 PM

1. What does this mean?
it mean you cant connect with routing mode, either becoz of username and password incorrect... or maybe you aledi connected... or the worst... dc
1. you enter the right username and password??
2. are you online with bridging mode now?? disconnect first before you want to make your modem connect automatically

2. What should I do next after getting it to show Link Up (if ever..)?
nothing to do, juz open the IE or Firefox directly, and type http://forum.lowyat.net/

This post has been edited by tan_pang: May 13 2007, 10:50 PM

let you see my previous post...
i also want to find the firmware...
from tmnuts website, they show that the firmware used is 2.5.050830E
but my version is 2.5.050830b.1

reboot the modem??
why you reboot the modem??
you should click "commit" at the "Admin > Commit & Reboot part
reboot the modem without "commit" will make your modem go back to previous state

so... you have success in your portforward...
i think there is no problem at all...

This post has been edited by tan_pang: May 27 2007, 07:55 PM

another reason might be the firewall...
please make sure you have allow the µTorrent traffic in firewall
or make sure the port that your µTorrent used is allow