You wanna look it as more actual info to be visit most of banks.

At beside of Cassatte and open small box to access the drain pipe area, also made it look as ugly or dirty on plaster ceiling opening area.

ME with easy clean, just say doing service for 1.5HP for Panasonic is rm130, how about ME's price? If rm50-60 then I'll go for it. Else, I stick to Panasonic as service center and parts shop close to every state got.

Hi, why need to servicing?

I apply additional filter a layer on top of aircond filter and self access to my ME easy clean to blower for free a lease last you 2 to 3 years, unless you dunno how to solve the drain plate overfall water leakage, due to piping stuck and ask aircon man for services is around Rm80 that is very common.

Just now try to clean my my wife kampung York inverter.
Already usage 2 yrs and apply additional filter since day 1.

Hi,

I got this quotation for acson inverter aircond model A5WMY10J + A5LCY10F (1 hp) for RM1370 and York inverter model Y5WMY10JF + Y5SLY10f (1HP) for RM 1460. This is with installation cost (10ft piping, insulation).

Is this price ok?

Hello i have a question, anyone using Daikin Inverter and facing problem with the mother board which located at the Compressor unit? ( outdoor unit ) ?

and the replacement for that could cost around RM400 or more?



i went to 2 electrical shop one recommended daikin and another on recommended york

im not trying to compare the brand,

basically the main concern is either i choose York non inverter unit or Daikin with inverter, is about the main board unit will it spoilt easily ?

or any user facing this problem before?


SHOP A

Daikin 1 HP with inverter RM1500 with Installation
York 1HP non inverter RM980 with Installation
Shop A only a dealer which they will forward the installation to their sub-con


SHOP B

York 1HP non inverter RM1100 with installation
Shop B only sell York , Fujitsu and Mitsubishi
they is dealer and installer as well

FYI i will install in my Bedroom which is 11 x 11 feet...




thanks in advance for the information and reply

For my option and highly recommended you choose an over ME to be save place for easy clean and easy to access blower.

I just realise on York inverter really difficult to remove drain plate and after removed on the air blower was noisy at end blower rubber bearing running noise.

http://www.mitsubishielectricmalaysia.com/...ircond/inverter

This post has been edited by kimsim: Feb 7 2014, 06:30 PM

Kim Sim,

i appreciate your recommendation, but i wont go for york inverter, do answer my question regarding the PCB board 1st can? ( no offense ) =)

if inverter i would choose daikin over york...

Inverter Aircon PCB is the one vulnerable to spoil, and it costs a lot, my previous Hitachi inverter PCB faulty in one year, I got free replacement, it spoiled again in second year, this time no more warranty, so I got Mitsubishi inverter AC, so far it has been more than 1 year and working good.

I am not sure for daikin PCB.

From my friend he works in s'pore airconds services and he told me don't buy daikin brand these is too many troubleshoot already.

Regarding PCB usually will be spoil only at outdoor unit, on my previous airconds installer for my home on Hitachi inverter 1hp, he said the board is around Rm750 for outdoor unit.

But for me on inverter PCB really durable.
ME still offering for 2 years indoor & 10 yrs for compressor and register online

Yes,for my room i got the inverter unit as if turn it on,it will be night till the next morning.the living hall will only be on if there is guess...so thats why i'm choosing just the basic model.

This installer i know should be doing on his own.without attach to any shop...as he did mostly factory and also big projects...hopefully is worth paying the price :-)

Where you buy the additional filter?it wont effect the air blow?

Can buy in "Daiso" Rm5 per package.

Apply for inverter unit, I don't think will reduce airflow.

Just take noted: unless your aircond is Panasonic non inverter deluxe unit really can feels the difference.

Maybe origin already does not feel is cold at all.

Ooo,at daiso...let me think where got daiso near me...haha...nearest is setia city mall...that will also take me time to go there...will try to pay a visit...

Not sure which model is mine...panasonic the most basic model without eco navi and anything...is just a basic aircorn unit. But i've use panasonic before,is not that cooling compare to york...but for home it work just fine as the aircorn and compressor produce less sound compare to york...thats what makes me choose it over york...price diff only 50...although i personally like the york cooling king...

That's right, short period, any will do. But long period, better go for inverter. Some do "attached" to a shop, but they are still a free lancer, most of the air cond man are like this today. Because the shop no need to pay salary, just a some standby fee.

If your room using lots of cotton, better clean the filter every now and then. It will blocked very fast. I won't simply add another filter as it will reduce the air flow. Good or bad I yet to know. But if adding it makes you become lazy, then I would say is very bad. Lots of problems start because we don't check them regularly.

Kiding,
thanks for the reply, did u asked before how much is the PCB for Mitsubishi inverter?

KimSim,
thanks for your feed back, somehow, you recommended me Mitsubishi due to easy cleaning which i can perform myself am i right?

ok if daikin give alot of problem, i would leave it behind, talk about york , the shop told me york dont have inverter they just took other brand inverter and change the branding to York only...

through both of you feed back, i would only consider Mitsubishi Inverter and York Non inverter then... problem now the price for 1 HP is how much?
mind to share? roughly?

thanks

I already install daikin inverter...well,hopefully it'll serve me well for long long time.

I guess all these aircord is ok...but the installer is more important...my installer reccemend me daikin for invertor...he can provide service so no worries there...

if you said is about the installer then may i know how actually the unit should be placing? do they have this kind of guide line?

like compressor must higher than indoor unit? or etc...

Same level is the best. If not, make sure the water outlet from blower unit is laid differently. Usually the installer will look for the best place to install.