i think better to use router than that software,

hi, need some help here, i follow the guide n do something on the ppp, and the status show "linkup", but y i still can't connect to internet?can tell me which part i forget to change?n when if I connect the internet myself without do anything in ppp, i can surf internet,I not sure what information i that need to be give, but my modem set as bridge

This post has been edited by Se0ng: Jun 30 2007, 06:19 PM

how come you still cant connect to internet??
after got "Link Up", open IE/FF and type http://forum.lowyat.net/ also cannot connect to here??

I also kinda blur blur, 2day don't know set what inside there, now can oledi, thanks to all the guide ,but c like connection speed not as fast as b4,not sure y, did the dns affect the internet browse speed? are more ip route increase browse speed, or vice versa?

i tracert lowyat, google, get the same result like below, am my router set wrong something?

tracert lowyat.net

Tracing route to lowyat.net [202.190.197.144]
over a maximum of 30 hops:

1 1 ms 1 ms 1 ms 192.168.1.1
2 * * * Request timed out.
3 * * * Request timed out.
4 * * * Request timed out.
5 * * * Request timed out.
6 * * * Request timed out.
7 * * * Request timed out.
8 * * * Request timed out.
9 * * * Request timed out.
10 * * * Request timed out.
11 150 ms 141 ms 49 ms www.lowyat.net [202.190.197.144]

Trace complete.


This post has been edited by Se0ng: Jul 1 2007, 09:50 PM

better use back bridging mode to connect
this modem really have problem in routing mode connection

i also have many experience of "Request time out" problem in routing mode
thats why i using bridging mode

oic, no wonder so hard to browse, i try to set back to bridge mode n c, by the way, i still can use the ppp at routing menu there to auto connect to internet,right?

[updated*] wow, routing mode using this modem really have so many problem, now i change it back to bridge mode, the connection are more better than routing mode, but how to let more than 1 computer connect to the internet without dialing it in bridge mode?r all this has been teach at previous page=.=?when i set it to bridge, and add auto connect into ppp, although it show link up,but i can't connect to internet unless I dial up the connection myself

This post has been edited by Se0ng: Jul 2 2007, 08:42 AM

you MUST dial in bridging mode
and if you want 2 pc or more to online in the same time with bridging mode
you have to make all the pc "dial" at the same time

think i change the modem better, streamyx really sux ever in thier modem, actually, what is PPOA? i use bridge n PPOE oledi,then how bout PPOA?

This post has been edited by Se0ng: Jul 2 2007, 07:58 PM

anyone know how to change the operation mode (GDMT/T1.413/G.Lite) in this modem?

searched through the web configuration but i cant find any option regarding it.

in the modem stats shows my connection is about 1.5mbps but the speed i really get is like 512k while in the G.DMT mode.

so i think that changing the mode will make a difference.

anyone?



Attached thumbnail(s)

if you are not using the Enterprise package of screwmyx
dun use PPPoA
becoz PPPoA is for static ip only

I got tis modem last friday and it was working fine in routing mode. But the modem "kong" on monday, left the power LED on only. So my colleauge exchanged for a new one and it only worked for 1 day...
After reset the modem, the link is up but the i can't even ping the gateway....did i miss up somting?

try connect with bridging mode first
but if you cant even login to the modem
then reset first, and try to login again
else, try to unplug the DSL line
else... smash this modem and ask for a new one...

actually, this modem have something call like bandwith control? like I can restrict how many connection can be make by a computer?If yes, how can I set it?

Hmm... tiring of trying here n there....v jus bought a new modem router.....
and the connection is quite smooth....but havent smash the modem yet...

can anybody show any tutorial of riger DB102 modem full configuration?

i need it..

cz jz apply n finish activating my streamyx..

1st time doin this..

but dunno how to set the setting so that my dl/ul speed for everythg go faster..


This post has been edited by Json188: Aug 27 2007, 07:03 PM

i jus got this modem few days ago. i've done according to below:
Go and click at the WAN Tab and click at PPP.

Set the new interface as:

* PPP interface = 0
* ATM VC = aal5-0
* Protocol = PPoE
* Use DNS = enable
* Security = PAP

Don't forget to set your username as username@streamyx and also your TMNet Streamyx password. When done, click Submit.

Click on ATM VC and make sure interface are set as:

* aal5-0 VPI = 0
* VCI = 35
* MUX = LLC
* Max proto = 2

After that, click on Admin and then Commit and then Reboot.

At my mainpage, the operational status is yellow( Startup handshake). I've check PPP details under WAN, it got this
Oper. Status: Link Down
Last Fail Cause: VC down

any idea???

Broadband provider
ISP/package: Streamyx 512kbps
Location: Cheras

Modem: RIGER DB102
Router: Level One WBR-3406TX wifi router

Problem description:
1. I set the DB102 to PPPOE connection, and yes it can connect to internet, i can surf net no problem
2. I connect the DB102 to Wifi router (Level One WBR-3406TX, router IP=192.168.123.254). But then I only can access to wifi router page, 192.168.123.254, i am not able to access DB102 page 192.168.1.1, so I cannot to the internet

Previously, I was using Aztech ADSL router modem, and with this same wifi router as well, after connected both ADSL and Wifi router, I can access both 192.168.123.154 and 192.168.1.1, then i can disconnect/reconnect streamyx in the 192.168.1.1

Recently my Aztech modem has gone(5 yrs old already), then i got this DB102, I wonder why the same PPPOE connection, with Aztech i have no problem, but with DB102, i cannot connect to Internet?
I think the Wifi router not able to connect with DB102, because in wifi page shown [Gateway: unreachable]

What happen? something wrong with DB102? or with Wifi router???
Anyone can help me???

My home ridger modem also facing problem whereby it connected to streamyx for few minutes then poof dc/not receiving any packets anymore already.. the connection is shared by 5 ppl.

im newbie n kinda noob bout screamyx
n juz got my screamyx yesterday...
when installation..failed at network communication...
then link led keep blinking...
reboot several times but still blink2...
rite now im waitting for da activation of my acc...
is it because of the line...??
or when ur acc not active yet, da link led will blink blink..??
or is it modem faulty..?? i tried to reset da modem but nothing happen...
wut happen if u reset...??

pliz help me...pliz...

Hi, Does anyone here know how to update the firmware for Riger DB102 Modem?

I saw my friend with this modem with the lattest firmware and the connections is quite stable in his place compare to mine.