1 gas tank can last me for months . . so gas will definitely b more cost effective

hi, anyone here has experiences with the Rubine sirocco series? The L shape design solved my house backsplash issue.. but im not sure about the durability of this model...

Hi zheilwane, may I know what are the differences between these models:
1) JQG9009S
2) JQS9011
3) JQG9009T

Can please PM me the price, inclusive installation (remove old hood that comes with ducting) in PJ area? I find my current cooking hood not good for heavy cooking.

Thanks in advance!

This post has been edited by clickNsnap: Sep 25 2020, 01:17 AM

9009s n 9011 old model no longer available, so get jqg9009t latest model with DC motor and super high suction power 1850m3/h.

Hi all, what would be the optimum height of the kitchen hood, and how to measure? Is it from
a) counter top to bottom of the hood, or
b) top of the gas stove to bottom of the hood

My hood is with surround suction plate.

from table to bottom of the hood max 750mm

Thanks sifu. The installer installed my hood about 740mm from countertop to hood (base), or 730mm from countertop to the surround plate.. so I guess it is within the range.
My old hood was installed at 700mm and I hit my head occasionally.

1) If I'm going to buy Teka Linea LDA-TC 90cm Chimney Hood. But i'm totally clueless regarding the ducting part. Scrolling this thread, there's 6" and 7" ducting, so which one should i buy for this hood model? Please advise.

2) is there any ductless range hood around rm700-1k price? Is ELBA EH-E9122ST ductless?

This post has been edited by hirano: Oct 12 2020, 11:52 PM

teka usually is 6" but best call seller to double check

Hi dear friends, I need some recommendations for hob. I've been using Electrolux 90cm 3 burners hob for 5 years, problem is, the burners need to replace every two years, and one burner is rm200+. The technician told me that was the design faulty, better don't replace but buy the new model which the burner problem been solved by new design. I checked on shopee the new Electrolux hob is around rm1200, price is fine but I'm a bit of hesitate tbh. Anyone here also using the new Electrolux new model hob? How is it so far? I'm welcome if you recommend any affordable hob, measurement is 84cm*48cm. Asian cooking style but moderate, we are vegetarian no need super strong flames. Thank you in advance!

this livinox can fit also less than rm 1k, so far no issue with burner

https://www.livinox.my/product/lgh-288-2b-bl/

hi @zheilwane , I'm looking for 2 burner Fotile hob easy flame control similar to GCG 90301. Do you still have that or is there new model? Please PM your price .

same series, two burners will b gcg90201, yes still got

What is the difference between gcg90211 and ghg78211?

GHG newer model with instant ignition, 5kw super flame with 60% efficiency

GCG older model buy removable burner, extra wide design (90cm vs ghg 78cm), equal flame mid and outer ring

Hi zheilwane,
My budget is just around RM1-2K. My main concern is the noise, bcs my kitchen is open and very close to living room. Can you suggest me any brand?

moderate suction = lesser noise
livinox gossan or lapis also ok

high suction = more noise

high suction with low noise = expensive

if planning to use recirculation mode hood only...don't buy Teka...wanna buy the charcoal filter for it is so mafan and more expensive compared to other brands like Electrolux...

Which one would u suggest better. Livinox or Rubine?

both about the same but rubine recently got stock issue (insufficient stock), so i choose livinox

This post has been edited by zheilwane: Oct 21 2020, 11:51 AM