@yangxi.

My PRoblem Still Canoot Settle...

just curious...why sometime the persistent seeds displays
- "error:connect failed"
or - downloading offset= ....xxx"

but sometime no data been transferred at all ._.?

try uinstall bc and delete Bitcomet folder , reinstall back.

---

Added on September 7, 2007, 12:40 pmthats normal.
some old torrent not support persistent seeds .

This post has been edited by yangxi: Sep 7 2007, 12:40 PM

I'm not sure...but when I see the peer list, sometime it will display its downloading from the persistent seeds, since I can see the transfer rate and also the transferred amount...then suddenly dc-ed from the peers, and display those downloading offset: ... , or the connect error

mmm...anyway, thanks for the descriptions "/

hmm
i am using laptop to BT..
why at my gf hse , my BC can connected and get a very good speed by using port forwarding..(dlink 634M)

but at my house.. i do all the port forwarding... but at the right bottom there shown yellow light and blocked..(dlink 500T)

both modem i use the same port forwarding port..

@vip

did you try turn off your firewall ?

mayb ur area more ip is being blocked by the isp? where else ur gf area less ip are being blocked....

try reconnect a few times until it turns green.....i always did that though.....

and dun on ur BT when u reconnect ur modem.....

http://download.bitcomet.com/achive/BitComet_0.93_setup.exe

BitComet Client Release Notes

v0.93 2007.09.10

Core Improved: improve the stability of persistent seeding

downloading it right now... despite those improvement, for us still depends on luck... if u get good streamyx connection, then everything goes well... if not,

my bitcomet download seem to be limited to below 70kbps, with 60kbps the average. Anyone got any suggestion to improve it? using d-link dsl 520T modem with netgear mr814v2 wireless router.



also my new half open limit = 200

Looks like a seeder problem to me, look at your first file. 0seeders/11connected peers out of total of [0seeders/238peers]

i'm used bitcomet 0.66.I can reach 90kbps

IMO, BitComet 0.66 is very unstable. Don't really like to use it, and weirdly that for me, BitComet 0.9x and Xunlei is better than BitComet 0.66 SE..

even when there is torrent with good seed, i am still averaging 60kbps only

what screwmyx package you subscribed to??

i can get max download speed thanks to yangxi tweaks

the persistent seeding really play an important role to boost my download speed
so far, i can get max download speed using IP 60.50* and 60.48*

---

Added on September 11, 2007, 10:47 pmchange max half-open TCP port to higher value may help ,but make sure you have already applied the TCP port patch before setting to higher value

This post has been edited by gstoh: Sep 11 2007, 10:47 PM

RM66, but i got 2mb line (misscap?) so should get greater than average 60kbps

what TCP port patch?

You sure 'bout that? Check your speed at SpeedTest.net
I think the 2MB is your modem DSLAM(?)[i forgot what it called] speed, not your internet speed.

the aztech modem i used last time show 2048 download and 512 upload. And the speedtest

That's normal 512kbps(kilobits), about 60+ KB/s.
So you do have about your full speed.
The 2048 download and 512 upload is DSLAM speed, not your internet speed.